müller f f used for sale

pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram capacity: 2000 t return capacity: 150 t table-size: 1015 x 1050 mm ram head dimension: 975 x 1050 mm dist. between pillars (left to right): 975 mm dayligth: 1000 mm distance table/ram: 600 - 1000 mm ram stroke: 400 mm table height over floor: 800 mm height over floor: 3650 mm Table ejector: 63 KN Ram ejector: 650 KN Table ejector stroke: 100 mm Ram ejector stroke: 100 mm Lenght of ram slide guiding: 1400 mm : Idle speed downward: 235 mm/s working feed: max. 20 mm/sec Working speed at 10000 KN: 14 mm/s Working speed at 20000 KN: 5 mm/s Idle speed upward: 250 mm/s overtravel time: 220 ms safety distance: 352 mm total power requirement: 194 kW weight of the machine ca.: 105 t dimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 m Technical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector ...

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included

Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Baujahr / Year 2007 - Serial-No. 0360 4211 9 For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360

Kreuzleger / Compensating Stacker Müller Martini Perfetto Amrys Year 2007 - SN. MMZO 1 306 445 - 60 Mechanische Leistung - Meachnic Spped max. 16.000Ex/h Manuals all included --sehr guter Zustand / very good condition--

Fadenheftmaschine - Sewing Machine Müller Martini FK III Format / Size max. 570 x 400mm Anzahl Heftstiche / Number of Stitchers 1 - 12 Anzahl Übernähstiche / overstitches 1 - 6 Anzahl Bänder/ Number of Types 1 - 6 Länge der Heftstiche 16, 24 , 32, 40mm Länge der Übernahstiche 8, 16, 24, 32mm Heftungen / Speed max. 50 Stitching/min.

Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm

pressure: 62 t distance between columns: . mm stroke: 360 mm Table area: 2500x580 mm dayligth: 400 mm diameter - coniflex cutter: Zilinderdurchmesser 200 mm 0: 200 bar Stud passage: 590 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Video: https://www.youtube.com/watch?v=gkuLoo7ABkc The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team  ...

Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mobile 150L vessel with passiv-doubleflap. In M4V steel.

Muller Martini Graph print inserts 22" with 1/4" pitch.

24" printing cassetes for MM Grapha. Gearpits 96. In good condition.

pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printing inserts only for Muller Martini model Grapha: 4 x 16" 4 x 20" and 4 x 24"

6 feeders 1555 1 cover feeder 1529 1 stitching unit 380 – 3 stitching heads HK 75Q 1 three knife trimmer 449 MM 1564 belt delivery 1 MM Apollo 1540 stacker Compressors

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

MM Grahpa 3 tower , unwinder, process unit and rewinder. The machinery is for spare parts.

Printing inserts for Muller Martini Grapha 16". For more info please inquire.

2x cross perforation cylinders 16" in good condition. Available immediately

Numbering and book printing unit 16" for Muller Martini Grapha

22" Cross perforation cilinders for Muller Martini Grapha. Good condition. Available immediately.

2x Muller Martini Progress cross perforation cylinders: 1. One has gear 72 pitc 1/3” 2. One has gear 96 Pitc 1/4” Good condition, no damages. Available immediately.

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

Neuweriger Doppelkopf make W. Müller. With WDS and filter

1 JAKOB MÜLLER direct warper type MW 650, working width up to 650 mm, maximum flange diameter 600 mm, MÜDATA control, warper supplied without creel

Doppelkopf W. Müller 1 channel Material: PVC Good condition

Press force: 1250 KN, Stroke rate: 55 min-1, Plunger adjustment: 75 mm Stroke: 20-120 mm, Motor power: 11 kW, Voltage: 380 V Machine weight: 8.6t Projection: 340 mm, Pusher clamping surface: 620 x 300 mm, Table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, Two-hand control device Demolition at the pestle was professionally repaired.

Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg

General SKU445W1538 LocationBarneveld MakeMüller AG TypeSM 252 No.25213002 Year of construction2013 Main Features Motor3 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter150 mm Number of rotor knives20 Knives staggeredcheck Number of stator knives:2 With hoppercheck Inletø 100 mm Hinged topcheck Motor3,0 kW, 230/400 volt, 1425 rpm Rotor speed100 rpm Capacity50 kg/h Information Mounted on framecheck With switchcheck Weight350 kg CEcheck Floorspace1,20 x 0,60 m Total height1,40 m Extra SpecificationsRotor speed 100 rpm, 20x rotor blades, 2x stator blades, With Colortronic metal seperator, type SF 100GranulatorsMüller AGMills > GranulatorsBrand > Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...

MÜLLER MARTINI 321 Saddle Stitching Line Year: 1992 Configuration: 5 × Feeders 1 × Stitching Unit (Muller Martini 321 Saddle Stitcher) 1 × Three-Knife Trimmer 1 × Stacker 2 × Compressors Including manuals Condition: In good working condition, available directly from our warehouse in 67269 Grünstadt, Germany. A reliable and well-maintained line, ideal for efficient saddle stitching and trimming operations. Ready for inspection and immediate use.

CONTROLS   electronic controls SIEMENS S7 300 PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES   total force (nominal): 250 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1100 mm   height above floor level: 1105 mm   opening in bed (left-right): 1700 mm   opening in bed (front-back): 305 mm SLIDE   table surface (left-right): 2080 mm   table surface (front-back): 1000 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke adjustment: yes   stroke min.: 20 mm   stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS  & ...

Offer 25430 Specifications: - Nominal pumping speed 160 m³/h - Vacuum container VE 350 - 160 350 l - Drive 400 V / 4 kW - Space requirement approx. W 2000 x D 600 x H 1250 mm - Weight approx. 250 kg

Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D

pressure: 1000 t distance between columns: - mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: 8 t multiple images available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data according to Muller Martini

Technical data according to Muller Martini

Technical data according to Muller Martini

The knife, also known as a cutting blade or blade, from Muller Martini with the part number 0440.1689.2 is a mechanical attachment for cutting applications. It has the dimensions 24 x 8 x 24 cm and a weight of 1.9 kg. Knives serve as a precision-cutting tool in various machines and processes to separate materials such as paper, cardboard, films or fabrics cleanly and efficiently. Typical applications can be found in printing presses, converting equipment for paper and cardboard, textile machinery and in the food industry. OEM P/N 0440.1689.2 OEM P/N (Clear) 044016892 Weight 1.9 kg kg Dimensions 24 x 8 x 24 cm Package weight: 1.9 kg Packaging dimensions 24 x 8 x 24 cm

Middle-cut device Three knife trimmer (MM 1565) Double feeder system (3x MM 1551) Stacker (MM 1540 (2009)) Cover feeder (MM 1528)

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg

Muller Martini Progress 24-inch Year : 1989 Print width: 20" Maximum printing speed: 210 m/min Turning crosses: 2 pcs. Cylinder circumference: 24" Printing tower: 5 pcs. Numbering tower: no Color control: no Camera: none, instead BST Webscope mirror roller UV drying: no Spiral folding: 24" Runner: no Unwinder: 2036/2037 and rewinder: 2033

dimensions: 410 x 410 x 860 m Base unit for a Müller swing-arm grinding machine with electrical cabinet. Inside are motor protection switches, fuses, 16 A sockets, etc. The electrical components are shown in photo no. 2. The grinding machine was sold without the base unit at the buyers request. Thebase dimensions are 300 x 300 mm. With modifications, the base unit can be used for any similarly sized machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.