lynette used for sale

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3000 kg -Chain length: 1.5 m -Number: 1x chain hoists available -Price: per piece -Dimensions: 700/170/H190 mm -Weight: 19 kg

Stereo zoom microscope from Vision Engineering with ergonomic Dynascope head from the LYNX series. The device has two side-mounted fiber optic illumination units (24 VAC, 250 W PSU) as well as an additional camera adapter connector. The microscope is suitable for demanding inspection, control and assembly applications in electronics, precision mechanics and quality assurance. The device is used and shows normal signs of use due to use. Scope of delivery: 1 Vision Engineering LYNX Dynascope stereo zoom microscope 2 fiber optic illumination units 24 VAC 250 W PSU 1 camera adapter bracket side connection cable Model: LYNX Dynascope Series: LYNX Lighting type: Fiber optics (2x) Supply voltage PSU: 24 VAC Lamp power PSU: 250 W Mains voltage PSU: 115 / 230 VAC Fuse PSU: 4 A (115 V) / 2 A (230 V) Connections PSU: LAMP, HEAD ― Length: approx. 70 cm Width: approx. 35 cm Height: ap ...

swing diameter:175 mm centre height:255 mm bed width:190 mm weight of the machine ca.:0,1 t dimensions of the machine ca.:450 x 130 x 500 mm

swing diameter:140 mm bed width:255 mm centre height:320 mm weight of the machine ca.:0,1 t dimensions of the machine ca.:510 x 140 x 610 mm

swing diameter:160 mm centre height:300 mm bed width:280 mm weight of the machine ca.:0,1 t dimensions of the machine ca.:610 x 100 x 650 mm

Passage 645mm Tip height 620mm Board width 700mm Overall height 1230mm see pictures Auction-ID: A7-49782-516

Serial number: L2104250, Power supply - 400V/230V, 50Hz, Power 9,0 kW Auction-ID: A7-40851-4

Three/four jaw chucks in different sizes, incl. Large assortment of clamping jaws, see photos for more details Auction-ID: A7-49942-1023

DOOSAN LYNX 220A CNC lathe was built in 2010 in South Korea by Doosan Infracore. The machine, designed for precision machining of workpieces with a maximum diameter of 510 mm, ensures high accuracy and repeatability of the produced parts for many years of intensive use. The machining process is performed by means of a spindle driven by a high-powered motor. The spindle rotates at a maximum speed of 6000 rpm and operates in two axes, X and Z, with feed of 175 mm and 330 mm respectively. It is supported by a three-row angular contact ball bearing at the front and a single-row cylindrical roller bearing at the rear, which reduces the impact of thermal distortion of the front end and improves the machining precision at high speeds. The DOOSAN LYNX 220A features a 12-position turret with a large 210 mm diameter cam clutch and a 39 kN hydraulic clamp. The turret’s rigid design ensures sta ...

DOOSAN LYNX 220A CNC turning center was built in 2010 in South Korea by Doosan Infracore. The machine is designed for machining workpieces with a maximum diameter of 510 mm. It offers high reliability, precision and repeatability of the produced parts for many years of intensive use, which makes it ideal for both unit and series production. Machining is performed by means of a spindle driven by a high-powered motor. The spindle rotates at a maximum speed of 6000 rpm and operates in two axes, X and Z, with feed of 175 mm and 330 mm respectively. To reduce the impact of thermal expansion of the front end and improve overall precision at high speeds, the spindle is supported by a three-row angular contact ball bearing at the front and a single-row cylindrical roller bearing at the rear. The DOOSAN LYNX 220A features a 12-position turret head with a large 210 mm diameter cam clutch and ...

This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information.

This 5-axis DOOSAN Lynx 2100LSYA lathe was manufactured in 2020. Featuring a SIEMENS SINUMERIK 828D control, it offers spindle speeds up to 6000 rpm and includes a sub-spindle for versatile operations. With a max turning diameter of 300 mm and length of 510 mm, it also has driven tools and rapid traverse rates up to 36 m/min. Consider this Doosan Lynx 2100LSYA lathe, ideal for advanced turning tasks. For more information, please reach out to us.

This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a possible chuck size of up to 8 (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details.

This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details.

This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details.

This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details.

Control Fanuc ... i Series Turning diameter ... 600mm Turning length ... 330mm Inclined bed Spindle bore ... 61mm Turret Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 400mm Axis X ... 205mm Axis Z ... 340mm Rapid traverse of the X axis ... 30m/min Rapid traverse of the Z axis ... 36m/min Spin speed... 0-6000 rpm. Max. spindle torque ... 127Nm Main engine power ... 11/15kW Doosan Robot Cell Assembly: 2x LYNX 2100A + ROBOTEC APC7 (Fanuc AM-100 iC6L) - The machines are supplied with chucks and pliers - High pressure cooling 20bar - Arm for picking up workpieces (Ø65 x L130 mm, weight 3 kg) - Automatic door opening - Spindle bladders for cleaning the clamping jaws - Oil separator - OIL SKIMMER - Tool Load Monitor (works with X-, Z-axis and S-spindle) - Workpiece conveyor The machine is in good condition, possible to test un ...

CNC lathe LYNX 2100 B Manufacturer: DOOSAN Year: 2017 Control Fanuc ... i Series Turning diameter ... 350mm Rotation length ... 330mm inclined bed Spindle bore ... 76mm Turret Machine weight... 2750kg Axis X ... 300mm Axis Z ... 360mm Feed diameter ... 210mm Spindle speed ... 1-4500/min. L x W x H ... 2350x1595x1693mm The machine is in good condition, possible to test under electricity.

Inv. Num. : 7971 Type: Lynx 2100 LYB Producer: Doosan Created: 2022 Parameters: Control system: Siemens Sinumerik 828D Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum length of travel in the X-axis: 205 mm Maximum length of travel in the Y-axis: 105 mm Maximum feed in the Z-axis: 560 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Length: 2880 mm Width: 1711 mm Height: 1921 mm Weight: 3900 kg

CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t, 10 tool turret tailstock, bar feeder The machine can be seen under power in our warehouse (M i m u)

DAEWOO LYNX 200B LATHE with FANUC control system

Manufacturer : FRAVIZEL Model: Lynx + Halley MFCR55 Type of Machine : wire saw systems for block mining in a quarry. Year of Manufacture: 2022 Commissioned: 2023 Condition: The machine is relatively new and have seen little use. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 370 mm, 712 mm, 3500 1/min

DOOSAN LYNX300M (34000euro) -:CNC FANUC - Chuck diameter: 250 mm - Diameter over bed: 651 mm - Max. turning diameter: 370 mm - Max. turning length: 712 mm - Spindle bore: 76 mm - Spindle speed: 3,500 rpm - C-axis - Main spindle motor: 15 kW - Rapid feeds X/Z: 30/24 m/min - BMT 55 turret: 12 positions - Rotating tool speed: 5,000 rpm - Machine weight: 4.5 t - Overall dimensions: 3 x 1.8 x 1.7 m

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

workpiece weight: 279 KG length: ca. von Bett bis Lynette mm : 189 € . max: durchlass 369 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Type: LYNX 220 C Manufacturer: Doosan Year: 2008 Control: Fanuc Hours: 17100 Spindle overhaul in 2025 Max. turning diameter: 320 mm Max. turning length: 305 mm Swing diameter over bed: 510 mm Swing diameter over slide: 290 mm X: 175 mm Z: 330 mm Spindle speed: 4000 rpm Spindle passage: 76 mm Bar capacity: 65 mm Turret: 12 positions Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

CMC Lynx 75 BC, Year 2000, Size: 750 mm, glue types:, - cold PVA glue, - warm animal glue, 3 phases 380 volts, warm glue by heating from under the bin, the bin is a double wall water filled model, glue rollers have been grinded

General Manufacturer: Doosan Type: Lynx 2100LMSA Year of manufacture: 2018 Control: Fanuc iSeries Travel: X 205 mm Z 560 mm Rapid traverse X/Z: 30/36 m/min Capacity Turning diameter: max. 300 mm Turning length: max 510 mm Main spindle Spindle speed: 6,000 rpm Spindle power: 15 kW Spindle Torque: 127 Nm Revolver Number of tools: 12 Dimensions and weight Dimensions: L 2,805 mm x H 1,693 mm x W 1,595 mm Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Boss 552 32 L Bar Feeder, Year 2018 Sub-spindle AGW Tool holder BMT45 Parts catcher

turning diameter: 250 mm turning length: 510 mm control: Fanuc I Series total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a visit and test drive is possible by prior arrangement. - Spindle passage 65 mm - without driven tools, with replaced bearings and belts.

Height=0.395 m, Overall length= 0.53 m, Overall width= 0.49 m, Net weight= 50 kg,

Key data: 680 mm, 1300 mm, 4000 1/min

Year of construction 2003 Spindle Hours 11600 Siemens Control 810D max. circulation 680 mm Circulation via X-guide 565 mm Longitudinal travel 1300 mm Planweg mm 315 Spindle head h5 Spindle diameter in front bearing 150 mm Spindle bore 107 mm Chuck diameter 315 mm max. torque 600 Nm Spindle speed 4000 rpm Rapid traverse X-axis 60 m/min Rapid traverse Z-axis 45 m/min Tool carrier for 12 tools Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Dimensions of the machine with chip conveyor L/W/H 570/2600/2210 mm Machine weight approx. 10000 kg Accessories: Bezel clamping range 30-245 mm Conveyor Lathe chuck

