lvd emf om used for sale

This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information.

Omron Solid State Relay Item number: G3PB-225B-VD INPUT 12 – 24 V DC LOAD 50/60 Hz 100 – 240 V AC, 25 A switching load for switching temperature loads Mint condition !

Hot platen press Brand: OMC Type: PL 90s New machine Technical data Plate size: 3000 x 1300 mm Stroke: 400 mm Stroke type: Upward stroke (from bottom to top) Plate type: Elkom electronic plates Press force: 90 tons on 80% of the surface Press cylinder: 6 x Ø 70 mm Specific pressure: 2.05 kg/cm² on 100% of the surface, 2.56 kg/cm² on 80% of the surface Loading and unloading side: 3000 mm Heating system: Electronic 25.4 kW, maximum temperature of 120°C Automatic opening with timer Control panel: Standard Connection: 400 V, 50 Hz, 3 ph Safety device: Safety cable around the entire press Emergency button Two-hand operation CE standard Press structure The press structure is made of composite and welded steel. The structure of both the fixed and moving platen is made of composite and welded steel. The press is equipped with a rack and pinion guide system to ensure perfect parallel move ...

Bending press model PPC/e 120 ton 2000x1400 mm Arranged for high frequency technology TECHNICAL CHARACTERISTICS Platens size 2000x1400 mm Platens Arranged for High Frequency technology Supports for molds Included for 2 compartments (molds are not included) Pressing cylinders N° 6 cylinders Ø 85 mm Stroke 650 mm Opening size 1200 mm Type of stroke Driving platen: lower (from bottom to top) Total thrust 120 ton Specific pressure 4,28 kg / cm2 Control Board Standard panel; electrical panel with double button and adjustable pressure gauge with pressure recovery. Opening Automatic with timer Power supply 400V, 50Hz, 3ph Safety devices - Emergency button - Two hands control - Manual closing guillotine protection on front - Metallic protective nets on the sides - Aluminum foil connected to the generator Normative CE standards Press Structure The press structure is made of S275JR beams  ...

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Application area: outdoor -Length: 147 m -Price: complete -Dimensions roll: Ø 900 x 485 mm -Weight: 25 kg

Power cables, solar cables, fiber optic cables, fiber optic lines, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Area of application: Outdoor area -Length: 217 m Price: complete -Roll dimensions: Ø 750 x 410 mm -Weight: 20 kg

Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Application area: outdoor -Length: 120 m -Price: complete -Dimensions roll: Ø 900 x 510 mm -Weight: 28 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: ACOME Contact, fiber optic universal cable -Type: 4x50/125 OM2 N6997 -Application area: indoor and outdoor -Length: 153 m -Price: complete -Dimensions roll: Ø 710 x 410 mm -Weight: 16 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Omega, 4 pieces of tires type WIDE-WALL with tube and rim -Tire size: 23x9-10 NHS -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimension: Ø 540 x 240 mm -Weight: 35 kg/piece

directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, control unit, control valve, directional spool valve -Manufacturer:Omal , control block -Angle seat valve: Type NA -Shut-off valve: Type VIP -Individual components: see photos -Price/Delivery: complete -Dimensions total: 250/140/H125 mm -Weight: 1.7 kg

General SKU283X377 MakeOmve LocationBarneveld CEcheck TypeCIP3100 Main Features MaterialStainless steel Volume200 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity2x 100 l. Vessel sizes2x ø 600x600 mm With covercheck Dished bottomcheck OutletDN40 With jacketcheck MaterialStainless steel 1.4306 (304L) With jacketcheck General No.180330-1 Year of construction2019 Mounted on legson skid with wheels With switchgear(as is) Floorspace2,00x1,20 m Total height1,70 m Weight603 kg Extra SpecificationsWith 2 jacketed vessels, volume: 100 L each. Bedu pump, type MXVL 25-208G, 1.5 kW, 400 V Packo centrifugal pump, type CRP2/32-132/152 AKO pinch valve Heating units Ball cleaning system Mettler-Toledo weighing unit, type M300 (water) Touchscreen control (as is): no key: no control cabinet &:nbsp:Oils & fatPaints & coatingsGeneric medicinesOintmentsF ...

Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Omron, Power Supply -Type: S8VK-C12024 -Input: 100-240V 50/60Hz 2.6A -Output: 24V 5A -Quantity: 1 module available -Dimensions: 120/40/H130 mm -Weight: 0.6 kg

This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine.

