135,570 used machines on RESALE, but how to find them? Machine Search
Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.
Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length : 60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm Distance 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm Distance 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm Distance 90mm (3x) PRICE : € 180,-
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)
Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness ...
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)
Stephan Kitchen Cutter Universal Model FD 622/4D -Stephan Kutter -Aluminium boiler -Boiler with tilting function -2 speeds -with 2 mixing tools -with 1 knife mixing tool
High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation
Scattering unit Scattering BM Tec - with 2 satchels (on both sides) - Running tables individually removable - completely in stainless steel - can be driven on castors - 4 seed containers - with rack trolley for storing the running tables
For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.
This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details.
This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details.
FQJ-1800 honeycomb board cutting machine was built in 2019 in China by SAN (QINGDAO) INTERNATIONAL TRADE CO., LTD. The machine is designed for cutting strips of honeycomb cardboard with a maximum thickness of 80 mm. The high cutting accuracy ensures repeatable dimensions of the elements, thus reducing material waste and increasing the efficiency of the production process. Honeycomb board is characterised by high rigidity, low weight and resistance to compression. Thanks to these properties, it is used as a filling material for interior doors, as well as a protective material for goods during transport. The FQJ-1800 is equipped with three blades that provide a clean, even cutting without damaging the characteristic structure of the material. The adjustable cutting speed from 0 to 50 m/min enables the operating parameters to be adapted to the type of honeycomb board being cut, ensuring ...
Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.
AGIE AGIETRON HYPERSPARK 2 HS die-sinking EDM machine was built in 2008 in Switzerland by AGIE SA. The machine is designed for the production of precision dies, punching dies, punches and other elements with complex geometry using the electrical erosion. This technology enables the machining of workpieces made from difficult-to-machine and hardened materials, and also reduces or completely eliminates the need for further finishing operations, such as polishing. Electrical discharge machining is performed in a tank filled with a dielectric fluid, which affects the surface quality and dimensional accuracy of the machined workpieces. All process parameters are entered in an intuitive CNC controller, which facilitates the daily operation of the machine. The AGIE AGIETRON HYPERSPARK 2 HS sinker EDM is offered with tooling. The total weight of the EDM machine is 2800 kg. Technical specifica ...
Manufacturer: RAS Model: MiniBend Center 79.05 Year of manufacture: 2020 Type of Machine : Bending Center Included: robot KUKA KR16-2, spare parts and tools Find more here - .ucymachines/ Contact us at - sales@ucymachines
Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.
Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46 AR features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46 AR machine we have for sale. Contact us for further details regarding this machine.
Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46A features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46A machine we have for sale. Contact us for further details regarding this machine.
This 4-axis HBS MPW 2010/3K/4MZ/1FK was manufactured in 2019. It features a maximum X-axis travel of 1450 mm and Y-axis travel of 2250 mm, with a motorised working stroke of 0-200 mm. The machine is equipped with advanced servomotor technology and includes a fully automatic stud feeder and a chip extraction unit. If you are looking to get high-quality welding capabilities, consider the HBS MPW 2010/3K/4MZ/1FK machine we have for sale. Contact us for further details.
This 3-axis TOPEDM TSH-400N die-sinking EDM machine was manufactured in 2005. It features a working area of 400 x 400 x 440 mm and a table size of 480 x 458 mm. The machine is capable of drilling holes with diameters ranging from 0.15 to 6.0 mm. If you are looking to get high-quality hole drilling capabilities, consider the TOPEDM TSH-400N machine we have for sale. Contact us for further details.
Cutting length X/Y: 250mm/250mm, max. sheet thickness steel/stainless steel: 6mm/4mm, table dimensions X/Y: approx. 1200mm/900mm, weight: approx. 1200kg. Including a 500mm stop extension. An on-site inspection is possible.
A compact electroplating unit is offered. Electrolytic bath for gold and silver refining applications, control: microprocessor control. Equipped with an integrated control unit with display and keypad. Weight: approx. 15kg, overall dimensions X/Y/Z: approx. 450mm/300mm/350mm. Inspection by arrangement is possible.
Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.
Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.
Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.
Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible.
Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.
Clamping force: 800kN, an on-site inspection is possible.
Connection: 380V/50Hz, current consumption: 7.1A, power: 2.1kW, weight: approx. 400kg. The machine was removed from production in working condition approx. three years ago and subsequently placed in storage. CE marking available. An on-site inspection is possible.
Four identical Kettma Hamburg 100 KA linking machines, one KMF 105 linking machine, Series 5, and spare parts are available, an on-site inspection is possible.
Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible.
X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible.
Horizontal turning machine manufactured in 2007. This Mazak QuickTurn Nexus 200 CNC lathe features an 80 mm spindle bore and comes equipped with a bar feeder, collet chuck, and Matrix control. The machine has a weight of 4380 kg and includes tooling. If you are looking to get high-quality turning capabilities, consider the Mazak QuickTurn Nexus 200 machine we have for sale. Contact us for further details.
Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine.
Roll bending machine manufactured in 2006. This FACCIN 4HEL 2134 features a maximum plate width of 2,100 mm and a maximum plate thickness of 28 mm. It is equipped with linear guides and has a top roll diameter of 350 mm. If you are looking to get high-quality rolling capabilities, consider the FACCIN 4HEL 2134 machine we have for sale. Contact us for further details.
Deburring machine manufactured in 2008. This Costa LEVIGATRICE MSH3 CCVC 1350 features a working width of 1,350 mm and accommodates workpiece thicknesses ranging from 0.5 to 250 mm. It is equipped with inverter-driven motors, a vacuum system, and belt cleaning blowers. If you are looking to get high-quality deburring capabilities, consider the Costa LEVIGATRICE MSH3 CCVC 1350 machine we have for sale. Contact us for further details.
CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details.
This 4-axis ONA KE500 wire EDM machine was manufactured in 2004. It features a maximum workpiece weight capacity of 5000 kg and a Z-axis travel of 400 mm. The machine offers impressive X-Y travel dimensions of 700 x 500 mm and U-V travel of 460 x 460 mm. If you are looking to get high-quality wire EDM capabilities, consider the ONA KE500 machine we have for sale. Contact us for further details.
Size: 560 x 900 mm Equipments: Flat pile feeder 6 bags Cross-fracture aggregate Integrated cutterblocks Electrics & Meters Maximum format: 560 x 900 mm Minimum format: 100 x 150 mm
Spiral dough kneading machine Kemper SP 125 L used bakery machines, kneading machine spiral kneader with solid stainless steel boiler from Kemper robust and stable, spiral kneader Kemper SP 125 L for the production of high-quality Teigen.Es can roll dough, bread dough, pastry dough and similar doughs.Kemper spiral kneaders work on 3 zones kneading principle spiral guide rod so the doughs become woolly, processing-friendly with maximum oxygen input in the dough. Kemper Spiral Kneader - Stainless steel boiler - Stainless steel spiral - 2 x timers automatic - 2 x speeds slow and fast - with flour dust cover - for 125 kg of flour or 200 kg of dough Machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.
GKM Siebtechnik KTS-V 600/1 – Vibratory tumbler screening machine (YOC 02/2021) Professional vibratory tumbler screening machine from GKM Siebtechnik (Waibstadt). Type: KTS-V 600/1 Serial Number: 3794 Year of construction: February 2021 Technical features: • Size 600 (sieve diameter approx. 670 mm) • 1-deck design • High-frequency, three-dimensional screening movement • High acceleration (suitable for dry and wet screening) • Modular, self-centering design • Parts in contact with the product in stainless steel • Maintenance-free vibration motor • CE and EAC compliant • Manufacturer: GKM Siebtechnik GmbH, Felix-Wankel-Str. 11, 74915 Waibstadt The machine is used, but fully functional and ready for use. Ideal for classification, fractionation and dedusting of dry and moist bulk materials in the food, pharmaceutical, chemical, plastics, minerals ...
Gurutzpe Super A lathe. Distance between centers: 6.000mm. Swing: 1020mm. Swing in carriage: 745mm. Swing on gap: 1440mm. Spindle bore: 140mm. Speeds: 16 (9-500rpm). Equipped with 4 independent chuck and steady rest. Equipped with new universal chuck of 500mm. Equipped with new DRO Fagor. Equipped with new Multifix turret. Motorized carriage. CE protections and european certificate for second hand machines.
Unbek. Type, YOC ca. 1990, Revision 2002 Specifications: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. Double-sided bending function - Hydr. Delivery ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. Voltage - Bending tools
Bang & Co SAP 603 strapping machine – built in 2016 – fully functional + 2 rolls of tape Sell a used, fully functional Bang & Co strapping machine model SAP 603. Nameplate): • Model: SAP 603 • Machine No.: 15015642 106 • Year of construction: 2016 • Power connection: 230 V / 50 Hz • Manufacturer: Bang & Co GmbH, Oberursel • CE marking available Condition & Scope of Delivery: • Fully functional and ready to use • Good used condition • Also included: 2 rolls of strapping Ideal for commercial use for secure strapping of cartons, parcels and packages. Sale: • Delivery possible • Pick-up available If you are interested, please contact us - more photos/videos or a demonstration on site are possible.
Specifications: - max. material thickness at 40 kg/mm² strength approx. 3 mm - Shaft mount 45 mm - manual hydraulic feed of the top roller - E. foot switch - Drive 400 V / 1.1 kW - Space requirement approx. W 550 x H 1200 x D 1200 mm - Weight approx. 180 kg
maximum number of results exceeded
please refine your search
