129,000 used machines on RESALE, but how to find them? Machine Search
W863 1 horizontal hydraulic bale press LTG, 1988 pressure about 20 t., feeding by 2 shutfeeders, bale dimension approx. 700 x 700 x 1200 mm, bale weight 80 - 120 kg
Jetzone furnace Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: SND 1.5 x 202 Year: 2016 Productivity: 450 kg / h Dimensions: 8136 x 3581 x 4376 Heating medium: natural gas Description: A high-speed dryer consisting of two main elements: a fitting equipped with heating and distribution elements, and a production conveyor.
16,830 litre RIEGER mash agitator tank with paddle agitator/agitator agitator, upright, V2A Properties: Volume 16830 L Manufacturer: RIEGER Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3002 mm Outer diameter 2700 mm Inner diameter 2500 mm Agitator Paddle Stirrer Vertical design Number of feet 4 on frame Last Use Food Year of construction 2016 Max. operating temperature 50 °C Max. density 1100 kg/m³ Tank topstock: Clapper bottom Crane eyelets Gearbox and engine Filling flange on the side Front dome with manhole with threaded nozzle DN50 Cylinder: Ladder hook at the top Manhole 440 x 340 mm oval Ladder hook under the manhole Paddle agitator Tank underbody: Cone base Clear drain with disc valve Window forward-drawn residual drain pipe with flange and ball valve 4 ...
Stainless steel IBC container, bulk container, capacity 750 liters Content: 750 Ltr. Operating pressure: pressureless Year built: unbek. Herst.: unbek. Material: Stainless steel 1.4301 Design: rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, Dome lid 400 mm with bayonic closure in stainless steel, drain disc valve DN 250 (250 mm) in Edelstah,l with hand lever, 1" threaded connection in the upper floor last use: food Height: approx. 1,450 mm Width/depth: approx. 1,180 mm / approx. 980 mm
16,830 litre RIEGER mash agitator tank with paddle agitator/agitator agitator, upright, V2A Properties: Volume 16830 L Manufacturer: RIEGER Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3002 mm Outer diameter 2700 mm Inner diameter 2500 mm Agitator Paddle Stirrer Vertical design Number of feet 4 on frame Last Use Food Year of construction 2016 Max. operating temperature 50 °C Max. density 1100 kg/m³ Tank topstock: Clapper bottom Crane eyelets Gearbox and engine Filling flange on the side Front dome with manhole with threaded nozzle DN50 Cylinder: Ladder hook at the top Manhole 440 x 340 mm oval Ladder hook under the manhole Paddle agitator Tank underbody: Cone base Clear drain with disc valve Window forward-drawn residual drain pipe with flange and ball valve 4 ...
Stainless steel silo container BSIF 550 Ltr. Content: 550 Ltr. Operating pressure: pressureless Year built: unknown Herst.: Shepherd Material: stainless steel 1.4301 container, frame iron painted Design: Rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, dome lid 400 mm, drain disc valve DN 150 in stainless steel, very well maintained condition, vent cap in the upper lid, stainless steel pipe DN 80 in funnel, funnel inclination 45° last use: granules Height: approx. 1,480 mm Width/depth: approx. 1,200 mm / approx. 800 mm
MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. DATE OF MFG:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.
MAKE:FUKUSHIMA LTD. TYPE:MA10B MAX WORKING PR.:30 MFG NO.:29801 DATE OF MFG:1979 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO
MAKE:FUKUSHIMA LTD. TYPE:MA10C MFG NO.:29807 Max. Working Pressure:30kg/cm2 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO
3000 x 1500mm Sheet 6500mm Tube length 3000w IPG FIBER
used
Temperature control unit Manufacturer: Lauda Type: LTH140P No.: X12217 Power: 7 kW Filling volume: 5 l Year of construction: 1999 with operating instructions
pressure: 100 t stroke: 300 mm Cylinder: 205 MM distance between table / ram: 520 mm table surface area: 1100X350 mm ram surface: 350X350 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brief Technical Description of Corrugated Cardboard Production Equipment The SWL 250-2200 three-layer corrugated cardboard production line is a modern piece of equipment designed for industrial-scale production of corrugated cardboard. The line is suitable for manufacturing packaging, boxes, pallets, and other corrugated cardboard products widely used in logistics, trade, and manufacturing industries. Thanks to its high productivity and process automation, this equipment is a reliable and efficient solution for enterprises aiming to optimize corrugated cardboard production and increase their market competitiveness. GENERAL LINE PARAMETERS: • Manufacturer – Shanghai Liu Xiang General Equipments Co. Ltd (China) • Year of manufacture / commissioning – 2010 / 2011 • Operating speed – 180–220 m/min • Maximum paper roll width – 2200 mm • Minimum paper roll width ...
current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock
Reference ID: PP-53377 Category: 6 Colors Manufacturer: Manroland Model: 906-6 LTTLV Year Built: 2004 Colors: 6 Impression:- Working Hours: - Speed:- Maximum Size: - Minimum Size: - Condition: Good Location: Europe Availability: Immediately Machine Description Configuration: 6 colors + 2 × varnish Console: RCI console for ink and axial/circumferential control of plate cylinders Multi CCI 2D (spectrophotometric control) Feeder: Pile alignment on feeder Pneumatic side lays Non-stop feeder with swords Sheet decurler Printing Units: Automatic roller wash-up device Automatic impression cylinder wash-up device with brush Roland-Deltamatic damping system TRANSFERTER: Ventury Air Transfer System APL: Automatic plate change Ink temperature control KLH type FS60 Preset automatic size adjustment on feeder and delivery, on pressure ...
Used molds, in good condition. Available ex stock
SPECIFICATIONS: 45° glass strip saw Machining area mm: 2,700 x 1,000
-fully hermethic engine compressor -digital thermostat Cooling capacity: 3kW Voltage: 230V/50Hz Pump power: 0.65kW / approx. 17l/min Water tank: 30l
The machine is in good technical condition, after prior agreement it is possible to test it. Max. turning diameter over the bed 450 mm Max. machining diameter 320 mm Max. machining length 500 mm Distance between centers approx. 640 mm X-axis travel 160 mm Z-axis travel 540 mm Spindle bore diameter 65 mm Spindle taper CM4 Max. spindle speed 4,000 rpm Main motor power approx. 15 kW Turret head 8–12 tools Tool clamping type VDI Control system FANUC 18T (most common) Tailstock Usually no Bar feeder No Machine dimensions (L × W × H) approx. 3,650 × 1,200 × 1,980 mm Weight approx. 4,800 kg Power supply 400 V / 50 Hz
USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000
We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
8500mm Bunker Loader 4500mm Discharge System Rofin DC025 2500w Year: 2006 Modification to Process upto Ø152.4mm Dust Extractor
Brand: Polyglass Type: Washing machine, Vertical Model: LT1500/LC Rood Chassis number: 1090-PL-05/01 Photos/film available: Photos available Remaining: Small machine
SPECIFICATIONS: Workbench for reading and cutting glazing beads Workbench dimensions: 3000 x 1250 mm Tilt of saw blades: 45° Pneumatic/electric operation
Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,
Frequency converter, frequency converter, drive converter, controller, variable speed drive -LTi REENERGY: Controller E230 G360/1,2 BWrg-CFpux -Power: 1.2 A -Input: 230 V AC 4.5 A -Output: 360 V DC 1.2 A -Price: per piece -Number: 3 pieces -Dimensions: 300/150/H110 mm -Weight: 3.7 kg/piece
Roof window roller shutters, blinds, roller shutter curtains, roller shutter motors, tubular motors -Tubular engine: Somfy -Motor: 20/17 LT50 20 Nm -Dimensions: 570/60/H60 mm -Net weight: 2.3 kg
Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 inch -Cooling unit output: 0.33 kW -Water volume flow: 500 l / h -Dimensions: 895/600 / H1020 mm -Weight: 156 kg
Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,
new
KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3
Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg
Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,
A large stainless steel pressure tank is sold. Specifications: Manufacturer: BAM Freising Capacity: 8.000 Ltr. Year of Make: 1961 Pressure: 5 bar Papers available Dimensions: LxD: 3,800x1,800mm
Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,
BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise, ...
container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 540 liters -Number: 12x containers available -Price: per piece -Dimensions: 1080/1000/H1110 mm -Weight: 105 kg/piece
container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 230 liters -Number: 2x containers available -Price: per piece -Dimensions: 750/700/H890 mm -Weight: 62 kg/piece
Agitator tank, agitator vessel, agitator tank, agitator vessel, silo system, transport silo, tank, fertilizer storage silo, melting vessel, melting tank -Stainless steel tank: with agitator -Contents: 750 liters -Individual components: see photos -Transport dimensions: Ø 890 x 1280 mm -Weight: 171 kg
Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M
Gear Motor with Brake ORIENTAL MOTOR 5GU12.5KB / 5RK90GU-CMF2 ( 5GU12.5KB /5RK90GU-CMF2 ) 1250 / 1500 rpm 200 V Dimensions 300 x 160 x 120 mm
I offer for sale an unused and completely original packaged industrial shelf SSI Schaefer LTR600. The shelf was originally ordered for a project, but never assembled. All components are in new condition and are completely present. Technical data • Model: SSI Schaefer LTR600, single-sided longitudinal vertical shelf • Overall length: 39.3 m • Height: 7.6–8.1 m • Depth: 800 mm • 14 fields, each with a clear field width of 2,700 mm • 7 levels per field • Per level: 4 depth pads type UN Scope of Delivery • Complete shelf line LTR600 • All stud frames (7.6–8.1 m, orig.) • All trusses (2.7 m) • All depth pads type UN • Small parts & fasteners • Original SSI Schaefer packaging Condition • New • Never set up • Original packaging • Complete Logistics / Pick-up • Location: Fellheim (Bavaria) • Longest components: 7.6 ...
maximum number of results exceeded
please refine your search