Hydraulic motor, oil motor, hydraulic pump -Motor: unused -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 62 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 360/150/H150 mm -Weight: 23 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

Key data: 320 mm, 305 mm, 5000 1/min

FANUC i Series Control 12-station turret (not driven) Travel X= 175, Z= 330 mm Bar Passage 51 mm Tailstock Chip tank IEMCA BOSS 545/32 E Bar Feeder

Color fill control to detect undermixing, size, location, fragments, and trapping Adjustable lighting Max. width of the blister web 320 mm Application: For tablets/oblongs/dragees/hard and soft gelatin capsules Test criteria: color/presence/size/shape/circumference/location/fragments/overfill 21 CFR Part 11 compliant Format versions are stored separately All system units installed in one box Update to the latest version by manufacturer Scanware possible

Lynx LWP 96 E M 3Ph: Nowoczesna Pompa Ciepła Powietrze-Woda dla Twojego Domu Szukasz efektywnego i ekologicznego sposobu na ogrzewanie swojego domu? Poznaj lynx LWP 96 E M 3Ph – nowoczesną pompę ciepła powietrze-woda, która wykorzystuje naturalny czynnik chłodniczy R290 (propane). Dzięki kompaktowej konstrukcji monoblokowej, ta pompa łączy w sobie wysoką efektywność, niezawodność i trwałość, co czyni ją idealnym rozwiązaniem dla większych domów jednorodzinnych, budynków wielorodzinnych oraz obiektów komercyjnych z wyższym zapotrzebowaniem na ciepło. Europejska Jakość – Wyprodukowana w Polsce Luchs LWP 96 E M 3Ph jest produkowana w Polsce, zgodnie z rygorystycznymi europejskimi normami jakości i bezpieczeństwa. Dzięki precyzyjnemu wykonaniu oraz zastosowaniu trwałych komponentów, ta pompa ciepła oferuje doskonałe połączenie efektywności en ...

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Key data: 510 mm, 1500 mm, 300 U/min

Hello, I get this lathe at the beginning of August. With a lot of accessories: steady rest, lathe chuck – clamping jaws, quick-change holder and.. Heidenreich & Harbeck Type Hanseat 480 Year of manufacture 1980 Center height 255 mm Turning diameter over support 300 mm Center width 1500 mm 24 speeds from 23.6 to 2500 n1/min Tailstock MK 4 Chuck F 250 Motor 380 Volt 11 kW Transport dimensions: Length 3200 mm Width 1200 mm Height 1550 mm Weight 2.5 to. Lathe Hanseat 480 incl. accessories St Description 1 instruction manual 1 Lynette small 1 Lynette large 1 4- Jaw chuck small 1 4- Jaw chuck large 15 quick-change tool holders Set designation 2 jaws for 4-jaw chuck 38 jaws for 3-jaw chuck

grinding length: 800 mm centre height: 150 mm Control: FANUC grinding wheel size: max. 400 x 63 x 127 mm workpiece weight: 120 kg engine output: 7,5 kW turning speed range - grinding wheel: 45 m/s m/s swivelling range: +45/-15° Grad work piece spindle speed: 22-313 / 51-750 U/min workpiece spindle swivable +/-: 90 ° tailstock quill taper MT: MK 4 x-travel: 355 mm z-travel: 4,0 mm Working speed: 0 + 7,5 m/min weight of the machine ca.: 4,0 t dimensions of the machine ca.: BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1200 mm turning diameter over slide rest: . mm turning length: 5000 mm digital readout: Digitalanzeige centre height: 600 mm : 55 PS spindle turning speed range: 5-1000 U/min Rapid movement: längs 4000 mm/min accessories:: Futter, Planscheibe accessories:: Stahlhalter, Lynetten Weight without Lynette: zwischen Spitzen 8000 kg Weight with Lynette: zwischen Spitzen 11500 kg Rapid movement: quer 2000 mm/min total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling ...

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.

Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.

Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

Details Machine no. 2042.6616-05 Year of manufacture 2004 Circumferential diameter over bed 1,000 mm Circumferential diameter over bed 1,000 mm Center height over flat web 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Three-phase motor infinitely variable (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control system Manualplus 4110, completely renewed about 1 to 2 years ago 2 Lynettes Equipped with rotary power chuck, diameter approx. 500 mm. Including a lot of accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix base holders, size D. Machine was equipped with a separate milling device, with its own control system, value approx. € 20,000.00. Only served by the owner, ver ...

Key data: 340 mm

Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes

Bezel, setting stick, lynette -Bench: for crankshaft grinding machine -Max. flow rate: Ø mm -Peak height: 225 mm -Technical drawing: see photos -Dimensions: 385/115/H265 mm -Weight: 20 kg