132,791 used machines on RESALE, but how to find them? Machine Search
sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Video available on our website.: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, ver ...
: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fiber laser cutting machine Type: TruLaser 5030 Fiber Manufacturer: Trumpf Year: 2012 Laser power: 3000 W The machine is also equipped with automation for loading and unloading material in automatic mode. LiftMaster Compact Regularly serviced by TRUMPF branded service Machine in good condition, under power Find more here - / Contact us at -
turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024
Pallet racking, as good as new 108 pitches Multiple available. Manufacturer: Jungheinrich Type: B Specifications: 10 stand frames, approx. 4,500 x 1,100 mm 36 supports, approx. 3,600 x K125 mm mm 72 locking pins Shelf load is 1,600 kg (with evenly distributed load). 2.773,11 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.
dimensions of the machine ca.:3,5 x 2,0 x 2,5 m
x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm
The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
diameter: 400 mm bore: 135 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used 3-jaw chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area:2500 mm Free moveable 6-axis measuring device - operating software - W-Lan - ball tracer
Refer to code 1178 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
32000km, Diesel 2,0 l ECOBlue, Manual gearbox, 3 seater, 5 doors, white, TÜV/AU up to 3/26,...
Rated capacity:360 kVA Rated capacity:360 kW fuel:Diesel tank capacity:800 l Number of working hours:294 h
bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm
Key data: 1000 mm, 450 mm, 600 mm
Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T
bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm
used
bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm
Roller transport Finnrose 3410 mm - Manufacturer Finnrose - Working width 1,400 mm - Roll diameter 65 mm - Roll pitch 100 mm - All wheels with rubber surface - Feed infinitely variable via handwheel - Feed speed approx. 2 - 8 m/min - Length 3,410 mm - Volts, Hz 400 V / 50 HZ - Location, at the warehouse D-32825 Blomberg
Technical specification, FGR S1 FGR M1 FGR L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 30 KW POWER 45 KW, ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm, ROTOR LENGTH 400 mm ROTOR LENGTH 800 mm ROTOR LENGTH 1200 mm, BLADE 7+2 BLADE 14+4 BLADE 21+6, LENGTH 800mm LENGTH 1200mm LENGTH 1600mm, WIDTH 1400mm WIDTH 1480mm WIDTH 1580mm, HEIGHT 2000mm HEIGHT 2000mm HEIGHT 2000mm, fine mills, Mizar Machines mills offer high performance in industrial waste processing and recycling processes. These mills are designed for efficient grinding and granulation of various materials. With their superior crushing capacity and fast processing times, they can effectively process even challenging materials such as metal cables, plastics and electronic waste. The use of durable materials and wear-resistant blades ensures long-lasting and reliable performance. By prioritiz ...
used
bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm
x-travel:1120 mm y-travel:370 mm z-travel:410 mm total power requirement:14,5 kW weight of the machine ca.:3850 kg dimensions of the machine ca.:3,5 x 3,5 x 2,2 m Table dimensions:400 x 1600 mm spindle taper ISO:50
x-travel:1120 mm y-travel:345 mm z-travel:400 mm total power requirement:14,5 kW weight of the machine ca.:3,85 t dimensions of the machine ca.:3.500 x 2.920 x 2.710 mm table-size:1600 x 400 mm spindle taper:SK 50
weight of the machine ca.:50 kg dimensions of the machine ca.:660 x 460 x 280 mm no. of flutes:3 groove width:14/24 mm surface area:570 x 460 mm
Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /
System Installer: DSD Dillinger Stahlbau GmbH Technical Data: - F612 - 2 units each, diameter approx. 0.54m; length approx. 1.5m; volume 155l, built in 1990 - W613 - 1 unit each, diameter approx. 0.46m; length approx. 2.30m; volume approx. 280l, built in 1990 - B613 - 1 unit each, diameter approx. 2.30m; length approx. 2.62m; volume approx. 120l, built in 1990 - 612.3 and 4 - 2 glycol filters each, diameter approx. 0.4m; length approx. 1.6m; weight 0.3t; volume 100l Find more here - / Contact us at -
grinding length:600 mm grinding width:200 mm total power requirement:5 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:3 x 3 m
A-05. Gas Separation System (F-608) Partial system, 1 tank type OKFA 900.140.1.10°/900.MZ.C, Built: 2017 Complete system (control, etc.), functional, cleaned Manufacturer: Otto Klein Filtertechnik Apparatebau/Engineering GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.2m; Length approx. 5.0m; Mass 7.7t; Volume 2400 l; 140 bar; Maximum filling mass: 2377 kg Find more here - / Contact us at -
conveyor belt, The conveyor belt is an important piece of equipment in various industrial applications, designed to efficiently transport materials through different stages of production and processing. Thanks to its robust construction and customizable design, this conveyor system can transport a wide range of materials, from bulk materials to packaged products., With adjustable speed settings and multiple width options, the conveyor can be customized to meet specific operational requirements. Smooth and continuous operation minimizes product damage and ensures safe and efficient material transport. In addition, the modular design allows for easy integration into existing production lines, improving the overall workflow., Safety is a priority, and the conveyor is equipped with features such as emergency stop buttons and guards to ensure a safe working environment, making it an ideal sol ...