Key data: 2790 KG, 3100 mm, 3750 mm

Hello, We hereby offer you a used pallet racking system (multi-station system) from Galler, type OMEGA. Manufacturer Galler Lager- u. Regaltechnik GmbH Type Omega Year of construction unknown Stand load max. 10,800 kg Load capacity/compartment max. 2,790 kg Stand height 3,750 mm Column depth 1000 mm Beam length (truss length) 3,100 and 3,400 mm Scope of delivery: 44 pieces stand 3,750 x 1,000 x 100 mm (H x D x W) 215 trusses 3,100 mm 14 trusses 3,400 mm 14 pieces of upright collision protection elements, long 985 x 120 x 55 mm (L x W x H) 10 pieces of upright collision protection elements, short 500 x 120 x 50 mm (L x W x H) 12 pieces ground bumper corner, green, 500 x 120 mm 13 pieces of ground bumper corner, yellow, 450 x 110 mm 1 piece ground bumper corner, yellow, 450 x 180 mm 2 pieces of uprights for double rows, plate 300 x 250 mm, stand height 350 mm 24 Piece ...

This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine.

OMEGON Freesbank LxWxH = +/- 1500x 1500 x 2350 mm Table = 1150 x 260 mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

General SKU014Y168 MakeCarbo-Fill LocationBarneveld CEcheck TypeCF97-SF Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler Fillercheck Number of filling heads:1 MaterialStainless steel General No.960068 Year of construction1997 With switchgear(as is) Floorspace1,1x0,8 M Total height2,1 MOils & fatPaints & coatingsGeneric medicinesLiquid fillersBiotechnologyFeed additivesSolventsDiscountCosmeticsLubricants & oleoDairyBeveragesBiopharmaceuticalAPIOmve NetherlandIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicinesPackaging machines > Liquid fillersIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > SolventsDiscountIndustries > Chemical > CosmeticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > ...

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L8000 Year of Make: 2005 CNC Control: Global Control Plus Track width: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L weld seam preparations (chamfers) 1 x Skew Rotator with Power Source Kjellberg FineFocus 800 3 x oxy-fuel burner ALFA 1 x FineMarker marking unit Without table, filter and running track

Key data: 360 KW, 450 kVA, 380 V

Brand Mercedes Benz - Stamford Model: 450 KvA diesel generator Year of Make: 1988 Serial Number: On request Operating hours (read) Unknown Capacity (KvA) 450 Capacity (Kw) 360 Engine brand Mercedes Benz Engine model OM444A Fuel Diesel Alternator brand Stamford Alternator model HC534C Voltage 220 - 380 Frequency (Hz) 50 1500 rpm Amperes (A) 684 Dimensions LxWxH (mm) 3200 x 1340 x 1800 Weight (Kg) approx. 3500 Quantity in stock 1 Made in Germany Comments Really good optic condition, running hours unknown, twin turbo

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

OMGA Radial RN 450 Radial Saw Cutting width 90° max 450mm Cutting height max 80mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.21kw main motor Saw size 300mm Power supply 220V

Turned grinding machine OMA COSBO 120 Working length 1200mm Two grinding units Oscillating Polishing Brushes Work after the copier

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

Omac B440 Lobe pump Stainless, durable and efficient lobe pump, complete with 3Ph Seipee motor, 1475Rpm, 15Kw motor, on stainless skid, 120mm inlet and outlet, on mobile stainless skid

This 5-axis OMAG Blade G gantry milling machine was manufactured in 2004. It features a substantial X-axis travel of 3,800 mm, Y-axis travel of 2,800 mm, and Z-axis travel of 1,200 mm. The machine is equipped with a powerful 25 kW spindle motor and a maximum saw blade diameter of 1,000 mm. If you are looking to get high-quality milling capabilities, consider the OMAG Blade G machine we have for sale. Contact us for further details.

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

General SKU251Y211 LocationBarneveld CEcheck Pressure Working pressure700 Bar Main Features Capacity60 Ltr./Hr. Motor5.5 KW Pressure700 Bar Specified Features - Piston homogeniser Piston homogenisercheck Capacity18 - 60 l/h Single stagecheck Number of pistons:2 Piston diameter12,7 mm Piston stroke40 mm Piston stroke volume5 ml InletDia. 22 mm OutletDia. 25 mm Motor5,5 kW (400V, (Ex)) With frequence controllercheck Speedmax. 160 rpm With pumptapflo type: TXR20 TTT (Ex) MaterialStainless steel 1.4306 (304L), super duplex SAF2507 1.4410 General MakeNetzsch Serial2801013-10/14673 TypeOmega 60 Year of construction2019 With switchgear(as is) Floorspace1,0 x 1,15 m Total height1,3 m Weight600 kg ATEX designedcheck Extra Specificationsincluding temperature control unit, size 0,5x0,8x1,1 mbrand: National LabTyp: FCP30.02-NEAserialnr:0214930/2002cooling capacity ...

