long used for sale

Weight range: 295 - 455g; With resting station; with pedestal

Weight range: 295 - 455g; With resting station; with pedestal

Power: 2.2kW

chuck angle-adjustable: 55°-0-50°; motor power: 2.2 Kw; height adjustment: 0-200mm; transverse travel: 230mm; Equipped with pneumatic clamping

Longitudinal X: 6000 mm Radius: 100 mm Drilling capacity: 100 mm Spindle taper: 100   CNC Brand: Siemens CNC Model: 840D incl. Boring shaft   75 x 5900 incl. Boring shaft   94 x 5900 incl. Boring shaft 106 x 5900 incl. Boring shaft 130 x 5900  Max. drill Ø steel:250mm Spindle bore:      100mm Drilling depth:    6000mm Power on spindle:  63kW Speeds / ranges:   750Rpm Length:            18000mm Width:             3800mm Height:            2100mm Weight:            35000kg

Table/ magnet clamping plate dimensions: 760x200/ 500x250mm, length: 1900mm, width: 1500mm, height: 1950mm, weight: 1.6t, with documentation and accessories.

Band dimensions: 150x7800mm, grinding width: 1000mm, power: 6.6kW, length: 3950mm, width: 2300mm, weight: 900kg.

The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible.

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) is perfect solution for longitudinal cutting of coil metal into strips. This line can work with very big coils up to 74,000 Lb weight and 0.25 inches maximum metal thickness. Line is strong enough to make cutting speed 200 – 600 fpm depends on metal thickness and width you work with Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Manufacturer: PRO ECO Material: CRS, HRS, HPP & O Material Width: 12″ – 72″ Material Thickness: .060″ – .250″ Coil Weight: 74,000Lb Coil ID: 20″ – 30″ / 20″ – 24″ Coil OD: 72″ Line Speed: 200 – 600 fpm Direction: L-R Three (3) Coil Storage Ramp Coil Car Powered Lift & Traverse Double Cone Uncoiler Sliding Base Dual Water Cooled Brake Feed-Up Motor Powered  ...

Inv. Num. : 6635 Type: 16 GLS 25-90 Producer: Coburg Created: 1985 Parameters: Max. speed: 285-1700 1/min Maximum distance between tailstock tips: 4120 mm Max. thread diameter: 14-90 mm Equipment: Replacement clamping bushings Circular knife sets

barfeed Iemca mod.CS112/31 - tool eye - some accessories - Fanuc 0T Control

Longitudinal circular saw Irion Cutting height 140 mm Cutting length 6000 mm Parallel cutting width 400 mm L x W x H: 8.0 x 1.6 x 1.2 m Year of construction: 1968 Weight approx. 2000 kg The machine is in good condition, operational. Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Cutting length: 5320mm; Cutting height: 160mm; Feed rate: 0 - 80m/min; Width stop adjustment: electric; Display Cutting width: digital; Motor power: 11kW; Machine length: 7135mm;

Band width: 150mm; Table size: approx. 2500mm x 800mm; Suction port: 140mm; Motor power: 3kW; Machine length: approx. 3400mm; Machine width: 1200mm; Weight: 400kg; Robust design also allows the machining of longer workpieces grinding unit swivels, thus can also be used as an edge grinding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the abrasive belt High belt speed of 17 m/s right-counterclockwise rotation Upper sanding sole with graphite coating 4-ply sprung sanding pad With movable sanding pad for oblique surfaces Smooth-running grinding table even under high loads due to heavy workpieces Optimal price-performance ratio

Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - wi ...

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR

Technical data (subject to change) Space requirement 4,200 x 2,600 mm Tape measure 7,800 x 150 mm Table size 2,900 x 1,400 mm usable working length between the uprights max. 2700 mm Table lift by means of handwheel 340 mm Offset right 1100 mm Weight approx. 1300 kg (Compressed air connection required)

directional control valve, hydraulic valve, with piston longitudinal gate valve ORSTA 04-307.51/81.1-0 TGL 26223/20 nominal diameter: 0.4 32 MPa ( 320 bar ) 10 dm3/min ( 10 l/min ) 1 x control magnet G35-H 24 V DC width across flats: 24 mm screw thread: M20 x 1,5 New ! Dimensions: 132 x 36 x 74 mm

VERSION 10 PNC axes - Control: FANUC PNC DECO - Rod passage 20 mm - movable headstock Z1 - Speed 10,000 1/min - 2x cross slide with 2x5 tool holders - 10 pre-adjustable tool holders - 4 front units - Counter spindle - Backside processing (4x end, 3x landscape) - Workpiece conveyor - Spaenefoerderer - Tool presetting device - Fire extinguishing system - Central lubrication unit - Oil mist extraction, filter mist - Drill quills, base holder and steel holder - various accessories (see photos) - Rod loading magazine Robobar

CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...

Key data: 16

Star SA 16 R, year 06/2001 Loading magazine FMB Minimac 3200 "A" year 2001 Machining diameter: up to 16 mm With tapping spindle 4 quills for front/back processing 3 driven cross tools

Control Fanuc PNC Deco Bar passage 26 mm (32 mm) Max. turning length (max. workpiece length in one clamp) 240 mm Spindle speed range of the main and counter spindle 0 - 8,000 rpm Max. drive power 7.5 kW Max. number of tools on the guide bush 10 Max. number of tools in combination attachment 4 Max. number of tools in counter operation 7 Max. number of axes: 10 (12/C-axis) Accessories: Chip conveyor, loading magazine FMB Robobar SSF-532

Brötchenlangwirkm. Fabr. Frilado, Type ANL

Brötchenlangwirkm. Fabr. Frilado, ANL

Brötchenlangwirkm. Frilado, ANL-S

Toastbrot-Langwarkmaschine, Fabr. Benier, Type MI 600 with 4 four pieces furnishing,

Type 330 - Iemca Boss 542/32 new in 1997 - chip conveyor - Fanuc 16TB Control - the machine has always worked with oil

serial no.Q16521 - Iemca Boss 332E-r/32 new in 2009 - drilling milling head (GSE 11107) - chip conveyor - Mitsubishi Meldas 700/730LUC? Control.

CNC Model: Fanuc - CNC Version: 31i - MODEL B - Main spindle power: 3,7Kw Main spindle bar clearance: 20mm - Headstock stroke (Z1): 205mm - Number of spindle revolutions: 10000 Number of linear axes: 6 Number of fixed tool spaces for tool plates: 13 Number of motorized tool plate spaces: 6 Rapid feeds linear axes X Y Z: 35m/min High cooling pressure: yes Pressure value: 20bar Counter-spindle: yes Number of counter-spindle revolutions: 10000 Power versus spindle: 3,7Kw Bar clearance: 20mm Fixed counter-spindle front tools: 2 Number of motorized rear tools: 8 Refrigerant used: emulsion Model and brand bar magazine: Iemca 332 E Chip evacuator: carpet Other technical data: Manually adjustable angular rostrum Machine equipment: Set of fixed and motorized tool holders :::D IMENSIONS AND WEIGHT::: Length: 2334mm Width: 1200mm Heigh ...

Code: 0138 Brand: SOCOMEC Model: LN 260 - CE Standard Belt sanding machine with double goose neck for wood, furniture, steel, aluminium, metals, plastics etc. - CE Standard Technical data: Table length mm 2600 Table width mm 800 Vertical table stroke mm 570 Gooseneck height mm 700 Pulley diameter mm 250 Main motor Hp 4 Speed rpm 1400 Belt width mm 120/150 Belt length mm 7050 Belt rotation reversal Suction mouth diameter mm 120 Overall dimensions mm 3600 x 900 x 1400 h Weight kg 460

Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm

Type 660 - Iemca Boss 332E/32L new in 2005 - machine that has ever worked in oil - Fanuc 18i-TB Control

Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,

Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985

Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993

Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991

Manufacturer: Heesemann, Type: Hochglanzpolierautomat BA 2, Year: 1989, Belt length mm: ca.9500, Sanding hight mm: ca.200, Table width mm: 1350, Table length: 2530, Sanding belt engine kW: 11/15, Fan for chips: yes, 2 rotary directions: yes, Stop straightedge: yes, Presentation possible: yes, FREE TEXT: Saugspann Anlage/Bandstrahleinrichtung/ Frequenzregelung Schleifband/Schaltschrank Neu, Year :1989

Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992

Traub TNL 12 - 7, Built in 2002, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,

Traub TNL 12 - 7, Built in 2002, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,

Traub TNL 12 - 7, Built in 2006, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,

equipped with Iemca Boss 432r/32LL new in 2002 - some tool holders - chip conveyor - Mitsubishi MELDAS 635 Control

This machine was powered only by oil. General: Year of construction 2011 Control Fanuc Series 18i TB Main spindle 15,000 rpm Counter spindle 10,000 rpm Rod diameter max. 10 mm Rapid traverses 35 m/min Dimensions: 1,860 x 780 mm x 1,500 mm Weight 1,500 kg Other equipment and accessories: C-axis Part ejector Coolant tank Kraft & Bauer extinguishing system Bar feeder FMB micromag 3200

General: Built in 1999 Control Fanuc Series 16T Working spindle 500 – 10,000 rpm Turning diameter 20 mm Headstock stroke max. 205 mm Dimensions: 2,670 mm x 1,375 mm x 1,650 mm Weight 3,400 kg Further technical data: Express feed X, Y: 15,000 rpm Express feed A, B: 15,000 rpm Rapid feed Z1, Z2, E: 18,000 rpm Rapid feed C: 90,000 °/min Smallest input unit: 0.001 mm Smallest input unit C-axis: 0.001° Other equipment and accessories: Conveyor Bar feeder FMB turbo 3-26-3200

Hanwha STL 38 sliding head lathe :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 38mm Headstock stroke (Z1): 320mm - Main spindle speed: 8000 - Number of linear axes: 8 - Number of fixed tool positions on the tool plate: 5 Number of driven tool holder plate tool slots: 4 Rapid feeds for linear axes X Y Z: 32m/min High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 tool-holder-type-first-turret-slide: VDI 30 X-axis-stroke-first-turret-slide: 140mm Y-axis-stroke-first-turret-slide: + - 50mm Sub-spindle: yes Sub-spindle speed: 8000 Power against spindle: 11Kw Bar clearance: 38mm Counter spindle stroke Z : 320mm Number of fixed rear tools: 4 Refrigerant Used: Neat Oil Bar Feed ...

Sliding head lathe Tornos Sigma 20 :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 31i - Model A - Main Spindle Power: 5,5Kw - Main Spindle Bar Clearance: 20mm Headstock stroke (Z1): 230mm - Main spindle speed: 10000 - Number of linear axes: 6 - Number of fixed tool positions on tool plate: 6 Number of driven tool holder plate tool slots: 8 Rapid feeds for linear axes X Y Z: 30m/min High refrigerant pressure: yes Sub-spindle: yes Sub-spindle speed: 10000 Power against spindle: 5.5Kw Bar clearance: 20mm Number of fixed rear tools: 6 Number of motorized rear tools: 3 Refrigerant Used: Neat Oil Bar loader model and brand: Robobar SBF - 532 Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2400mm Width: 1380mm Height: 2050mm Weight: 3000kg

Star SV32 sliding head lathe ::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - TB - Main Spindle Power: 7,5Kw - Main Spindle Bar Clearance: 32mm Headstock stroke (Z1): 310mm - Main spindle speed: 7000 - Number of linear axes: 7 Number of fixed tool holder plate positions: 4 Number of driven tool holder plate tool slots: 3 High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 3.7Kw Bar clearance: 32mm Z stroke sub-spindle : 150mm Refrigerant Used: Neat Oil Bar magazine model and brand: Iemca Boss 432 Chip conveyor: belt conveyor Machine equipment: Set of fixed tool holders, motorized and tilting :::D DIMENSIONS AND WEIGHT::: Length: 2645mm Width: 1403mm Height: 1680mm  ...

Longitudinal carriage, chassis, welding carriage, longitudinal carriage, automatic welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner, welding tractor -Stable, compact and modular design -4-wheel drive via stepper motor -Wheels with polyurethane treads -Excellent directional stability -Viscose damper for constant driving -Integrated position measuring system -Reinforcement frame with mounting spigot for wire feed -4 pieces of lifting eyes -Power supply and PLC power unit integrated in the chassis -Power cord with plug: 12 m -Control line to the power source: 10 m -Incl. Hose package

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg