müller f f used for sale

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...

In good condition. It is located in Jõhvi. The price is negotiable. First registration: 01.11.1996 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 12130 cm³ Motor power: 309 kW Fuel: Diesel Transmission: Manual Drive Diagram:- Certificate of Registration: EN288616

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Butter milk pump: 3 kW. Feed pump: 3 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h s ...

Volvo FH12, born in 2000, in good condition, located in Jõhvi. The price is negotiable. First registration: 29.12.2000 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 12130 cm³ Motor power: 338 kW Fuel: diesel Gearbox:- Drive Diagram: 6 x 2 Certificate of Incorporation: EN403578

Key data: 2540 mm, 6 mm

Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with display Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 5500 kg

Wheel type disc atomizer with high speed belt driven motor. Motor power: 22 kW - 30 HP. Can be used for a spray dryer with an output up to 1.000 kg/h of powder. Wheel diameter: 210 mm. Stainless steel AISI316L wheel. Sanitary execution. Weight 400 kg., Type of Machine: Atomizer, Capacity: Used for a spray dryer with an output up to 1.000 kg/h of powder, Wheel diameter: 210 mm, Motor: 22 kW - 380 V - 42,5 A - 2.935 rpm - 50 Hz - 3 Ph, Dimensions: 120 x 120 x 235 cm, Weight: 400 kg

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

Engine: Klockner Humboldt Deutz F12L413F, power: 282kW, torque: 1227Nm, cylinders: 12, displacement: 19144cm³. Speed: 55km/h, wheels: 6, skip capacity painted/heaped: 15.3m³/21.1m³. Unladen weight: approx. 23000kg, payload: 32000kg, total weight: approx. 55000kg, machine dimensions X/Y/Z: approx. 7750mm/3650mm/3600mm, operating hours: 10990h. The tipper got new tires from Bridgestone in 2019. Documentation available. On-site inspection is possible.

STUDER Favorit CNC grinding machine

Color: Yellow Used Price per unit = 11.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Used Price per unit = 3.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Original packaging Price per unit = 5.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 5.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Used Price per unit = 3.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Original packaging Price per unit = 28.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 28.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 3.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Used Price per unit = 1.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Original packaging Price per unit = 3.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Used Price per unit = 1.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

spindle diameter: 140 mm x-travel: 6000 mm y-travel: 2400 mm w-axis: . mm ram: horizontal adjustment: . mm ram: diameter: 300 mm spindle taper ISO: 50 turning speeds: 3,15-800 U/min angular milling head: rotary table:: 2250x2250 mm table travel longitudinal: 1600 mm rotary table:: 2250x2250 mm table travel longitudinal: 1600 mm Optional worktop Optional: 2 Collet boring tables The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We loo ...

Sheeter Fritsch Rollfix 3WK 520 for all doughs for rolling out and touring Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine

Boiler Lifter König HK 1100/2400SL for W&P UC80A Boiler - Boiler lifting tipper for Werner & Pfleiderer UC80 A boiler - Manufacturer: König Maschinen - Type: HK 1100 / 2400 SL - 400 volts - 4.5 kW - 50 Hz - Year of construction 2010

Bread press Fortuna Automat A 4 E Dough dividing and rounding machine with stainless steel blade Dough insert 1200 to 3600 g, Dough divider with knitting plate Connection 400V, 16A-CEE plug Used machine from the bakery

Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...

Key data: 3000 mm, 40 mm, 35 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow.  ...

Fortuna Premium K bread roll line Fortuna combined bread roll line Head machine dough part and knitting machine Primus 4-row built in 2019 Spreader belt & proofer with transverse discharge Connection 400V 16-A CEE plug Used machine from the bakery

The machine was brought to a state of technical novelty in 2026, equipped with a pallet lift that allows you to attach goods to the pallet

Bread roll system Stainless steel clad digital control consisting of: Head machine type K5 Weight range up to 110gr Settling device with long-rolling station Trigger length adjustable 60/40 to 60/100cm mobile - Bakery condition/not cleaned

Universal blender Fortschritt Universal Machine Mixer Type 15 Bowl capacity approx. 15 litres with tilt function 180° only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine

grinding diameter: 850 mm grinding length: 4000 mm centre height: 425 mm control: Siemens 8 max. workpiece weight between centres: 3000 kg workpiece weight in steadies max.: 4000 kg max. workpiece weight -without tailstock: 300 kg vertical Stroke: 0 - 90 °/deg. work piece spindle speed: 23 - 230 U/min workpiece-spindlehead motor: 5,3 kW grinding spindle head - swivable: +30 / -10 °/deg. dimensions of grinding wheel: 750 x 125 x 305 mm table feed: 0,01 - 4000 mm/min rapid traverse of table: 10 m/min table swivelabel +/-: +3 / -3 °/deg. grinding wheel speed: 25 - 50 m/sec grinding motor: 19 kW dimensions: 14,0 x 3,13 x 2,6 m total power requirement: kW weight of the machine ca.: 19,4 t dimensions of the machine ca.: m Universal external cylindrical grinding machine, modernised in 2011 Siemens 828D control system Internal grinding head, swivelling MPM grinding wheel balancing machine  ...

Edge banding machine Type: Tempora 45,03L Manufacturer: Format-4 Year: 2023 Installation length: 4230 mm Thickness of edging material: 0.4–3 mm Workpiece thickness: 8-45 mm Control unit smar-touch 10.4" Roving unit up to a height of 45 mm Application unit for processing EVA and PUR adhesives and easy-clean unit Machine in very good condition, under power Find more here - / Contact us at -

Sheeter Fritsch Rollfix 6/650 E Computer Control / Program Control for all doughs for rolling out and touring with reel for rolling up Machine mobile Connection 400V, 16A-CEE plug Used machine

Panel saw Type: K 740 S Manufacturer: Felder Year: 2023 Cutting length: 2500 -3700 mm Formatting sliding table "X-ROLL" Cutting width: 800 – 1250 mm Cutting height: 140 mm Control unit: "Power-Drive" Machine in very good condition, under power Find more here - / Contact us at -

Bread Press Fortuna Semi-Automatic Dough dividing and rounding machine Semi-automatic 30-piece Parting head NEWLY revised only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled

Edhard Gear Set for Filling FunnelProduct descriptionManufacturer: EdhardDishwashers fixedDetails see pictures

Dough dividing and rounding machine Bread Press Fortuna Automatic A 3 H + Partial head reworked with stainless steel knife NEW Dough insert up to 2400g Dough divider 30 pieces Connection 400V, 16A-CEE plug Used machine overhauled

Used Janssen Forming Rollers for Small BiscuitsProduct DescriptionManufacturer: JanssenWidth 240mmSee pictures for details.

Dough Treadmill Double-sidedIdeal for 1 dough parts 2 plantProduct descriptionManufacturer: ReichType: Conveyor belt Total treadmill approx. 14mCondition: used1x Right Left TreadmillCan you adjust whether the dough goes to the right treadmill or right1x L bow treadmillWith lid pendant made of stainless steelDetails see pictures.

used sheeter Fritsch 50/650 EASY  Manufacturer: Fritsch Model: 50/650 EASY Automatic control flour spreader stainless steel Au rolls Belts foldable Details see pictures  Baker's condition Details see pictures.

Used Croissant Wrapping Machine / Winder Fritsch RollexProduct DescriptionManufacturer: FritschType: RollexExterior Dimensions: W: 50 cm, D.: 88 cm, H.: 113 cmThe Fritsch Rollex croissant wrapping machine is a special machine used in bakeries and pastry shops to shape and wrap croissants and croissants automatically and precisely. This machine allows efficient production of uniform and professional-looking croissants by optimally shaping and rolling the dough. The Fritsch Rollex is characterized by its reliability, high performance and

used sheeter Fritsch 30W/650Â Manufacturer: FritschModel: 30W/650Analog controlStainless steel on rollersHinges foldableThe Fritsch 30W/650 sheeter is a special machine used in bakeries and other companies in the food industry to roll out dough evenly and precisely. This machine is usually used for processing dough for croissants, puff pastries, pizza and other baked goods. The Fritsch 30W/650 is designed to roll the dough to the desired thickness and size to create an even texture

Fortuna Roll Press Automatic A3 Dough Dividing Machine Product Description Manufacturer: Fortuna Machine Type: Automatic Machine A3 / Size 3 With two red plastic knitting plates The working chamber height is adjustable Functions: Only cut or cut as well as act Details see pictures.

Heating elements / heating rod for quail Infra AE NewCeramic( 4 pieces )Infra AE:815/685 400V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Infra AE NewCeramic( 4 Pieces )Quail Infra CE 1360/1230 400V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Infra AE NewCeramic( 4 Pieces )Quail Infra EE 1960/1830 400 V Power according to customer specificationsDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 Pieces )Piccolo Cross:925/840 230 V 250W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )Piccolo I:725/640 230V 250W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.

Heating Elements / Heating Rod for Quail Furnace NewCeramic( 4 pieces )Piccolo II:1325/1240 450W-650W or individual specificationDetails see pictureAttention: No shipping only pickup.