OMET iFlex370, Year 2023, 8 Color, Web width: 370 mm, Printing width: 365 mm, Max.Speed: 190 m/min, Unwinder Ø: 1000 mm, Rewinder Ø: 760 mm, Print repeat: 5,5-18, Die-Cutting Repeat: 8-24, i Light - Pre-Register adjustment, i Vision - Register adjustment and Control, i-Drive, ECDC - Easy-Change Die-cutting, Rock`nRoll Dual Function, Easy-Strip system, Flexo UV, Flexo UV Led, Flexo water-based, Rotary Screen Printing, Cold foil and laminating, Hot foil, Embossing, Varnishing

OMET iFlex370, Year 2020, Web width: 370 mm, Printing width: 365 mm, Max.Speed: 190 m/min, Unwinder Ø: 1000 mm, Rewinder Ø: 760 mm, Print repeat: 5,5-18, Die-Cutting Repeat: 8-24, i Light - Pre-Register adjustment, i Vision - Register adjustment and Control, i-Drive, ECDC - Easy-Change Die-cutting, Rock`nRoll Dual Function, Easy-Strip system, Flexo UV, Flexo UV Led, Flexo water-based, Rotary Screen Printing, Cold foil and laminating, Hot foil, Embossing, Varnishing

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Used impact mill made by Alpine, type: OMNT200. New: 1962.

PKO diameter range 3-8,5mm number of dies 2 number of stations (incl. cut off) 4 cutting length 60 mm shaft length under head 55 mm output - pieces/min 250

This 3-axis OMAL Insert 1300 was manufactured in 2007. It features a working length of 1,300 mm, a horizontal drilling spindle, and an integrated glue and dowel insertion system. The machine is equipped with a ball screw on the X-axis allowing speeds up to 50 m/min and a PC-based CNC control system. If you are looking to get high-quality woodworking capabilities, consider the OMAL Insert 1300 machine we have for sale. Contact us for more information.

bushing cut-off , PKO diameter range 8,5 mm number of dies 2 number of stations (incl. cut off) 3 cutting length 100 mm shaft length under head 80 mm output - pieces/min 300 press power 30 t

Complete fully automatic concrete block production plant MASA / OMAG built in 96 / 2009 including mixing plant. More information, machine installation, pictures, layout on request.

Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and acce ...

Year of Make: 1992 Line 1 (PS, PP) Extruder screw diameter: 120/90/45mm Maximum gross plant output: 500 kg/h Film thickness range: 0.20–2.00 mm Maximum winding speed, 76 mm core 40 m/min. Maximum winding speed, 152 mm core 40 m/min. Maximum winding speed, 200 mm core 40 m/min. Available film structures: C/AAB, C/BAB, C/BAA Legend: A – Main extruder B – Co-Extruder C – Co-extruder (gloss layer) Additional function: The system is capable of winding two film webs at the same time.

Used MESAL filling triblock - 18000 BPMTechnical Specifications & Performance DataThis MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation.Manufacturer: MESALModel: E50-60-15GA1Year: 2013Production speed: up to 18,000 bottles/hourConfiguration: Rinser/Filler/Capper tri-blockFiller valves: 60Rinser grippers: 50Capper heads: 15Container type: PETBase format: 0.38L (380 ml)Neck finish:  ...

Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Contro ...

Used OMB labelling machine 4 heads 3000 BPHTechnical Specifications & Performance DataThe OMB ET 3000 R is a compact rotary labeling machine engineered for precise self-adhesive label application in beverage production and industrial packaging environments. Manufactured in 2016, this second hand unit combines an electronic cam architecture with motorized head height control to deliver consistent, repeatable labeling performance. It is supplied with one complete format set for 0.75L Bordeaux glass bottles and reaches speeds up to 3,000 bottles per hour, making it a strong fit for quality-focused wineries and specialty beverage producers seeking dependable throughput in a used bottling line.Manufacturer: OMBModel: ET 3000 RYear: 2016Production speed: up to 3,000 bphConfiguration: 4-position rotary carousel with electronic camLabeling technology: 2 self-adhesive (PSL) stationsIncluded forma ...

Used Futura top labeling machine 15000 BPHTechnical Specifications & Performance DataThis P.E. Labellers FUTURA TOP carousel labeling machine is configured for mixed cold glue and hot melt operations, ideal for high-quality label application within a used bottling line or as a standalone unit in industrial packaging environments. Engineered for reliable beverage production, it offers robust performance with precise control and flexible container handling.Manufacturer: P.E. LabellersModel: FUTURA TOP 20T/1420/4SProduction speed: up to 15,000 bphCarousel configuration: 20 plates (Counterclockwise rotation)Labeling stations: 4 total (3 cold glue, 1 hot glue)Seal capability: 1 dedicated station for tax stamp/seal with cold glueMax lift (bottle height adjustment): 338 mmBottle formats: Compatible with 0.5L, 1.0L, 0.75L, 1.5LContainer types: PET and GlassBottle dimensions handled: PET 0.5L Ø7 ...