131,093 used machines on RESALE, but how to find them? Machine Search
pressure: 30 t throat: 200 mm stroke: 0 - 60 mm table:: 400 x 600 mm table:: 150 mm - Bohrung no. of strokes: 140 Hub/min bore: 40,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 300 mm total power requirement: 3,0 kW weight: 1.670 kg range L-W-H: 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t throat: 160 mm stroke: 0 - 40 mm table:: 270 x 370 mm table:: 100 mm - Bohrung no. of strokes: 200 Hub/min bore: 25,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 180 mm total power requirement: 0,75 kW weight: 590 kg range L-W-H: 1.168 x 1.010 x 1.670 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...
width of the strips: 150 mm band length: 2000 mm revolutions per minute: 3000 U/min engine output: 4.0 kW weight: 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 2,0 mm tube diameter: 60,0 mm motor: 400 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 1.20 mm ST Shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm roll speed: 16.0 + 32.0 U/min engine output: 0.75 kW weight: 135 kg range L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 2.5 mm ST shaft length: 250 mm roll diameter: 96.0 mm throat: 160 mm roll speed: 6.0 + 13.0 U/min. total power requirement: 1.5 kW weight: 350 kg range L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 1.20 mm ST shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm total power requirement: manuell kW weight of the machine ca.: 50.0 kg dimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the cente ...
0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103760 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width - max.: 1255 mm plate thickness: 4.0 mm ST plate thickness: 2.0 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1.5 ° total power requirement: 5.5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75.0 mm band length: 2000 mm band speed: 30.0 m/sec grinding width: 75 x 430 mm engine output: 3.0 kW weight: 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1270 mm plate thickness: 1.75 mm ST plate thickness: 2.00 mm ALU plate thickness: 2.50 mm KU thickness at Niro-steel: 0.80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60.0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm links capacity 45 degrees: round: 75 mm rechts 0: 30 / 60 U/min. dimensions of saw-blade: 350 x 32 mm weight of the machine ca.: 220 kg Furnishing: - Robust cast iron structure - Gear with bronze wheel and ground / hardened - Steel screw in a special oil bath - Vice with counter-clamping device for - double workpiece clamping - Electric coolant pump for cooling and lubrication of the saw blade Scope of delivery: - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded views - Crane eyes for transport The machine is delivered without a saw blade Special accessories included: - Base cabinet with door (steel frame) The data for this ad was cr ...
width of the strips: 75.0 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 90.0 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with rob ...
width of the strips: 150 mm band length: 2000 mm band speed: 1400 / 2800 U/min tube diameter: 40 - 140 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal ...
table length: 4000 mm table width: 2000 mm burner heads: Precitec Procutter x-axis: 4050 mm z-axis: 150 mm y-axis: 2050 mm total power requirement: 18,0 kW weight of the machine ca.: 18.150 kg dimensions of the machine ca.: 12430 X 5664 X 2310 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm laser capacity in Watt: 4.000 Watt x-axis: 3050 mm z-axis: 150 mm y-axis: 1550 mm burner heads: Precitec HPSSL total power requirement: 22,0 kW weight of the machine ca.: 14.200 kg range L-W-H: 10.360 x 5.110 x 2.310 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional ...
tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu wall strength: 2.0 mm bar material - diameter: 30.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS ...
sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting capacity: 2.0 mm throat: 700 / 280 mm round blank diameter max.: 1000 mm round blank diameter min.: 120 mm speed: 7.0 m/min total power requirement: 1.10 kW weight of the machine ca.: 360 kg range L-W-H: 1400 x 400 x 1150 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch including emergency stop button The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1320 mm plate thickness: 2.5 mm ST thickness at Niro-steel: 1.2 mm blade length: 1350 mm no. of strokes: 34 Hub/min back stop - adjustable: max. 825 mm cutting angle: 1.5 ° work height max.: 810 mm Control: konv. engine output: 3.0 kW weight: 1100 kg range L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connec ...
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 1870 kg. range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 ...
length: 1000 mm width: 750 mm Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397088 The data for this ad was created with ModulMWS - the software solution of ...
plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1250 mm plate thickness: 1.5 mm roll length: 1270 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 400 kg range L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport The ...
width of the strips: 150 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ext ...
cutting diameter: 120 mm capacity 90 degrees: flat: 120 x 102 mm capacity 90 degrees: square: 112 x 112 mm capacity 45 degrees: flat: 78 x 78 mm capacity 45 degrees: round: 80.0 mm capacity 60 degrees: flat: 50 x 43 mm capacity 60 degrees: round: 50.0 mm cutting speed: 35 - 80 m/min saw band length: 1440 x 13.0 x 0.65 mm voltage: 230 V engine output: 1300 Watt weight: 18.0 kg range L-W-H: 520 x 400 x 900 mm Portable metal band saw for cuts between 0° and 60° Dry cutting (no coolant) Up to 60% faster cutting compared to a conventional band saw thanks to the NG system with opposite direction of rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled band tensioner . for checking and setting the correct band tension - Steel vice with prism-shaped guide - Powerful 1300 W motor - Constant Speed setting with current limitation - Stable, robust frame made of sectional stee ...
AMTEC FLOWwrap F3X-3XL50GS - Pendular Knife - Servo Version Flowwrapping machine with double servo motor for packaging wide range of products and large products. Feed table with automatic transport through carriers into the machine. Special guide module for safe product transport within the machine. The pendulum blade, driven by the servo motor, allows unlimited product lengths. Automatic stopping of the machine when no product, thus preventing empty bags. Machine stops at the set position to prevent the film from sticking to the blade. Print mark sensor included. PID temperature control. Easy maintenance. Error diagnosis and clear error display. Suitable for packaging uniform products such as biscuits, cakes, bread, pasta, pharmaceuticals, household appliances, industrial components, etc. Max. film width: 880mm, 1 oscillating knife. - Specifications: 220V, 3,6KW, 20-50 beuetel/min., ma ...
Industrial axial fan 800mm diameter ZIEHL-ABEGG fn80-sdi.6n.v7 NEW! Sold in a box of several pieces manufacturer: ZIEHLL-ABEGG type: FN080-SDI.6N.V7 Axial fan with sickle-shaped aluminum blades Diameter: 800mm Ø airflow: 10000-21000m3/h nominal airflow: 15800m3/h at 140pa air pressure motor power: 1.15kw/0.53kw Nominal values 3. phase~400V D/Y 50Hz 1.55/0.95kW 3.3/1.7A rpm:850/650/min Protection type:IP54 sound level:70 dB COSY 0.69 max temperature range:80°C Motor protection: thermal contact Protective grid type: mesh grid Dimensions (w x h x d) mm: 861 x 861 x 273
Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 505 kg,
Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 350 kg,
Manufacturer: Fässler Model: HMX-400 Year of Manufacture: 2005 Type of Machine : Honing Machine Technical Specifications: - Voltage: 3 × 400 V / PE - Frequency : 50 Hz / 60 Hz - Control Voltage: 24 V DC - Rated Current: 150 A - Connected Load: 95 kVA Find more here - / Contact us at -
Manufacturer: Ficep Model: 601 DE Excalibur Year of Manufacture: 2010 Condition: Used Technical Description - Horizontal drilling head with one spindle - Spindle motor power: 7.5 kW - Clamping device included - Number of spindles: 1 - Drilling diameter: 5 - 40 mm - Air pressure: 0.60 MPa - Power consumption: 13 kW/h - Workpiece length: 12,000 mm - Minimum workpiece size: 100 x 50 x 50 mm - Maximum workpiece size: 12,000 x 610 x 610 mm - Bed travel speed: 35 m/min - Spindle speed: 180 – 1500 rpm - Machine weight: 2000 t Find more here - / Contact us at -
Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 600 kg,
PolyClip FCA 3462, mechanically overhauled, frequency converter removed
Table sheeter Fritsch Mini 520 0.5Lx0.5L Year of manufacture: 2013 Machine technically checked-cleaned with dry ice. Belts have signs of wear. Machine tested
Manufacturer: Ficep Model: 601 DEE Excalibur Year of Manufacture: 2015 Air Pressure: 0.60 MPa Power Consumption: 13 kWh Length of Workpiece: 12,000 mm Minimum Workpiece Size: 100 × 50 × 50 mm Maximum Workpiece Size: 12,000 × 610 × 610 mm Maximum Punching Hole: 40.00 mm Bed Travel Speed: 35 m/min Spindle Speed: 1500 rpm (180–1500) Machine Weight: 2000 t Find more here - / Contact us at -
A Probat coffee grading machine for sorting out defective coffee beans is available. Machine dimensions X/Y/Z: approx. 1200mm/1000mm/1800mm, weight: approx. 450kg. An on-site inspection is possible.
A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
