müller f f used for sale

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.

Demonstration machineThe professional log band saw for a log diameter of up to 100 cm from Forestor Pilous is the further development of decades of sawmill tradition, specially designed for the sawing professional. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. 5 hydraulic angle stops.2 pieces of stem clamping tool. The saw is standard for blocks up to 7.6 m and can be extended as desired. Automatic feed with infinitely variable speed. Electrical

Band saw Felder FB510, year 2019, very good condition, standard equipmentPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750E, built in 2024, very good condition, electric feed infinitely variable, 5.5 kWPrice subject to change, errors, printing and typesetting errors excepted

Double edging Pilous DB700M, built in 2023, like new, incl. saw blades, 11 kW, approx. 700 kgPrices subject to change, errors, printing and typesetting errors excepted

Pilous CTR520 log band saw, good condition, cutting length 5.8 m, max. 550 mm trunk diameter, 4 kW S1, 3110 mm cutting length, 310 kgPrices subject to change, errors, printing and typesetting errors excepted

Solid band mill for materials up to the diameter of 130 cm. Soft starter is included, with extending sections expandable. Automtic feeder with variable speed. Electrically height adjustment adjustable from control panel. With hydraulic log taber, log turner and clamping tool. CE Technical details: main engine power 22 kW S1 cutting length 6,7 m max. trunk diameter 130 cm weight 2800 kg

The CTR-DB400 sets new standards in precision, efficiency, and ease of use. This compact double edger was specifically developed for businesses that demand the highest cutting quality while minimizing operating costs. With its powerful drive, robust construction, and precise adjustment of the saw units, the CTR-DB400 delivers consistently clean, parallel cuts – ideal for the cost-effective processing of planks, squared timber, and boards. Thanks to its intuitive operation and low-maintenance components, the CTR-DB400 is the perfect solution for small and medium-sized production lines looking to reliably increase their output. Designed, built, and quality-tested in Europe! Made in EU Advantages and Features: - Fixed saw blade, adjustable in 50mm increments for maximum space utilization - Dust extraction directly at the saw blade for optimal dust removal - Carpet with 2 pressure rollers  ...

With strip blade, slightly usedSurface planer:Table dimensions 1800 x 410 mm, Max. chip removal 5 mm, Planer shaft diameter 100 mm, Number of planer blades 4 pieces,Thickness planer:Table dimensions 700 x 406 mm, Max. chip removal 4 mm, Feed speed 8m/min, Motor output power 5 kW S6 400V (4kW S1), Weight, 450 kg

AD planing machine Felder AD741, very good condition, year 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineYear of construction 2022The new FSN dressing thickness planer is characterized by its stable design, the strong machine casting tables with a ground surface and modern handling. The machine is space-saving and extremely convenient when changing from dressing to thickness. The solid guide of the thickness table ensures the best planing quality.A mechanical digital display ensures perfect reading of the thickness height.CE compliant, 100% Made in EU (developed, built, quality tested)

AD planing machine Holzprofi FS41N all incl. very good condition, incl. reversible blade, 2 speeds and feed 6/12 m, 4 kW, 1850 mm table length, 410 mm table width, 4 knives, approx. 470 kgPrices subject to change, errors, printing and typesetting errors excepted

Sliding table saw milling machine Felder KF700S/03, built in 2006, good condition, incl. folding device for feed and tenon slotted hood, 5.5 kW S6, 3200 mm format table length, 3500,6500,8000,10,000 rpm, 780 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineTechnical data:Motor output power 3 hp at 100 % ED, voltage 400V, extraction capacity 3900 m³/h, extraction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kgPrices subject to change, errors, printing and typesetting errors excepted

Circular saw milling machine Bernardo FK2, good condition, 2.2 kW, 450 kgPrices subject to change, errors, printing and typesetting errors excepted

length: 450 mm width: 250 mm height: 1.250 mm accuracy +/-: 1 ° distance between tapping holes: H: 130 mm distance between tapping holes: V: 150 mm distance between tapping holes: H: 70 mm distance between tapping holes: V: 200 mm weight: - kg JOHANN FISCHER - Measuring Angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic multiple drilling machine for chair seats CAMAM mod. FMV/4U with 4 drilling units - N. 4 independent drilling units - Control panel - Year 1996 - CE compliant

Travel X/Y/Z: 600mm/400mm/400mm, spindle taper: ISO40, quill stroke: 100mm, speed: 3150rpm, machine dimensions X/Y/Z: approx. 2000mm/1800mm/1900mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 600mm/400mm/400mm, quill stroke: 1000mm, spindle taper: ISO40, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Treif Flexon, built in 2010 + 2014

RABOLINI IMPERIA C WITH AUTOMATIC FEEDER -Automatic Die cutting machine with Rabolini hot foiling attachment -Year: 1990 -Electromagnetic clutch -Max Sheet Size : 800x1100 mms., Max die cutting size 750x1050 mms. -Control cabin for sheet speed control from 900 / 1600 Sh/hour -Honeycomb plate for hot stamping, 2 chases and frames for die cutting -Three programmable heating zones from control cabin -Rabolini Hot stamping foil unit with programmable pulling rolls -Max pressure power: 280 tons -All parts and accessories -Available in April

50 HL Brewhouse Manufactured by fabdec in 2013 Gas Fired brew house consisting of Mash tun/kettle/hot liquor tank/underback/heat exchanger/wort pump/swing bend plate /work platform/gas burner and associated pipework and fittings This is a SECOND HAND brewhouse and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk For more information and more available stock please visit us at - advancedbrewing.co.uk

FKS Fold Master creasing machine; SN 1019 05, Stacker feeder, counter, delivery, 4 creasing tools, computer control

Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...

