m 20 used for sale

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgPackage Mill / TurnPackage Mill / Turn NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C-axis direct drive, speed max.1,200 rpm Integrated balancing system Motorspindle 20-20,000 rpm power 35/25 kW (40/100% ED) tool taper HSK-A63 according D ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

Doosan 3-Axis CNC Vertical Machining Center Heavy-Duty 3-Axis Vertical Machining Center Built for aggressive cutting capacity, this 2018 Doosan Mynx 7500/50 is a robust 3-axis CNC vertical center ideal for heavy part machining and high-productivity workflows. Technical Details ‍ 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Doosan Model: Mynx 7500/50 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1525 mm / 762 mm / 625 mm Table size: 1600 x 750 mm Max. workpiece weight: 1500 kg Spindle speed: 60 – 6000 rpm Spindle motor power: 18.5 / 22 kW Max. torque: 452 Nm Spindle taper: DIN 69871 B SK 50 Distance spindle nose to table: 200 – 825 mm Distance spindle center to column: 785 mm Rapid traverse (X, Y / Z): 30 m/min / 24 m/min Feed rate (X, Y, Z): 1 – 12,000 mm/min  ...

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Technical data: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Mueller Martini Ventura MC 160 - sewing machine year 2016 max. speed 9,600 signatures/h Signatures: length min. 120 mm length max. 425 mm width min. 75 mm width max. 320 mm thickness max. 4 mm Servo Drives Touch Screen Commander control max. 11 stitches Opening 2+2 Venturi jets Belt Delivery 3215.8225 signatures control by ASIR 3 3215.8045 leaf chain for thin signatures 3215.8043 device for thread melting

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

Line for packing apples in 7kg cartons. Producer: Maf Roda, France

Head machine / dough divider W&P, Type: Multimatic MUC-5 -Overhauled- - Gentle dough division - 5 rows - Weight range: 35 - 85g - Capacity: max. 10,000 pcs. / h - Stainless steel - new tapes - Condition: Very good, many parts renewed Viewing and test run are possible.

2 side tables 3 knives Photo cells Program

Inv. Num. : 9057 Type: CTX 310 Producer: DMG MORI Created: 2004 Parameters: Control system: SINUMERIK 840 D Maximum turning length: 450 mm Max. turning diameter: 200 mm Maximum turning diameter over bed: 330 mm Maximum turning diameter over support: 260 mm Maximum length of travel in the X-axis: 160 mm Maximum feed in the Z-axis: 450 mm Maximum spindle speed: 6000 1/min Weight: 3950 kg

Semolina plastering machine MIAG DK 30 drive left, lighting, aluminium frame, 1 spare frame.

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

General SKU223Y098 LocationBarneveld MakeHenschel Main Features MaterialStainless steel Volume40 Ltr. Motor9 KW Specified Features - Hot mixer Hot mixercheck Vessel sizesø 383 x 365 mm With jacketcheck With motor5,5/9 kW, 380 V, 725/1440 rpm Rotor speed725—1440 rpm Pneumatic operated outletcheck Outletø 125 mm MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information Serial845145 Magento base g_extra_specificationsWith control cabinet and additional scraped stirrer insert. Information TypeFM-40D Year of construction1987 Mounted on framecheck With switchgearcheck Floorspace1,60 x 0,80 m Total height2,40 mHot mixersHenschelPlastic machinery > Hot mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome t ...

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 081-BIO – 19.8 kW Manufacturer: MTA S.p.A. CYGNUS TECH CYT 081-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 19.8 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 3.43 Head available bar: 2.03 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 10 Max. Current (A) 19 Starting Current Circuit (A) 102 Protection class: IPX4 Dimensions: Length mm 1960, width mm 810, height mm 1203 Weight kg 457 Connection R 1"1/4 Serial No.: 2200430168 Year of construction 2025 Condition: Optical 1, Technically ok (Bearing Machine)  ...

