low loader used for sale

1 pc. wheel loader tyres with rim The following information is available on the tyre: ALLIANCE 600/60-30.5, 12 P.R., NYLON, A8, FLOTATION 331 The tire is in good condition. Pick-up preferred, but on request a transport can also be arranged.

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

Type: VGL 5000. Dual-flow mixer in carbon steel design with 5.000 l. net capacity, cylindrical mixing container with conical bottom, with vertical center screw, divider arm and flow disc, rectangular connection for pocket filter, manhole, lower screw bearing with air flushing device, pneumatic flat valve at output.

Low pressure blower GMB 14.8, Y.O.M. 1994, with 11.8 m3/min. volume flow at delta-P = 360 mbar, P1 = 0.64 bar. Drive 44 kW / 1.485 UPM, with check valve, overpressure valve, tank, air filter, base and sound insulation hood.

Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

We have a shrink tunnel for cap sleeves. Produced by Secomac. Own frame to be placed over a conveyor, easy height adjustment. Few running hours and low price. Editec AB

21-32-131 Electric - hydraulic U-lifting table NH HTF-U New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg. Price: 1860 EUR Buy three or more – PRICE: 1695 EUR (EXW Jonava, Lithuania) Dear Customers, We invite you to visit our store Jonava. Currently used to present the largest exhibition of woodworking tools in the Baltic countries - your store have more than 300 installations. Our team is always ready to help you find the right equipment. JSC Medienos ...

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Chamber filter plates PP Polypropylene chamber filter plate -for almost all manufacturers: Rittershaus & Blecher, Passavant, Netzsch, Hoesch, von Roll, Diemme, Filox, Andritz, etc. Cake thicknesses and plate thicknesses are freely selectable depending on the application and filtration conditions. The chamber filter plate made of plastic is characterized by excellent chemical resistance and easy handling due to its low dead weight. - One component - The filter surface consists of a special conical bump structure. This pimpled structure supports the filter cloth and ensures excellent filtration performance for each individual chamber. - Filtratin inputs and filtrate sequences individually according to customer requirements - High plan parallelism, thus flawless sealing in the closed state. Standard formats: 250, 400, 470, 500, 630, 800, 915, 1000, 1067, 1200, 1300, ...

Grounding and short-connection device for low voltage from the company Dehn, built in 2005, not used and in the original Metal case packed

Engine in exchange Yanmar Type=3TNE88-ENKR from Kramer wheel loader with warranty immediately available from stock. all prices plus vat. info@miw-zeven.de

250 kW, max. 10.50 bar, 34.86 m3/min. oil-free. Low and high pressure elements are now Mk2 outing and have 13000 operating hours.

Cat.-Nr. 13-0176 in a very good condition material: V2A � AISI 304 (1.4301) � surface: outside and inside 2B=IIIC Manufacturer: com. Binder GmbH Upper bottom: - flat conical lid with with CIP-cleaning and connection DN 65 - manhole oval 435 mm x 310 mm with clamping bracket and screw plug - CIP-connector DN 50 - Ventilation connector 200 mm - 1 flanged connector DN 50 - 2 eye hooks Tank body: - thread connector on the side above DN 50 - thread connector on the side above DN 50, 40 cm depth - with overflow pipe inside DN 100 up to the top of the tank bottom - fill pipe installed inside to tank center DN 100 welded from top to bottom - ladder hook 500 mm Lower bottom: central conical bottom outlet pipe DN 50 on 4 stable trumpet feet with calotte height adjustable DxH: 1.720 x 3.700 mm weight: appr. 800 kg All prices are valid Ex-Works, excl.V ...

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Cat.-No. 13.0327 in a very good condition ground inside and outside grain 180 for an additional charge with agitator upper bottom: • thread connection DN 50 and DN 25 tank body: • 2 openings for agitator Ø 450 mm and 280 mm lower bottom: • on 4 adjustable feets Measurements and weight: Height x diameter: 3400 x 2300 mm Height tank body: 2000 mm Weight: approx. 2 t Operating instruction for control valve and drawing available. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 09-1025 new Standard Features: • Strong Frame Construction • Possible to use as Basis and Intermediate Storage • Movable with Low Lifting Elevating Truck Measurements and Weight: Total Height: 390 mm Width: 760 mm Length: 1250 mm Weight: 27 kg The price is for one barrel. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

Cat. No. 12-2070 in very good condition Material: V2A – AISI 304 (1.4301) – Surface: inside and outside 2B=IIIC Upper Bottom: With ventilation hose DN 350 With weld-on fitting centrally located on upper bottom DN 65 With T-distributor threaded connection, one side DN 25 other side DN 50 With 2 crane lugs Tank Body: With manhole lid 450x350 mm With connection flange DN 300 for agitator on the side With connector for spray ball under the agitator Lower Bottom: With outlet DN 100 centrally located On 5 adjustable feet Measurements and Weight: Length: 5450 mm Tank Body Height: 3900 mm Diameter: 3300 mm Weight: ca.3,5 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on d ...

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Hydraulic fork positioner 550-2000 mm Fork positioner hydraulically by 550-2000 mm, Stacker, has been in use at 2.5 to can be mounted but on any truck, mast, front loader, etc, with integral Sideshift. Adapter plate with mount slots for cultivation. Dimensions available upon request. Adapter plate surface area approx. 715 x 650 mm. Valve block hydraulic pump can be supplied. Sale and mistakes are expressly reserved. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

Cat.-No. 09-1590-6L new Material: V2A (AISI 304) 1.4301 – Surface inside and outside IIIC upper bottom: Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 lower bottom: With Conical Bottom 45°and rest outlet underneath with forklift and pallet truck content: 1500 l 1100 mm diameter 2250 mm total height Weight 130 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 immersion socket for temperature control Temperature control/digital temperature control/analog All prices are valid Ex-Works, excl.VAT Delivery: from D-97753 Karlstadt-Karlburg Freight Charges: depending on dimensions and destination Subject to prior sale

Inhalt:2.6m? Gewicht:1220kg spoon and Schaufeltyp:ERDSCH Schnittbreite:2700 mm dental system 1U3252 lower hole admission is 50 mms of diameter. upper hole admission is 70 mms of diameter. the shovel is in good one was entitled.

Mounting crane for wheel loader O&K Type.L8-1 Extendable up to 3m.

We have for sale a Vacuum Evaporation Plant: The plant consists of: -3-stage vacuum evaporation system VV 75 KDB -Down-flow evaporator Condest 13 K-Niro Technical details available upon request. Vacuum evaporation is a process that has been used by the large-scale chemical industry for decades. Using vacuum evaporation systems allowed (for the first time) utilizing the advantages of this process also in small and medium-scale applications. Vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection. It is used to treat under vacuum aqueous solutions that contain pollutants. Typical fields of application include: - Recover electrolytes from electroplating - Keeping a uniform rinsing water quality in static rinsing tanks - Volume reduction of sewage wate ...

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...

Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

steel tank 50 m³ / 50,000 litres underground tank / fire fighting water tank / water cistern underground storage in good condition, diesel fuel tank, fuel oil tank volume: 50 m³ / 50.000 litres material: steel tank dimensions: appr. Ø 2,50 m x ca. 10,00 m weight: appr. 8-10 t single-walled, bitumen insulation on the outside The container is in used condition, according to the age there are traces of use. The container can be used as a storage tank for water, liquid feed, whey, molasses, liquid manure, canola oil, seeping juice, AHL/ASL, farm slurry or as rainwater tank, water cistern etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sol ...

P45 - used approx. 30 m³ / 30,000 litres polyester tank / GRP tank, above ground, flat bottom. Food tank, insulated storage tank, water tank, whey tank,.fodder tank volume: approx. 30 m³ / 30,000 litres dimensions: Ø 2.60 m x height approx. 5.75 m weight: approx. 3.0 t The container is in used condition, according to the age there are traces of use. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, canola oil, seeping Juice, farm slurry or as rainwater tank, water cistern etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us  ...

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

7 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -8 Stand / 28 bars -Traverse length 2.70 m -Load per level 2.0 tonnes -Shelf height: 3,00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 250 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commerci ...

3 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -4 Stand / 6 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial custom ...

14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -15 Stand / 28 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU countries (Austria, Italy etc.) with appropriate VAT number (E.g. AT/IT) will each receive a net ...

28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 56 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...

56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 112 traverses -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...