137,150 used machines on RESALE, but how to find them? Machine Search
Fully reconditioned spindle moulder with saw disc and sliding carriage (Steton, Italy). Spindle tool diameter up to 300 mm, carriage travel 110 cm, mitre fence with clamp, saw disc diameter up to 400 mm, spindle shaft 50 mm, 2 speeds on the spindle motor, 380 V supply. Technical inspection carried out by our specialised technical department. Further technical specifications are not confirmed for this specific unit - please contact us for details. Fully reconditioned Auction-ID: A7-50988-71
Fully reconditioned spindle moulder with saw disc and sliding carriage. Saw disc moves vertically and horizontally, independent motors: 3 HP / 380 V on the saw disc and 4 HP / 380 V on the spindle. Carriage travel 75 cm, saw disc diameter up to 350 mm, spindle shaft 50 mm, carriage clamp with mitre fence, spindle tool diameter up to 250 mm. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-72
Swivel spindle milling machine KÖLLE F 45 very good condition, the machine comes from an assembly company and has only stood for the last few years, it was no longer needed everything works perfectly all bearings and guides are OK, the machine has a very smooth running Year of Make: 1990 with control panel at the top on the milling fence, both stop jaws can be adjusted in depth, with fine adjustment and scale, so dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, which allows very precise and fast adjustments with AIGNER integral stop with spindle lock by lever the chips can be discharged very well, with 2 suction nozzles, 125mm at the milling stop and at the machine table it is 100mm with 30mm spindle, which can be swivelled continuously from -5 t ...
Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer
Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment
Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW– Fence / Near 11 kW – Top 7,5 kW – Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included
Capacity: 230 x 130 mm. Number of shafts: 9 Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kW Kardan drive Pneumatic pushers Front surface table Feed rollers for short workpieces Manually operated pump for bed lubrication Shaft diameter: 50 mm. Powered rollers in the table Feed: 6 - 36 m/min Motorized height adjustment
Panhans swivel spindle milling machine with 4-roller feed With tenon table Panhans 1376 Type: 231 Series: 2000 Year of manufacture: 2000 CE Table size L 1100 mm x W 760 mm, table height 870 mm Motor power 7.5 kW, with motor brake Speeds 3000/4500/6000/9000 rpm. Height adjustment of the milling mandrel 120 mm Milling mandrel clamping length 120 mm with retaining ring Milling mandrel diameter 30 mm Swivel range -5° to +45° Height adjustment and swivel by handwheel Table opening min 70 mm, maximum 270 mm Milling fence with digital display Suction nozzle diameter 2 x 120 mm Belt quick release device Cutter quick clamping device Right-left rotation via rotary selector switch 400 V/N/PE / 50 Hz / 3 pH Current type AC Full load current 22 A with 4-roller feed Haffner with 8 speeds including new feed rollers including Panhans 1376 tenon table for mounting on machine t ...
Screw Compressor - Kaeser CSD105 Description: Very good technical condition Operating hours: 15,000 h Power: 55 kW Max. pressure: 8 bar The device has been regularly serviced by an authorized Kaeser service center in Italy All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Swivel spindle milling machine VEMA TFMS 2-4 very good condition, as good as new, the machine comes from a penitentiary and has only stood for the last few years, it has been used very little and only operated by one person the company VEMA comes from northern Germany, the machine is similar in design to the KÖLLE F45 or the PANHANS 240 everything works perfectly all bearings and guides are OK Year of construction 1998 the machine has the control panel at the top with milling stop, which can be adjusted in depth on one side or completely, this is possible with a handwheel, there is a mechanical counter for the complete adjustment, the counter can be set to zero at any point at the touch of a button, so the stop can be adjusted quickly and very precisely both stop jaws can also be adjusted individually, there are also 2 mechanical counters, due to the one-sided adjustment, dres ...
Weinig Hydromat 17B high-performance planer and moulder, year 1989. Heavy modular cast construction for precise continuous wood machining. Feed speed 5–35 m/min, feed motor 5.5 kW, 380 V / 50 Hz, 2,000 mm table, 10 mm stock removal adjustment. Siemens S5-130 WB CNC with 12-inch display and up to 16 axes. Includes EHM 14 feeding magazine: 220 mm working width, workpiece length 300–3,000 mm, pneumatic feed, 6 bar, up to 100 cycles/min. Last overhaul 2022; last service 2024.
TECHNICAL DATA: Work table: 1100 x 900 mm Spindle: Ø 35 mm Height adjustment: manual Direction of rotation adjustment Installed power: 5 kW EQUIPMENT: 01 Single-roll feed (IG MECCANICA)
Table dimensions: 1100 (2300) x 760 mm Motor output: 5,5 kW Spindle diameter: 30 mm reus: 3000/4500/6000/9000 U/min Weight: ca. 800 kg Panhans swivel milling machine 245|100 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 870mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Speed 3000 / 4500 / 6000 / 9000rpm Engine power 5.5 kW (7.5 hp) Net weight approx. 800kg technical description Touch control can be used either above or below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display (w ...
Automatic shrink wrapper with shrink tunnel. Equipped: - Plastic pallet conveyor for product infeed, width 600 mm - length 2650 mm - 1 film reel holder. Film to be used between 0.25 and 0.30 COF - Sealing bar 550 mm wide for sealing the film around the products. - Pneumatic cylinder operated pusher to push the load onto the tunnel conveyor. - Thermostatically heated electrically heated shrink tunnel with ventilated air. - Internal dimensions of the tunnel length 1000 mm - width 560 mm - height 350 mm. - Conveyor in stainless steel mesh tunnel, length 2100 mm - width 560 mm. - Electric heating of the sealing bar with temperature adjustment by electronic controller. - Electric tunnel heating with electronic regulator. - Tunnel conveyor variable speed drive. - Stainless steel frame - Mounted on wheels - Maximum production: approximately 30 bundles/minute depending on ...
Manufacturer: WEINIG (Michael Weinig AG) Model: Powermat 700 Machine type: Four-Sided Planing and Moulding Machine Year of manufacture: 2023 Machine No.: 10008719 Standard Technical Specifications: Working height: 10–160 mm Working width: 20–230 mm Spindle speed: 7,000 rpm (except straightening spindle) Feed speed: 5–40 m/min, frequency controlled Max. tool cutting circle on horizontal spindles: 200 mm (except 1st bottom spindle) Max. tool cutting circle on vertical spindles: 200 mm Standard motor power, vertical spindles: 7.5 kW Standard motor power, horizontal spindles: 7.5 kW Standard Equipment / Control: Comfort Set operating concept Memory Plus control Electronic digital read-outs Pressure shoe in front of top spindle, feeding from the tool Spindles started and stopped by frequency converters Electrical Data: Operating voltage: 3 × 400 V / 50 H ...
Technical details Configuration: 5-spindle machine Spindle layout: - Bottom spindle (jointing) - Right spindle - Left spindle - Top spindle - Bottom spindle Working capacity: - Working width: 20–230 mm - Working height: 10–160 mm Feed system: - Feed speed: 5–40 m/min - Feed motor power: 5 kW - Electronic infinitely variable feed adjustment - Pneumatic lifting/lowering of feed roller before first spindle - Quick-change feed rollers - Serrated feed roller Electrical specifications: - Supply voltage: 400 V - Frequency: 50 Hz - IE3 Premium Efficiency motors Control system: - Memory Plus touchscreen control - Storage of axial and radial spindle positions - Electrically adjustable pressure elements - Guided machine setup Right spindle: - Motor power: 11 kW - Spindle diameter: 40 mm - Speed: 7000 rpm - Axial movement: 80 mm - Maximum profiling depth: 35 mm Left spindle: ...
Code: 0512 Brand: CASOLIN - ITALY Model: F 45 KL - CE Standard Automatic spindle moulder with tilting spindle (-10 to +45°), extended tables and automatic feeder, for joinery, furniture, custom-made furniture, window and door frames, doors, panels, sawmills, plastics and various – CE Standard Spindle diameter 35 mm Motorised spindle lifting Motorised spindle tilting (-10 +45°) Decimal display for spindle height Digital display for tilting Digital display for speed Precise worktable adjustment system by handwheel positioned on the front of the machine Extended worktables (2550 mm) with a removable support for large workpieces Spindle head movement by prismatic guides: high positioning accuracy Micrometric adjustment of the feed table with millimetre scale Quick locking and unlocking operations for spindle head positioning Spindle rotation reversal Useful spindle ...
Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm
Kat-No 10-1845 in very good condition! With friction gear motor for infinitely variable speed adjustment Stable and mobile application On frame with steering wheels with stopper, foot-adjustable With guide stripfor bottles and cartons transport Dimensions and weight: Bandwidth:8 cm Total width:38 cm Total length: 830 cm Height:100 cm Weight:200 kg Supplement: 895€ for frequency inverters For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.
used
Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation
Longitudinal slitting machine for paper. NEW. Cutting to length (columns) paper or foil to approx. 70 cm width-Perforieren paper, labels, cards, forms -6 Circular blades (blades), or alternatively 6 perforating knife holder -Maximum paper width 70 cm Shipping is possible with extra charge.
Properties < b >: < / b > Used belt conveyor Color: grey SEW geared motor available Feet to be ordered separately Material: Steel Ideal for the fast material handling Expertly disassembled and packed Condition: fully operational Technical data < b >: Mass of the belt conveyor < /b > Overall length: 1,040 mm Overall width: 700 mm the belt < /b > details < b > Belt width: 600 mm Belt type: smooth the framework < /b > details < b > Frame height: 160mm the motor < /b > details < b > SEW-EURODRIVE Type: R27 DT90S4/BMG/HR kW: 11 Belt conveyor < b > < /b > The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. During transport, the belt conveyor can promote sensitive and different-sized containers, boxes or other packaging and a ...
approx. 2,700 longitudinal bracing, for longitudinal bracing as an alternative to cross bracing, LV 3134 for span length 1,282mm – used - : Price per piece ex site: only 4.- € (net)! 4 pieces are needed per field! Manufacturer: SSI Schaefer Type: LV 3134 Year of construction: 2021 Field length 1,282mm Shelf height 40mm Original price per piece: approx. 12.-€ (net) Longitudinal braces Sheet steel, painted light silver. For longitudinal bracing as an alternative to cross bracing, if cross braces in the double rack interfere with storage or if both sides are to be operated in the single rack. In order to ensure subsequent height adjustability, the frame distance for double racks must be at least 30 mm. In each shelf space of a rack row, the lower and upper shelves are to be provided with 2 longitudinal supports (for shelf heights up to 2967 mm). The form-fittin ...
Long belt Sanders for intermediate lacquer sanding Technical data: Grinding width: max 2,300 mm, min. 200 mm Workpiece height 8-200 mm 1.Schleifbandmasse 100-120 mm x 9000 mm 2.Schleifbandmasse 150 mm x 9000 mm Pressure plate tape measures 10 x 7280 mm Speed 4-12.5 m / min Suitable for intermediate lacquer sanding Grinding motor power kW 10/16 Total power: 20 kW Machine dimensions approx. B 4590 x L 2344 x H 1640 mm Engine weight 2150 kg
ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) hopper feed mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900
Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration
Unwinding reel / decoiler â?¢ Bandwidth / strip width max. 1,500 mm â?¢ Tape thickness / strip thickness (430 N/mm2) 0.5-2.0 mm â?¢ Coil outer diameter / coil outer - 1,300 mm â?¢ Coil inner diameter / coil inside - 470-520 mm â?¢ Coil weight / coil weight 10,000 kg â?¢ Side shift / side shift . . . . . . . . . . . . . . . . .
CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg
MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II
Long belt grinding machine, roller spacing approx. 3000 mm
Bandwidth / strip width 1,500 mm Strip thickness / strip thickness 0.4 - 1.5/2.0 mm Number of straightening rollers / no. of straightening rolls 6 pcs./no. Number of feed rollers / no. of feeding rolls 4 pcs./no. Longitudinal shears 3 pairs Speed 20 m/min Cross shears 1,500 x 2.0 mm Straightening rolls 100 mm Foil coating on top / foil coating on top
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 560 mm -long jaws -Cone: Ø 120 mm -Through hole: Ø 110 mm -Hole circle: Ø 170 mm -Weight: 94 kg
Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg
Long goods box jack, box jack, crane traverse -Manufacturer: Scheffer Crane Technology -Load capacity: max. 1500 kg -Arm length: 750 mm -Box size: 3000x1000 mm -Empty weight: 620 kg
Storage containers, transport storage containers, long goods racks, long goods pallets -Long goods frame: Stackable long goods pallet, length 6280 mm -Crane eyes: 4 pieces -Number: 7x long goods rack available -Price: per piece -Dimensions: 6280/640/H550 mm -Weight: 162 kg/piece
Technical data : Bandwidth / strip width 1,500 mm Strip thickness / strip thickness (420 N/mm2) 0.5 - 2.0 mm Coil weight 7,000 kg Longitudinal sections • 2 mm: 4 pcs. • 1.5 mm: 8 pcs. • 0.6 mm: 10 pcs. Shranded. / speed 20 m/min Length tolerance / length tolerance ± 0.5 mm Power / power 19.5 kW
maximum number of results exceeded
please refine your search
2.000 € 