Mezzanine / Sigma Profilbau / Industrial Platform (Top Condition) For sale is a high-quality mezzanine / Sigma Profilbau built in 2017, ideal for industry, logistics, warehousing or production. The system is solid and suitable for high loads – perfect for expanding storage areas without new construction Technical data: Profile : Sigma Total area: approx. 33 m x 30 m (≈ 990 m²) Floor height (upper edge): approx. 4.10 m Lower edge of the stage: approx. 3.80 m Load capacity: 500 kg/m² Column grid: 2.80 m x 4.40 m Railing height: 1.10 m Stairwell: 1 piece available Year of Make: 2017 Flooring: 38mm wood ⸻ ️ Description: Robust Sigma Profilbau platform Very good condition – can be used again immediately Large contiguous area → ideal for storage, order picking or conveyor technology Flexibly adaptable / expandable thanks to the grid Perfect fo ...

A direct warping machine Karl Mayer is available. Working width: 42inch, yarn feeding: NC. Including memory, roller unit and all reeds. Without creel. An inspection on site is possible.

Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible.

A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible.

Motor protection switch, star-delta switch, reversing switch -Type: MDPPehb -Setting range in amperes: 4.9/5.5 -Number: 16x switches available -Price: per piece -Weight: 2 kg

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Mode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmType of Measuring system Direct measuring systemDirect measuring system ...

Makra Edge Deburring Machine KEG 150 further inventory and ALL prices at: inventar-verkauf.de/id/alesco An efficient and durable edge deburring machine that is suitable for both professional and DIY enthusiasts. With a power of 1050W, this device offers outstanding performance for all kinds of deburring tasks. The infinitely variable speed control allows a maximum speed of up to 25,000 rpm, which enables precise and fast deburring work. The device is used, but has a long service life due to its robust construction and excellent performance. The KEG 150 is a versatile and powerful tool that meets all your edge deburring needs.

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Sealing machine Dimensions de la clutch : 650 x 450 x 170 mm Sealing length : 650 mm Speed : 0 - 12 m/min Sealing temperature : 0 - 250 °C

We offer you oil filters for the engines Liebherr 9508 / 9512, MWM TCG 2015, MAN 51.05504-0110, Outer diameter (A) = 121 mm; Inner diameter (B) = 57 mm; Inner 1 (C) = 53 mm; Outer 1 (D) = 121 mm; Height (H) = 200 mm, with gasket. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, with the exception of one E70. Our mobi ...

Rotary feeder R530 6 buckles Gate folder MBO A56-DC-24 delivery

Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, expansion sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 300 / 450 mm -Submission/Price: complete -Transport dimensions: 450/55/H30 mm -Weight: 2.2 kg

x-travel: 4.000 mm y-travel: 1.200 mm z-travel: 2.000 mm Control: HEIDENHAIN iTNC 530 HSCI total power requirement: 40 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 10,2 x 5,3 m High-performance CNC bed milling machine MTE BF 4200 equipped with HEIDENHAIN iTNC 530 control, ideal for precise machining of large and heavy workpieces up to 13,000 kg. The machine offers generous travels (X: 4,000 mm, Y: 1,200 mm, Z: 2,000 mm), a universal swivel milling head, and a 60-position tool changer. Fully refurbished, the machine is in very good technical and visual condition and ready for immediate operation. • Machine bed, column, and vertical saddle: cast construction, stress-relieved • Milling slide: cast construction • Universal milling head, positioned via Hirth splines, front plane 2.5°, rear plane 2.5° • Oil cooling unit for cooling the main gearbox • Spindle dr ...

First vessel chamber pressure min./max.: -0.1MPa/0MPa, max. second vessel chamber pressure: 0.4MPa, min. process temperature: 0°C, max. vessel chamber process temperature 1/2: 100°C/152°C, vessel chamber volume 1/2: 241l/27l, vessel chamber test pressure 1/2: 0MPa/0.77MPa. Documentation available. An on-site inspection is possible.

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, geared motor -Type: Z10-M1C4 -Speed: 101 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 16 x 30 mm -Design: B6 -Dimensions: 335/185/H160 mm -Weight: 12.7 kg

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg