müller f f used for sale

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

The most cost effective solution for extruders up to 2.000 kg/h (over 2.000 kg/h, see our item [SBG800](.germanplast.eu/listings/5070212-italian-fully-automatic-scre enchanger-doctor-blade-system)), You can afford one now to improve your material quality and (your workers job), Available in Ø 400-500-600-700 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Laser and punched screens withstand wear and high temperatures.They can be cleaned in a pyrolytic oven to be re-used several times., Counter-flow cleaning system, suitable for light contamination, is used with economical metal mesh., Compact, very easy maintenance., Low material waste., Contact us with your projects details:, - Kind of material, - MFI, - Throughput rate in kg/h, - % and kind  ...

BANDERA SINGLE LAYER BLOWN FILM EXTRUDER, for LDPE MDPE + RLDPE, 3-stations Piovan volumetric dosing uniit, Screw diam. 80 mm., 200 mm. die, dual-flow Garba Plast head 200 mm (new in 2022), pull off unit, single rewinding unit 1.200 mm. wide, c.a.drive with new inverters, Average throughput rate 100 kg/h, The line can be inspected any time., Recently used for garbage bags, it includes a 1-color printing group, corona treatment, tower included, electric cabinet for conplete management, immediately available, availability: Immediate, PRESENT CONDITIONS: running and testable, ACCESSORIES: corona treatment+1-col. printer

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

Antike Falzniederdruckpresse - Antique Joint nipping machine Krause FNP Baujahr / Year ca. 1950 - Serial-No. 71635 Pressfläche / Press Sie max. 250 x 500mm

Antike Falzmaschine - Antique Folding Machine Guk

Folienschneider / Foil Cutter BAIER FOLSCH Baujahr / Year 1966 - Serial-No. 66236

Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes.

Streifeneinschießer - Tab Inserter Josef Foellmer OK 90 Year 1998 - Serial-No. 91882 mobiler Streifeneinschießer / mobile  Tab Inserter on rolls Höhenverstellbar / Height adjustable Streifeneinleger für alle Druckmaschinentypen Strip feeder for all types of printing machines Der Streifeneinleger Josef Foellmer OK 90 eignet sich perfekt für den Einsatz in Druckmaschinen aller Hersteller. Geeignet für Heidelberg SM52, SM74, SM102, XL106 und CD102 Druckmaschinen.

Size: 440 x 310 mm Equipments: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator ., Capacity: 2000 cps/hr , Filling Type: Piston Filler , Filling Volumes : 500-1000 gr , Controls: Siemens HMI , Cup disinfection: Peroxide , Film Disinfection: UV , Cup Diameter: 120 mm, Film application: Heat sealing and cutting off roll , Over cap: Plastic lid after sealing

The Tetra Pak Frigus 600 ice cream freezer is a specialized machine designed for the production and continuous freezing of ice cream and other frozen desserts. It plays a crucial role in the ice cream manufacturing process, ensuring the product reaches the desired temperature and texture while incorporating air to create a light and creamy consistency., Key Features of the Tetra Pak Frigus 600 Ice Cream Freezer:, - High Capacity: The Frigus 600 is designed to handle significant production volumes, making it suitable for medium to large-scale ice cream production., - Continuous Freezing Process: This machine allows for a continuous freezing process, which is essential for maintaining the texture and quality of ice cream. It helps achieve the right balance of air incorporation (overrun) and uniform freezing., - Precise Temperature Control: The Frigus 600 offers precise temperature and visc ...

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

Metrohm 688 Karl Fischer Drying Oven with Drying Unit

Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used

Welding Fume Extraction, Soldering Suction, Laboratory SuctionHigh Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 DSerien. No. 2902619 year of construction 2004Device air volume flow max. 250 m3/hMinimum air volume flow min. 100 m3/hSeparation efficiency 99.97 %Welding fumes class W3Motor power approx. 0.75 kWNet connection 230 volts, 50 Hz- extraction power infinitely adjustable- 2 pieces extraction connections 45 mm- mechanical air filter (used)- mobile base with 4 fixed castors,

4 pieces damping elements BILZMachine feet, oscillating elementsType Faebi 430 HDBeload 27500-65000 NBload 2750-6500 kgWorking height: 95 mmBase plate: 500 x 500 mm x 10 mmSupport diameter: 315 mmNominal diameter 480 mmAir pressure: max. 6 bar- Fastening thread M20 in the center of the damper- Damper with two-chamber systemvery good conditionIdeal for press, punching machine or punching nibbling machines.Weight per piece: 53 kggood condition; used

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -

Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used

New electric scrubber drier, floor cleaning machine KREMER type KR-FL50AByear of construction 2024Theoretical area output 2000 mª/ hWorking width 510 mmCleaning brush 510 mmBrush speed 175 rpm. Suction lip width 850 mmTank volume pure water: 50 litresTank volume dirty water: 50 litresNoise pollution 66 dBaClimbing capacity 2%Battery voltage 24 volts, 100 AH- battery charger 24 volts- battery 24 volts, 100 AH- one cleaning brush- two separate tanks- without drive drive, the device

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 30 ton Year of manufacturing: 1982

Doka Foot Spindle Lower spindle (height adjustable) for shoring towers. 9.00 kg EUR 35,70 per piece Doka Screw jack foot Bottom spindle (height adjustable) for load-bearing towers. 9.00 kg EUR 35,70 per piece

Kieselguhr filter DELLA TOFFOLA FSB 3 / BA1A -PED 7 - Beer version - Surface area: 3 m2 - Filter elements for beer - Test pressure ASIT 7bar - Pump: Hilge, special for beer - Special fittings for beer - Filter with few hours of service - Filter in good condition

Fully automatic system for filling, sealing and sealing crucibles

Office chairs on 5 castors mi GS Condition New Purchase value 680,- +19 % VAT Immediately available in Blue - Black - Beige -Violet

FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap) Frame width (NB): 800 mm Belt width (GuB): 600 mm Construction height (BH): 435 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor belt Side guide distance: 655 mm Maximum recommended package size: 600 x 450 mm Optionally available: Supports to increase the delivery height Frequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1380 Nominal / outside width in mm: 800 Belt width in mm: 600 Driven: YES Engine type: SEW Getriebemotor KW: 0,25/S1, 0,37/S1 scope of delivery: including side g ...

Complete line for filling cans Very good condition! We have used the plant for dry pipe tobacco. It can be used for all free-flowing products, such as spices, nuts, seeds, gummy bears and many other types of food. All components of the system are coordinated by an experienced team and were used as a complete line. If you want to fill easily free-flowing product into cans or even first into bags and then into cans (both possible), then this is the perfect system for you. The system can be filled into tubular bags as well as directly into cans. The entire plant has a capacity of 30 cans/minute. Some components of the system, such as the capper and the labeller, even have a significantly higher capacity. Adapted for 400 ml cans, we used Obeck and Polipack and both ran perfectly. Other can formats are possible, but the system can be adapted (extra costs apply). The facil ...

Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

Grinding area: 600 x 400 mm Magnetic table Coolant tank various grinding wheels

Cito Pac suppository filling line Filling, cooling, and sealing machine for suppositories in preformed plastic packages. Revision made in 2023 • two filling points • filling machine SFD10CP • dosage per filling point: from 0.5 to 3.5ml • cooling tunnel: KTE-10 CP • cooling path: 25 m (approx) • sealing machine: BST-10 CP • production capacity: up to 10,500 suppositories/hour (approx)

TOFFLON VIALS FILLING LINE The line can be adapted to different production modes and can be flexibly connected to lyophilization systems. --- 1) Tofflon Washing Machine FW03024 Year of manufacturing: 2019 Washing machine for vials. PRODUCTION: Filling range: 2-100 ml (ca) • Cleaning speed: 7ml-100VPM • Operation mode: servo drive OTHER CHARACTERISTICS • Size: 2,335 mm × 2,405 mm x 1,450 mm (ca) • Power (kW): 13-15 (ca) --- 2) Tofflon Tunnel, model FT0110 Year of manufacturing: 2019 For cleaning and filling vials. --- 3) Tofflon Filling and Stoppering Machine, model FF0204 Machine for filling and closing vials. --- 4) Tofflon Capping Machine, model FC0210 Year of manufacturing: 2019 For capping closed vials. PRODUCTION • Production range: 2-100ml • Production speed: 10ml-100VPM • Number of capping heads: 6 OTHER CHARACTE ...

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 1100 to   stroke: 130 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 330 to   stroke: 40 mm V-RING   nominal force: 500 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 960 mm   lower table (front-back): 960 mm   upper table (left-right): 960 mm   upper table (front-back): 960 mm   shut height max.: 470 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 16 mm   coil weight max.: 8 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 8 to   stroke: 700 mm DECOILER   coil weight max.: 8 to   max. diameter of coil: 1800 mm   m ...

sheet width: 1270 mm plate thickness: 2.0 mm daylight opening: 48.0 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm weight of the machine ca.: 465 kg dimensions of the machine ca.: 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for  ...

sheet width: 1020 mm plate thickness: 2.5 mm daylight opening: 48.0 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm weight of the machine ca.: 340 kg dimensions of the machine ca.: 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for t ...

volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...

Net weight= 31 kg,

A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.

-Year 2005 -Suitable for Heidelberg Speedmaster 52 -Size: Max. 370x520 mm, Min. 100x100 mm -Speed: Max. 15000 /Hours -Adjustable Height -Delivery belt with adjustable speed and height

A Brückner high-performance stenter, drying and fixing machine with steam heating is available. Chain type: SK917, min. product width: 600mm, max. product width: 3600mm, infeed length: 5000mm, outfeed length: 5000mm. Documentation available. An on-site inspection is possible.

Key data: 3240 mm, 5 mm

Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Program control via touchscreen (back gauge, bending angle adjustment, stroke of the upper beam, sheet thickness, number of pieces, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Manual and automatic mode possible Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcing rails Operating instructions 5700 kg

Automatic Italian AMS Ferrari bottling line for sale Bottle lifter Posimat Bottle Washer 50-head rotary filling machine AMS Ferrari Capping machine Labeling machine Box former Grouping Well suited for e.g. water bottling, efficient and fast machine

Height=1.1 m, Overall length= 0.777 m, Overall width= 1.244 m, Net weight= 180 kg,

Power : 68kW at TC -25°C (ΔT 6 K) Temperature range : -40°C to 55°C  Flow rate : 90000 m³/h Slats : 495 m² Volume : 117 litres Weight : 923 kg with 6 fans 630mm, with 2 refrigeration circuits at 50% each with defrost heater see nameplate Only been in operation for 1 year, condition as good as new 2 pieces in stock Price on request