lubrication unit used for sale

Thread cutting unit Suhner Tapmaster, serial no.: 616466-00201 Auction-ID: A1-45977-227

Snow chains for tractor unit MAN, TGX 1x in use Auction-ID: A1-45889-2857

Built-in control unit Type: BUS6-VC-EC-0016 Art. Item No.: 232691 Auction-ID: A1-45977-37

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12 Auction-ID: A1-45977-228

Dimensions: 197x100x30cm, content consisting of various press nipples Auction-ID: A1-45411-110

Factory No.: D 200739 Rated voltage 230V 50 Hz Total cooling capacity 1490 W Temperature range 20 - 55° C Year of construction 12/072012 Weight 30 kg Auction-ID: A1-45977-26

Transport width: 1050mm Length: 3x 1600mm Roll diameter: 90mm Chain drive via worm gear motor Auction-ID: A7-45983-58

liter capacity:21 l/min Pressure of coolant:50 bar rated current:20 A Clean water tank capacity:300 l total power requirement:16 kW weight of the machine ca.:200 Kg dimensions of the machine ca.:1,2 x 0,8 x 1,4 m We are importers for FRASCARA high pressure coolant systems Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spin ...

total power requirement:413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30

1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

travel -x axis:800/1825 mm travel -y axis:800/460 mm travel -z axis:600 mm Feeding X,Y,Z up to:0 - 40/40/40 mm/min. swival range +/-:+10 bis -90 x 360 Grad Rotary-table:800 x 630 mm number of T-slots:5 T-slot - distance:125 mm T-Slots:18 mm center hole:30H7X15 mm swival range +/-:90 Grad turning speed:20 m/min. Number of axles:3-7 St. Spindle RPM:12.000 1/min max. tool weight:10 kg max. tool length:330 mm diameter of tools max.:80 mm tool changing time:4 sec CNC control with 15.1" color flat-screen 19" machine control panel PCU 50 with Intel Pentium II Windows XP 10.0 GB hard drive

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (