lubrication unit used for sale

Control Unit, Control Electronics, Numerical Control WMW, NILES TDR 700-112 ( TDR700-112 ) Input: 260 V 3AC 41 A 49 - 62 Hz Output: 275 V DC 50 A used, tested ! Dimensions: 280 x 250 x 160 mm

Control Unit, Control Electronics OFD Feinmess Dresden MS1 - Control Unit ( MS1 Control Unit ) SG 101 V17 ( SG101V17 ) 110 - 240 V 50 - 60 Hz 50 VA New !' Dimensions: 430 x 280 x 140 mm

Solar Measurement Unit, Solar Measurement Unit SCHULZ SYSTEMTECHNIK SMU200//2 220 to 240 V suitable components: EL407, S482, EL872, EL874, EL875, EL876, EL877 used ! Dimensions: 480 x 560 x 260 mm

Drive unit, three-phase electric motor VEM, ELMO motor: Type 1255.3/3 0.04 kW 2800 rpm 220 / 380 V 50 / 60 Hz IP 44 The drive unit is designed to operate on 220 V single-phase AC !' shaft diameter: Ø 7 mm approx. 1.0 m Connection cable New, Aluminum housing ! Dimensions: 250 x 140 x 175 mm

Valve Daisy Chain Unit ORSTA EV 10 - 08 / 1 TGL 26263 / 20 Pressure Rating: 32 MPa Current Limiting Valve SB 10 - 21. 01 / 0 TGL 26245 / 20 Dimensions: 160 x 90 x 65 mm

Valve Unit, Directional Control Valve ORSTA 06-088.11-0 TGL 26223/60 Valve Chaining System TGL 26215/30 Pressure Switch D5 CO 2 TGL 10952 pressure inder valve 06-20.06-20 02 TGL 26234 control magnet G45 H TGL 32094 Dimensions: 340 x 210 x 60 mm

Valve interlinking unit with key ORSTA 10 - 05 TGL 26265 / 20 Nominal pressure: 32 MPa current limiting valve 10 - 02.11 TGL 26244 / 20 New !' Dimensions: 170 x 110 x 55 mm

Maintenance Unit, Pressure Regulator NORGREN OLYMPIAN PLUS C64S-DK1064 B64G-NNK-MD3-RMN T64T-4GB-P1N P: 0.4 - 10 bar Pmax.: 17 bar Explosion-proof ! Dimensions: 300 x 250 x 120 mm

Maintenance unit, three-piece MARTONAIR, NORGREN M8B-A68-B39D R15-000-RNL0 F15-000-M3H0 L15-000-0P90 G 1 1/4 0.4 - 8 bar New !' Dimensions: 450 x 280 x 145 mm

Maintenance unit, maintenance device combination FESTO LFR-D-DI-MAXI LFR-1/2-D-DI-MAXI-KF 192445 G 1/2 12 bar used, tested ! Dimensions: 360 x 290 x 125 mm

Maintenance unit with pressure switch REXROTH 3 x 0 821 100 023 2 x 0 821 300 306 1 x 0 821 302 515 4 x 0 821 300 920 1 x 0 821 300 264 0,0,0 5 - 16 bar used, Accessories for AGIE CUT 300 ! Dimensions: 340 x 250 x 100 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0412 Nominal pressure: 1 MPa (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.0 1 TGL 20705 ED 100 24 V DC used, tested ! Dimensions: 230 x 130 x 180 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0410 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.1 TGL 20705 ED 100 220 V AC used, tested ! Dimensions: 230 x 130 x 170 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St GK 04/0400 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm hand levervenil ORSTA 6-0.1 TGL 20705 used, tested !' Dimensions: 240 x 130 x 240 mm

Circulation pump, centrifugal pump, water pump, chemical pump KSB ETALINE GN40-160/902 Ausf. GN6, CD4090 with control unit VarioDrive Type:30FV1 DN60 380 V very good condition Dimensions: 680 x 310 x 470 mm

Control cabinet cooling unit, control cabinet cooling unit TRAUB 380 V 3 AC spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 490 x 320 x 1320 mm

Evaluation unit PEPPERL+FUCHS Ident - M MVI-F57-2HB12 108068 Dimensions: 340 x 260 x 190 mm

Flow meter with display unit ACS, ENDRESS+HAUSER PROMAG 33A 33AT04-FD1BA41A22A DN04 1.4404 PN40 IP67 flange Ø 95 mm The two devices are not wired together ! S364 and EL249 combined ! Dimensions: 330 x 260 x 240 mm

Control cabinet cooling unit, control cabinet cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm

Refrigeration unit THERMOTEK Type: P705-14974-1-U Cooling capacity: 400W max 18.5 bar Pump: 5 l/min 3 bar 0.5 kW 230 V New ! Dimensions: 580 x 420 x 240 mm

Control cabinet cooling unit, control cabinet cooling unit PFANNENBERG DTS 73.. (1500 watts) 220 V Dimensions: 390 x 220 x 1350 mm

Used envelope film machine, cellophone machine by WEGA type Fk-6 . Technical parameters of the machine: - Overall dimensions (L x W x H): 1050 x 670 x 980 mm; - Weight: approx. 180 kg; - Power supply: 1220V, 50-60Hz, 10000W; - Pneumatic supply 0.4-0.6 MP, 20 l/min; - Operating temperature: 15÷40oC. The semi-automatic foiling machine type FK-6 is designed for foiling rectangular boxes with flat and rigid surfaces using the enveloping method. Maximum output: 400 - 600 boxes/hour Maximum box dimensions: 70 x 200 x 230 mm Minimum box sizes: 7 x 60 x 50 mm Film parameters: - polypropylene coextruded film, heat-sealable on both sides, bi-directionally oriented; - thickness: 20-35 µm; - maximum width: 300 mm - minimum width: 70 mm - maximum diameter of film roll: 300 mm; - inner diameter of thimble: 76 ± 5 mm; - recommended film type: 25MB 400 Mobil Pl ...

Control cabinet cooling unit, control cabinet cooling unit MCLEAN MIDWEST SLIMBOY 28-0626-G005 Useful cooling capacity: 1582 / 1758 W 230 V 60 Hz used, tested ! Dimensions: 990 x 250 x 730 mm

GRASO PK030 shrink wrapping machine with GRASO TGW 30/80 heat shrink tunnel was manufactured in Poland in 2014 by Graso. The device, due to its versatility and advanced technology, optimises the process of packaging various types of products in unit packs as well as collective packages. Packaging made of heat shrink film effectively protects products from external factors, while enhancing their aesthetic qualities at the same time. The GRASO PK 030 packing machine has a large working area and a knurled bar, which guarantees excellent sealing quality. After sealing, a roller conveyor transports the product to the heating tunnel, where the film shrinking process takes place. After exiting the heating chamber, the finished pack is cooled by fans. The GRASO TGW heat shrink tunnel, in turn, is equipped with a control box, heaters with heat sinks and adjustable airflow by means of adjustabl ...

Load cell with connection unit, force transducer, load cell PROMESS 20002 10900/4 measuring range: 1 kN cable length approx. 0.6 m used, tested ! Dimension(Sensor): 40 x 40 x 32 mm Dimension(Connection Unit): 160 x 95 x 42 mm

Dividing head DECKEL Center height 90 mm Spindle Passage in Pull Tube 25 mm Gear ratio 40 : 1 Weight approx. 41 kg

Housing Unit, Three-Hole Flange Bearing Housing Unit, Flange Bearing INA PCFTRY 35, PCFTR35 2pcs ! housing: CFTR07 insert bearing: GAY 35-NPP-B Shaft diameter: Ø 35 mm Dimensions (single bearing): 145 x 128 x 45 mm New !' Dimensions (Packing): 145 x 130 x 90 mm

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing NTN UCF216D1 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New !' Dimensions (package): 145 x 130 x 90 mm

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing PAGUS UCF216 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New ! Dimensions (packaging): 145 x 130 x 90 mm

Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 30 10pcs ! housing: 01CJT08 insert bearing: GYE 30 KLLB-C FA115 shaft diameter: Ø 30 mm Dimensions (single bearing): 142 x 80 x 42 mm New ! Dimensions (Packing): 400 x 150 x 90 mm

impressions: 44 Mio. max. printing speed sheets: 8000 /h max. paper size: 32x46 cm numbering unit: include The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing EBS UCFL 207 8 pieces ! housing: FL 207 insert bearing: UC 207 shaft diameter: Ø 35 mm Dimensions (single bearing): 160 x 90 x 65 mm New !' Dimensions (Packing): 300 x 180 x 160 mm

(processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: PJ000016 // Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, exte ...

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 45 2 pieces ! housing: CJTR09 insert bearing: GLE 45 KRRB FA115 Shaft diameter: Ø 45 mm Dimensions (single bearing): 180 x 110 x 50 mm New ! Dimensions (Packing): 180 x 110 x 100 mm

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

-Fully hermethic motor compressor -digital thermostat Cooling Capacity: 4.3kW Voltage: 3x400V/50Hz Pump power: 0.25kW Water tank: 15l

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Oiler can be filled under pressure P3KLA14LSMN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

Capacity (max.): 600 pieces/h Connected loads: 220/240 V, 50/60 Hz, 17.5 A Machine dimensions (LxWxH):1520 x 790 x 1090 mm Machine weight: 160 kg Rated power: 3,700 W Rated current: 17.5 A Min. product weight : 0,05 kg Max. product weight: 15 kg Max. film width: 600 mm Max. film roll diameter: 300 mm Film roll core diameter: 77 mm Film thickness: 10-50 μm Availability: immediately Condition: well-maintained, in working order

Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,

For sale is a used Nordson Problue 10 hot melt machine

Key data: 120 mm, 1 kW

Extraction System Extraction FIELDS TYPE: AF10 Connection diameter approx. 120 mm Motor power: 1.1 KW mobile. The machine works. Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. all information without warranty. Subject to prior sale. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.

Danfoss Optyma™ PLUS condensing unit Type: OP-LPHC271NTP00E 114x3480 Compressor type: NTZ271A4LR1B Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C Dimensions: 1600 x 540 x 1800 mm Weight: 325 kg Number of fans: 2 x 600 mm Stock: 1 piece Stock number: AG 178 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Cool condensing unit Model: M5P CSGLE ZF 40-SB-P Compressor type: ZF40K4E-TWD-551 Cooling capacity for R404A: 22.1 kW at -10°C/40°C, 11.9 kW at -25°C/40°C, 9.5 kW at -30°C/40°C External dimensions: 1460 x 850 x 1410 mm Number of fans: 2 x 500 mm Stock: 1 piece Stock number: AG 177 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Key data: 100 °C

Tool temperature control unit - HB-Therm HB-100Z1 Years of manufacture: 2013 and 2014 Description: Max. heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended Price: On request

For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)