müller f f used for sale

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Condition of hydraulic cylinder: unused -Manufacturer: Faroil, double-acting hydraulic cylinder, 160 mm stroke -Type: 6 18. -Piston rod: Ø 25 mm -Hole spacing: 322 mm -Number: 32 cylinders available -Price: per piece -Dimensions: 360/60/H87 mm -Weight: 4.6 kg/pc.

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor -Manufacturer: TGW, Curved roller conveyor ZKRF in-out-KRF with drive -Rolls: Ø 50/77 mm, width up to 410 mm -Speed: 30 m/min -Drive: SEW-Eurodrive 0.37 kW, see photo nameplate -Transport dimensions: 2120/480/H300 mm -Weight: 93 kg with pallet

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor -Manufacturer: TGW, Curved roller conveyor without drive -Rolls: Ø 50/77 mm, width up to 410 mm -Transport dimensions: 1490/480/H190 mm -Weight: 33 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Number: 4 sets of base jaws available -Price: per set -Total dimensions: 90/65/H35 mm / 90/67/H35 mm/ 90/70/H45 mm with screws -Total weight: 1.1 kg/set

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Manufacturer: Fetra, support arm trolley type 4614AS with roll-off protection -Load capacity: 500 kg / 80 kg per level -Support arm length: 600 mm, height adjustable -Chassis: 2 swivel castors with brakes / 2 fixed castors -Shelves: 5 pieces -Total dimensions: 1300/810/H1800 mm -Weight: 114 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

Resistance, wire potentiometer, resistor, DC resistance, radio interference suppression choke, fixed inductors, interference suppression choke -Manufacturer: Fastron, radio interference suppression choke fixed inductors 1000 pieces -Type: MESC-101M-01 -Inductance: 100 µH / 1 A -Price: complete -Transport dimensions: 300/300/H100 mm -Weight: 2.9 kg

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Control panel: Operating terminal control panel including PC Command Panel -Monitor: FlatmanType FK170SBRGD001 -Control cabinet cooling unit: Rittal type SK 3302100 -Individual components: see photos -Total dimensions: 550/600/H870 mm -Weight: 52 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: HBC radiomatic, radio control system for crane remote control -Type: FuSt 671 -Scope of delivery: as per pictures, plug/connection cable (without remote control). -Total dimensions: 320/210/H130 mm -Weight: 3.7 kg

Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nürnberg AEG, gear motor with brake -Gearbox: Lenze 1 i= 31.5 -Speed: approx. 45 rpm -Engine: Katt type FN112 M 4 kW / 1430 rpm -Brake: Lenze 60 Nm -Shaft: Ø 60 x 120 mm -Dimensions: 940/390/H360mm -Weight: 145 kg

Light barrier, safety light curtain, reflection light barrier, light barrier, safety light curtain, reflection light barrier, photoelectric sensor, light sensor, light grid -Manufacturer: ABB Jokab Safety, Light Curtain FRII -4-14-1200 -Protective field height: 1190 mm -Voltage: 24 VDC -Number: 2x module available -Price per piece -Dimensions: 1250/40/H50 mm -Weight: 2.6 kg/piece

Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0313 D 2.0 FKM MS -ID No.: 00077035 -Voltage: 82-148 V -Number: 100 x valve available -Price per piece -Dimensions: 78/33/H51 mm -Weight: 0.2 kg/piece

Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0212 A 3.0 FPM PA -ID No.: 00021315 -Voltage. 24 V -Number: 6x valve available -Price per piece -Dimensions: 62/32/H51 mm -Weight: 0.2 kg/piece

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0312 C 1.8 FKM MS -ID No.: 00088840 -Voltage: 18-33 V -Number: 3x valve available -Price: per piece -Dimensions: 70/32/H51 mm -Weight: 0.3 kg/piece

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor -Manufacturer: Transnorm, roller curve conveyor 90° with drive -Type: TS 2712 -Rolls: Ø 54-84 x 500 mm -Speed: 24 m/min -Drive: SEW-Eurodrive 0.37 kW, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2260/1030/H410 mm -Weight: 99 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor -Manufacturer: Schmid Fördertechnik, roller curve conveyor 90° with drive -Case: stainless steel -Rolls: Ø 55-85 x 500 mm -Speed: 15 m/min -Drive: SEW-Eurodrive, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2000/1200/H830 mm -Weight: 141 kg with pallet

Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers, isolating switching amplifiers -Manufacturer: Pepperl Fuchs, switching amplifier isolating switching amplifier -Type: WE 77/Ex2 -Part.No.: 01543 S -Number: 1x switching amplifier available -Price: per piece -Dimensions: 110/60/H70 mm -Weight: 0.4 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 120/65/H70 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 105/67/H72 mm -Total weight: 2.9 kg

Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: RTZ Witte, worm gear motor -Gearbox: RTZ Antriebstechnik/ Varvel Type FRT 85/B3 1/100 IEC80B14 i= 100 -Speed: approx. 14.3 rpm -Engine: WitteType WW 80-4 -Power: 0.55 kW / 1430 rpm -Protection class: IP55 -Shaft: Ø 32 x 70 mm -Dimensions: 485/210/H320mm -Weight: 22 kg

flat gear motor, gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: SEW-Eurodrive, gear motor parallel shaft gear unit series F -Type: FA27/II2GD EDRS71M4BE1/3D/KCC/TF/AL -Gearbox:Type FA27/A/II2GD i= 50.19 -Speed: 1375/27 rpm -Power: 0.37 kW -Protection class: IP54 -Hollow shaft: Ø 25 x 100 mm -Dimensions: 390/200/H395 mm -Weight: 17 kg

flat gear motor, gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FA27 DT71D4/BMG i=50.19 -Speed: 1380/27 rpm -Power: 0.37 kW -Brake: 5 Nm -Protection class: IP54 -Hollow shaft: Ø 25 x 100 mm -Dimensions: 360/200/H220 mm -Weight: 15 kg

Gearboxes, bevel gears, worm gears, roller conveyor gears -Manufacturer: Düspohl, gearbox with encoder -Translation: i = ? -Hollow shafts: Ø 32 x 80 mm -Shaft distance: 197 to 206 mm, dimensions see photo technical drawing -Encoder: Red Lion Controls 4601200 -Dimensions: 1120/100/H155 mm -Weight: 28 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DNC-50-125-PPV-A unused -Stroke: 125 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm / -Hole diameter: 16 mm / hole spacing retracted 368 mm -max. pressure: 12 bar -Quantity: 59 pieces -Price per piece -Dimensions: 400/65/H65 mm -Weight: 2.4 kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FV67/G DRE100LC4BE5HF/TF -Translation: i= 25.13 -Speed: 58 rpm -Power: 3 kW -Protection class: IP54 -Gear shaft: Ø 47/41.2 x 180 mm -Brake: 28 Nm -Dimensions: 610/360/H260mm -Weight: 70kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FA57/G DRE132S4BE5/TF -Translation: i= 7.73 -Speed:189 rpm -Power: 4 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 165 mm -Brake: 55 Nm -Number: 3x motor available -Price: per piece -Dimensions: 660/350/H280mm -Weight: 78 kg/pc.

Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Fisher, LPG pressure regulator series 912 unused OVP -Type: 912H-108 FS912H-108 -Control range: 0.5-2.5 psi / 3.4-17.2 kPa -p max.: 250 psi / 17,2 bar -Number: 5x pressure regulators available -Price: per piece -Carton dimensions: 90/85/H75 mm -Weight: 0.5 kg/piece

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Gear motor, electric motor, electric gear motor, spur gear motor -Condition: Gear motor is unused -Speed: 215 rpm -Power: 5.5 kW -Shaft: Ø 50 x 100 mm -Protection class: IP55 -Type electric motor: Loher Flender DNGW-132SB04M -Gearbox type: Flender Himmel FZC61-K4 -Dimensions: 870/440/H450mm -Weight: 143 kg

Electric motor, three-phase motor, brake motor -Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from milling machine Deckel FP4L -Power: 4.0 kW -Speed: 1435 rpm -Design: B14 -Protection class: IP 44 -Brake: multi-disc brake type EK5dB24 -Dimensions: 575/270/H225mm -Weight: 64 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 7.00-15 Rim 5.5-15 532/121-2 -Bolt circle: Ø 220 x 20 mm -Recess: Ø 160 mm -Price/Delivery: complete -Dimensions each: Ø 730 x 180 mm -Weight: 85 kg/piece

Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit, swivel gripping unit, universal swivel unit -Manufacturer: Schunk / Festo Universal swivel unit with 2x swivel gripper unit -Swivel unit: Schunk SRU 35 -Swivel gripper unit: Festo HGDS-PP-16-P1-AB 2 pieces -Delivery/Price: complete -Dimensions: 345/240/H150 mm -Weight: 5.1 kg

cloth lapper, polishing wheel, grinding wheel -Manufacturer: Flex, grinding-polishing sleeves grain 600 -Order No.: 318.175 -Diameter: Ø 90 x 100 mm -Use: for satin finishing machine Flex LP 1503 VR -Number: 11x polishing sleeves available -Price: per piece, minimum order 3 pieces -Packaging dimensions: 160/150/H15 mm -Weight: 0.05 kg

Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Fisher, LPG pressure regulator series 912 -Type: 912H-108 -Control range: 0.5-2.7 psi -p max.: 250 psi / 17.2 bar -Dimensions total: 165/70/H85 mm -Weight: 0.5 kg

reflection light barrier, light barrier, reflection light scanner, reflex scanner, light scanner, reflection light barrier, reflex light scanner, through-beam light barrier -Manufacturer:ifm, through-beam sensor, diffuse reflection sensor, receiver -Type: OF5022 OFE-FPKG/US -Number: 2x buttons available -Price: per piece -Dimensions: Ø 12 x 85 mm -Weight: 0.1 kg

quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Recording dimensions: see photos -Number: 2x steel holders available -Price: per piece -Dimensions: 115/55/H130 mm -Weight: 1.5 kg/piece

Reflective light barrier, light barrier, reflective light switch, reflective switch, light switch, reflective light barrier, reflective light switch, one-way light barrier -Manufacturer: ifm, efector200 photoelectric sensor reflective light switch, original packaging -Type: OJ5122 OJB-FPKG/SO/AS -Cardboard dimensions: 95/65/H30 mm -Weight: 0.1 kg

electric motor, three-phase motor -Manufacturer: Lammers, electric motor with fan -Engine: Type 7AA112MO2V -Power: 5.5 kW -Speed: 2900 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Protection class: IP55 -Fan: Wisto Type FLAI Bg112 -Dimensions: 490/220/H290 mm -Weight: 40 kg

Try square, locksmith square, hair square, precision hair square, adjustable hair square, pattern maker square -Manufacturer: Format, Adjustable Hair Angle 100 x 70 -Art.No.: 1405124375 -Measuring ruler: length 60 mm -Number: 3x hair angles available -Price: per piece -Case dimensions: 90/70/H20 mm -Weight: 0.1 kg/piece

Position computer, computer, control unit, robot control, control, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: Grenzebach, computer with monitor -Computer: BR Elektronik Type Mini PC 8000 -Monitor: IQ Automation Flatman TFT display type FK170SBRGD001 -Individual components: see photos -Number: 2x computers with monitor -Price/Distribution: per unit -Transport dimensions: 480/400/H210 mm -Weight: 13 kg/piece

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 5 pieces available -Price: per piece/ 95€ for the whole set. -Dimensions: 310/150/H400 mm -Weight: 6.6 kg/piece

Dosing rotary valve, rotary valve, dosing valve, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw -Manufacturer: Tecom Modena, rotary valve 8 blades type PST 28 D with drive -Speed: 37 rpm -Drive motor: 1.50 kW -Inlet opening: 350 x 250 mm -Outlet: Ø 90 mm / Ø 76 mm -Dimensions total: 970/690/H425 mm -Weight: 146 kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, gearmotor with brake, parallel shaft gear unit series F -Type: FH87/G DRN132M4/BE11HF/TF -Speed: 50 rpm -Power: 7.5 kW -Protection class: IP54 -Hollow shaft: Ø 65 x 280 mm -Brake: 55 Nm -Quantity: 1 piece available -Price: per piece -Dimensions: 800/330/H530 mm -Weight: 190 kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FH87/G DRS132S4BE5HF/TF -Speed: 68 rpm -Power: 5.5 kW -Protection class: IP54 -Hollow shaft: Ø 60 x 280 mm -Brake: 28 Nm -Number: 2x motor available -Price: per piece -Dimensions: 760/335/H530 mm -Weight: 155 kg/piece

gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Bosch WEG, worm gear motor -Gearbox: Bosch Type FRT 3 842 503 063 -Speed: approx. 36 rpm -Motor: WEG type OD 534 T 0.09 kW -Protection class: IP44 -Shaft: Hexagon 17 x 70 mm -Number: 3x gear motor available -Price: per piece -Dimensions: 270/110/H165 mm -Weight: 4.9 kg/pc.

Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Cell wheel lock. 8 blades, with drive -Speed: 49 rpm -Drive motor: CHT 0.75 kW -Inlet/outlet: 250 x 130 mm -Dimensions total: 510/490/H280 mm -Weight: 50 kg

Dosing rotary valve, rotary valve, dosing valve, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw -Rotary valve. 8 blades, without drive -Inlet opening/outlet: 395 x 220 mm -Shaft: Ø 35 x 20 mm -Engine mount: Ø 133 mm bolt circle Ø 164 x 10 mm -Dimensions: 610/430/H405 mm -Weight: 50 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head -Type: F90SD-D125-40-12 -Hole: Ø 40 mm -Dimensions: Ø 125 x 65 mm -Weight: 2.7 kg