129,267 used machines on RESALE, but how to find them? Machine Search
A total of 8 pieces available, price per table Pros: - Due to the narrow design of the base, good accessibility of the elements from all sides - Large adjustment range of the contact surface by extending the diamond-shaped pads - Tools and small parts always ready to hand on the shelf on the assembly tables - Support rails optionally covered with rubber, brushes, sliding strips or felt - No cable clutter when using the implement carriers: the machines are always ready to hand at the place of use Equipment: - Work surface covered with profile rubber - Diamond shaped supports in the edge area for placing profiles in the longitudinal direction - Height adjustable 900 – 1,100 mm
Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
Refrigeration unit FRASCOL LB2-Q736-0Y-2T with condenser USAC16E and compressor Q7-36.1Y1000. FRASCOL Q7-36.1Y1000 Compressor Power: 7 hp Flow rate: 35.86 m³/h with 2 pcs fan HIDRIA R11R-4525A-4T-5747 Power: 315W and 1420 rpm Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!
Hot melt machine 3~, 3LNPE, 20A, 5.8 kW, 400V, 50/60Hz very little used / replacement device Complete with: 2 application heads 2 heating hoses length: 120 cm W08T200 Encoder Balluff BDG 6110-2-10-30-Z061-1200-65 Product Recognition Photocell Manual approx. 15 kg hot glue
Make: BITZER Compressor BITZER 4J-13.2Y Power: 13 hp Flow rate: 63.5 m³/h Condenser EKO with 4 pcs fan for positive and negative cooling Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.
hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg
Attached to Europe pallet Auction-ID: A1-41275-196
Falzniederdruckpresse / Joint Nipping Press Gantenbein ROLONG RE SN. 1060 Serial-No. 1060 hydraulische Press / hydraulic press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometer Auf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Falzwerk 2. Station Eigensteuerung / Folding Unit 2. Station SelfControl MBO T79-2-81/4 Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
SINGLE LOT – SALE OF BUSINESS UNIT CAREFULLY CONSULT THE NOTICE OF SALE - INSPECTION IS RECOMMENDED The subject of the sale is a business unit as a whole, consisting of an organic set of capital goods suitable for the exercise of the activity. The compendium includes machinery, equipment, movable capital goods and all the additional assets described in the appraisal report drawn up on 17/03/2026 and attached, as well as the lease contract relating to the property in which the activity is carried out. Hardware, small parts and all goods not expressly indicated in the appraisal are excluded from the sale. The transfer takes place en bloc, as a whole and not as a measure, in the state of fact and law in which the goods are located, according to the \"seen and liked\" formula, without any guarantee from the transferor company regarding defects, discrepancies, quality, compliance wi ...
Eindruckwerk mit Nummeriereinrichtung / Imprinting Unit Numbering Heidelberg GTO52 Year 1997 - SN. 790490 Eindruckwerk / Imprinting Unit Nummerierwelle mit 2 Sitzringen / Numbering shaft with 2 mounting rings 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
3. Falzstation - Eigensteuerung - 3. Folding unit - SelfControl MBO T92/444 - 56/4 Year 1986 - Serial-No. 20860601 Infeed width max. 560mm 4 buckles SELFControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
High-performance fan Zenner, type VTZ 710/63/1 Sonder, built in 2014, consisting of control cabinet, frequency converter, cell airlock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Sonder Year of Make: 2014 Volume: 4.72 m³/s Temperature mx.: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg Remark: The fan is intended for transporting paper/cardboard. In the process, the material is also chopped. The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the mac ...
Überleitstation / Transfer-Unit Müller Martini Überleitstation Müller Martini von der Zusammentragmaschine zum Klebebinder Von der ZTM MM Z1 / MM 201 zum Klebebinder Pony 246 - 3020 Transfer-Unit Müller Martini from Gatherer to Perfect Binder From the Gatherer MM Z1 / MM 201 to Perfect Binder Pony 246 - 3020 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515721 / 186781/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515722 / 188445/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Sell: Ventilation module GR35C-ZID.DC.CR Item number: 7515723 / 188443/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Sell: Ventilation module GR35C-ZID.DG.CR Item number: 7515724 / 188446/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DG.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Screw pump Aggregate Manufacturer : Allweiler Type: SNF80ER46U12.1-VV1 with motor Type: TM132M/4AT The unit is NEW and fully functional. see pictures for more details.
Lot can be loaded at the buyer. Auction-ID: A1-40133-264
Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg
EREMA flush filter with partial flush back. SW 4/134 RTF
Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.
Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.
maximum number of results exceeded
please refine your search
50 € 