1 x Used Wrapping Machine WM FC780 E, age 2005, Unwinder:, Single Reel holder, Max. reel diameter 1,200 mm, Thermoforming machine:, Max. tool size 780 x 570 mm, Max. tool size with pneumatic clamp frame 750 x 570 mm, Max. positive depth 130 mm, Max. negative depth 130 mm, Max. sheet width 810 mm, Max. sheet indexing 570 mm, Max. HIPS sheet thickness 1.8 mm, Max. EPS sheet thickness 3 mm, Max. platen stroke (upper – lower) 150 mm, Heater length 1,775 mm, Clamping force DaN 20,000, Upper heating, installed power Kw 41, Lower heating, installed power Kw 41, Vacuum pump motor Kw 2,2, Platen driving servo motor (each) Kw 7.5, Sheet index servomotor Kw 11, Dry cycle speed 45 Cycles/ min, Processing air pressure 7 bar, Water consumption at + 12° C. 60 L/ min, Air consumption at 7 bar 50 L/ cycle, Cutting Press:, Max. cut dimensions 760 x 550 mm, Platen clamping force DaN 60,000, Upper platen ...

Height=2.28 m, Overall length= 1.82 m, Overall width= 1.47 m, Net weight= 680 kg,

Height=1.87 m, Overall length= 1.2 m, Overall width= 1.42 m, Net weight= 557 kg,

industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

Type: Euroline L-18.5-L-R Type Laminator: KK-88-700-L Availability: from May 2026 Condition: in operation, well-maintained Overall length: 8755 mm Working height/belt height: 900 mm Mains voltage: 3 x 400 V + N + PE , 50 Hz Control voltage: 24 V, DC Air requirements. : 1100 l/min, 6 bar incl. laminator, guillotine, punching and cutting tool, filling station

General SKU334T899 MakeFriedhelm Stechel GmbH LocationBarneveld CEcheck TypeADE120-100 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter748 mm Specified Features - Coating pan MaterialStainless steel 1.4301 (304) Coating pancheck Capacity150 Ltr. Batch sizemax. 130 kg Pan diameter1200 mm Pan depth620 mm In-/Outlet748 mm Motor1,5 kW 230/400 Volt Pan speed19 rpm Information No.D20909 Year of construction2009 Mounted on framecheck Floorspace2,5x1,8 m Total height2,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine.

This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information.

This Vertical Machining centre Hyundai Wia F500D was manufactured in the year 2012 in South Korea ans has 8508 operating hours. It is equipped with a Fanuc i Series. The machine includes a through-spindle coolant capability and a chip conveyor. The technical documentation and electrical schematics are available.

This 5-axis LGB KX45S FIVE 2 was manufactured in 2012, featuring a moving table of 1480 x 1440 mm and a high-speed spindle at 18,000 rpm. It includes a HEIDENHAIN ITNC 530 control, HSK 63A tool holder, and a 24-position tool changer. Ideal for precise, complex machining tasks. If you are looking to get high-quality milling capabilities consider the LGB KX45S FIVE 2 machine we have for sale. Contact us for more information.

This DECKEL FP4A was manufactured in 1994. A vertical machining centre featuring a travel range of X=565mm, Y=505mm, Z=400mm, SK40 tool holder, and a spindle speed of up to 4000 rpm. Consider the opportunity to buy this DECKEL FP4A vertical machining centre. Contact us for more information.

This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine.

This C.B. Ferrari B18 was manufactured in 2002. It is a vertical machining center that has been well-maintained and is ready for immediate use. Consider the opportunity to buy this C.B. Ferrari B18 vertical machining center. Contact us for more information.

This 3-axis FEHLMANN Picomax 82 CNC was manufactured in 1998. It features a Heidenhain TNC 426 control, with travel dimensions of 685/315/540 mm, and a maximum spindle speed of 16,000 rpm. The tool magazine holds 32 tools, SK30, and the machine supports a maximum table load of 250 kg. Consider the opportunity to buy this FEHLMANN Picomax 82 CNC vertical machining centre. Contact us for more information about this machine.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

This 3-axis FAMUP MMV 200/60 was manufactured in 2004. It features a table size of 2400 x 600 mm, with travel distances of X: 1500 mm, Y: 580 mm, and Z: 600 mm. The machine supports a table load up to 2000 kg and includes a high-speed spindle at 10,000 rpm, a 30-tool magazine, and CNC control by Heidenhain TNC 426. Contact us for more information about this machine.

This FORST RTSA 32x1600x630 was manufactured in 2019. Consider the opportunity to buy this FORST RTSA 32x1600x630 sheet metal machine. Contact us for more information.

This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information.

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

This 4-axis Fidia K 165 BSH was manufactured in 2002. It features a PCN775 control unit and a main spindle with a speed range up to 30,000 rpm. The machine dimensions are 3723 mm in length, 3750 mm in width, and 3370 mm in height, supporting a maximum table load of 2000 kg. If you are looking to get high quality milling capabilities consider the Fidia K 165 BSH machine we have for sale. Contact us for more information.

This 3-axis Fidia D165 3A vertical machining center was manufactured in 2001. It features a machining area of 1000x600x500 mm, a table load capacity of 1500 kg, and a high-speed spindle up to 24000 RPM. Equipped with a Fidia C1 controller and a 20-position tool magazine, the machine we have for sale is robust and versatile. Contact us for further details regarding this vertical machining center.

This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information.

This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information.

This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information.

This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, its ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information.