lubrication unit used for sale

Hydraulic power unit, micro power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) engine: 1.1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

Evaluation Unit PERPERL+FUCHS DENT-M MVI-D2-2HRX Part No. 33770 24 V DC see also EL2739 ! used, tested !' Dimensions: 140 x 100 x 80 mm

Lumiflex ULZS-4/1 Accident Protection Device Control Unit

Untested, a pallet and a lattice box as loading aids

Hydraulic power unit with radiator BOSCH 0 813 260 213 ( 0813260213 ) 2 819 042 654 ( 2819042654 ) Q : 23 / 15 l/min p: 75 bar (1088 psi) tank capacity: approx. 100 L motor: 3 kW 400 V 3AC Cooler: 0.37 kW 220 - 240 / 380 - 420 V 3AC used, tested ! Dimensions: 1250 x 7800 x 1670 mm

Evaluation unit BALLUFF BIS S-6022-019-050-03-ST10 ( BISS-6022-019-050-03-ST10 ) series BIS S used ! Dimensions: 190 x 120 x 60 mm

2015, machines have been put away working and have had annual inspections

Hydraulic power unit with gate gate pump ORSTA pump: 16/16-1 TGL 10885 p: 16 Mpa (160 bar) V: 16 cm3/U motor: 1,1,00 5 kW 940 rpm 220 / 380 V tank: 75 l as a spare part for Hohenstein RBT400 !' used, tested ! Dimensions: 920 x 430 x 780 mm

Electronic Module, Interface Unit GE FANUC FIELD CONTROL GENIUS BUS INTERFACE UNIT IC670GBI002G 09847 New ! Dimensions: 130 x 115 x 105 mm

Hydraulic power unit with tank REXROTH pump: PV2V3-30/12R1MC-100A1 p max: 100 bar (pump) Qmax: 8,50 bar 5 cm3/U Tank 60 L Motor: 1.5 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 600 x 520 x 810 mm

Control Unit, Control Electronics, Numerical Control WMW, VEM VEB NUMERIK CNC - H 645 ( CNC-H645 ) 19623212 4518784 220 V 48 - 62 Hz used ! Dimensions: 550 x 320 x 630 mm

Hydraulic power unit HOERBIGER FLUIDTECHNIK Working pressure: 50 bar Magnetic voltage: 24 V Pump flow rate: 8 l/min Tank volume: 25 liters Motor: 0.75 kW Motor voltage: 220/ 380 V/ 50 Hz used, tested ! Dimensions: 400 x 360 x 100 mm

Return filter unit, surface-mounted return filter HYDAC RFDBN/HC161G10D1.1 VR2 - D.0L24 25 bar switchable, with 2 pressure switches ! Dimensions: 335 x 320 x 220 mm

Attached to Europe pallet

Hydraulic Power Unit With Air Operated Hydraulic Pump GRACO FIRE-BALL pump: L83 6203876 Air motor: B84 6203963 Ratio: 5:1 drive pressure: max. 12 bar Q: 10 l / min tank: approx. 10 l used, tested ! Dimensions: 260 x 250 x 650 mm

Valve Daisy Chain Unit ORSTA 10 - 02.01 TGL 26244 / 20 Current Limiting Valve Dimensions: 170 x 110 x 55 mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

Hydraulic power unit WEHRDOHLER PUMPENFABRIK FMA 1/12 ( FMA1/12 ) P: 40 bar Q: 3.2 l / min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 590 x 550 x 500 mm

Hydraulic power unit with tank LINCON KV 18-102-141/0.12 ( KV18-102-141/0.12 ) 8 bar 1 l/min motor: 0.12 kW 220 / 380 V used, tested ! Dimensions: 380 x 300 x 400 mm

CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Mono With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type MONO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

Hydraulic Power Unit with Gate Gate Pump ORSTA pump1: 10/16-1 TGL 10889 pump2: C2,5-2 L TGL 10885 motor: 1.5 kW 935 rpm 220 / 380 V Tank: 80 l used, tested ! Dimensions: 920 x 520 x 1350 mm

Directional Control Valve Unit, Directional Control Valve Assembly HAWE BWN1A-5-Z3/50 2105 New ! Dimensions: 200 x 150 x 110 mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Hydraulic power unit with two pumps HPE Q1 = 48 l/min p1 max = 90 bar P1 = 7,,P1 5 KW Q2 = 23 l/min p2 max = 80 bar P2 = 4 KW 400 V 200 l Tank used, tested ! Dimensions: 1700 x 1200 x 1650 mm

Maintenance unit, three-piece PPT PNEUMATICS, PRVA PETOLETKA WA1-101 M NW 10 229-28200 0 - 10 bar New ! Dimensions: 270 x 220 x 155 mm

Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

Hydraulic Power Unit FLUTEC PTOK-250 / 1.1 / M / R ( PTOK-250/1.1/M/R ) max: 100 bar max: 28 l/min with 100 liter tank pump with cooling 220 / 380 V motor: 3 kW IP54 used, tested ! Dimensions: 820 x 500 x 830 mm

Maintenance unit, three-part PPT PNEUMATICS, PRVA PETOLETKA WA1.101.Z 229-28200 0 - 10 bar New ! Dimensions: 270 x 220 x 125 mm

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

Hydraulic power unit with radiator and tank REXROTH engine: 5.5 kW 400 V radiator Hydac OKA-R2 S/1.2/8/M engine:0.37 kW Tank: 115 l used ! Dimensions: 1100 x 1000 x 600 mm

Pneumatic unit FESTO PEV-1/4-B-0D 175250 HEL-D-MIDI 165080 FRM-H-D-MIDI 170688 Dimensions: 180 x 140 x 55 mm

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Hydraulic power unit with filter and tank REXROTH / FMB BLICKLE 120 bar 9 L/min tank 100 L pump pump BUCHER QX22-006R119 Pd 125 bar Vg 006 cm3/U engine: 2,2,000 2 kW 1410 rpm 380 V used, tested ! Dimensions: 1000 x 900 x 1500 mm

Maintenance unit, three-piece PPT PNEUMATICS, PRVA PETOLETKA WA1 061 M NW 6 229-28100 0 - 10 bar New ! Dimensions: 270 x 220 x 155 mm

Hydraulic power unit with tank REXROTH pump 1: PV7-17/25-45RE01MC3-08 R900538525 p max: 80 bar ( pump ) pump 2: PV7-16/10-14RE01MC3-16 R900598753 system pressure pressure : max. 70 bar tank: 250 l engine: SIEMENS 1LA7163-4AA91-Z 11 kW 1460 rpm 400 / 690 V 3AC 50 Hz IP55 used, tested ! Dimensions: 1220 x 1000 x 1920 mm

Hydraulic power unit with radiator BOSCH p: 75 bar Q: 23 / 15 l/min tank capacity: approx. 100 L motor: 3 kW 400 V Radiator: 0.37 kW used, tested ! Dimensions: 1230 x 600 x 1660 mm

Maintenance unit, three-piece LANDEFELD 1/2 Block CL 123 7107289 0.5 - 10 bar New ! Dimensions: 265 x 210 x 80 mm

Hydraulic power unit with tank PAGUS pump: ORSTA, SACHSENHYDRAULIK GmbH PE15-55/16.0-RH3L Operating pressure: max. 16.0 MPa ( 160 bar ) ( Pump ) Displacement volume: 55 cm3 / U (pump) Rated speed: 1500 rpm Motor: VEM K11R 132 M4 ( K11R 132 M4 ) 7,7 5 kW 1440 rpm 400 / 690 V 3AC 50 Hz IP55 Tank: approx. 350 l used, tested ! Dimensions: 1510 x 800 x 1200 mm

Hydraulic power unit with tank BOSCH 0/813 / 246 / 493 ( 0/813/246/493 ) SHO 2877 50593 0 / 160 bar 6 / 16 l/min engine: 3 kW 400 / 690 V Tank: 50 l used, tested ! Dimensions: 800 x 390 x 800 mm

Maintenance unit LANDEFELD COMPRESSED AIR CL 14-6 MULTIFIX 0.2 - 6 bar G 1/4 New ! Dimensions: 275 x 100 x 60 mm

Hydraulic power unit with tank, universal power unit ORSTA 10/6. 3 - 63.0/01 TGL 10897 63 bar 10 l/min engine: 1.5 kW 220 / 380 V Tank: 80 l used, tested ! Dimensions: 1180 x 640 x 1310 mm

Maintenance unit with pneumatic switch WMW, EAW Type: 3 1026/19 switch st H2 NW 6 0 - 1 MPa New ! Dimensions: 380 x 240 x 150 mm

Frequency Control Device, Synchronous Relay, Frequency Controller MSR ELEKTRONIK SYNF-2 230 / 400 V 3 VA 50 Hz Relay Output(AC): 250 V 250 W Relay Output(DC): 30 V 30 W used !10 V Dimensions: 100 x 75 x 110 mm

Maintenance unit with soft start valve SMC EAW300-F02 EAV300-F03-5Y0 EAL300-F02 0.5 - 8.5 bar 24 V DC used ! Dimensions: 420 x 210 x 105 mm