2. Other and Auxiliary Systems - SNA-15. Low Voltage Control Technology Switching and control systems Siemens / AEG, system-related, Built: 1991 (Main distribution / Cabinet systems) Manufacturer: Siemens, 8PU:011, 30 fields NS switchgear combination (Motors, shunting distributions, etc.) Technical Data: - 6 relay cabinets - 2 PLC cabinets - 2 converter cabinets for fire extinguishing pumps - NS fuse outputs, etc. Find more here - / Contact us at -
Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm
Article: bar loading magazine Manufacturer: FMB Type: Minimag 18 Yob: 2007 Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures.
Article: bar loading magazine Manufacturer: FMB Type: Minimag 18 Yob: 2007 Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures.
amount: 8 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach W72 WGW 12P9 Ø 38-40 Length= 335mm 10 pieces as new + sealed 1 piece like new + unsealed Price valid for 1 piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width:150 mm material thickness:1,5 mm power requirement:3,0 kW no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:4 weight:0,67 t Dimensions (WxDxH):1,3 x 1,1 x 1,6 m
max. format 52 x 72 cm Year of manufacture 1987 2 printing units + high pile delivery Shed Feeder Suction belt table photoelectron. Side edge control pneumatic side marks Conventional dampening units Plate quick-clamping rails Dry pollinator Grafix Exactomat Stack delivery Reading totalizer: approx. 61 million pressure Delivery date: immediately Price on request. We supply and install worldwide.
material width:300 mm material thickness:- 3,0 mm no. of straightening rolls:7 Stück straightening roll diameter:60 mm weight:0,8 t Dimensions (WxDxH):0,9 x 1,5 x 1,4 m
material width:380 mm coil weight:1,0 t material thickness:2,5 mm coil external diameter:1000 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:90 mm weight:0,8 t Dimensions (WxDxH):0,8 x 1,3 x 1,7 m
Key data: 500 , 400
Available 5 units of Guascor 360. All the accesories (is complete power plant) are also available but you can only take de engines if you want. Power:500kW YOM:1998´ Hours: 60000 h Generator: Leroy Somer Voltage: 400V
- Baking Plate Amount: 76 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,100 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!
Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump
- Baking Plate Amount: 100 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: max. 5.700 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!
Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm
- Baking Plate Amount: 73 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,000 pieces / Hour - Cone Size: max. 230 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Transport Unit with Wafer Turner - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025
Complete baking line capacity: 1000kg/hour. Consisting of: Stainless steel vibrating supply hopper dimensions approx. 1950x1400x1350mm; Conveyor transport belt belt width 400mm; lift height 1900mm; Stainless steel baking oven inlet width approx. 700mm; min. product layer thickness approx. 40 mm max. product layer thickness approx. 70mm; Baking oven equipped with lifting mechanism oven dimensions approx. 6500x1400 mm; Stainless steel cooling tunnel dimensions approx. 3450x1000x1850 mm equipped with metal mesh belt and axial fans; Stainless steel glazing unit salt/glaze belt with agitator on mobile frame; Mobile flavoring dispenser working width approx. 800 mm; Mobile conveyor big-bag transport belt with supply hopper belt width 250 mm height approx. 2800 mm; Stainless steel controling panel; Video of bakeline in process available. Request video by contacting seller.
maximum number of results exceeded
please refine your search
