long moulder used for sale

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

Weibert F40 - Table milling machine Milling spindle 30mm 90° Speeds: 1400/ 3500/ 6000/ 8000 rpm Casting table length 1000 mm width 500 mm Motor 2.2kW 400V Integral Safety Rails 500mm Pressure Device MORI Table extension right and left Right-counterclockwise rotation of the milling spindle

Technical details: - Milling spindle swivels and height adjustable! - Adjustment displays of the milling spindle analogue on the handwheel - Spindle can be swivelled from -10° to +45° - Diameter of milling spindle (assembled): 30 mm - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm (mechanical changeover) - Display of spindle speed via indicator lamps - Mechanical spindle lock - Spindle right-left rotation - Milling mandrel mount: MK55 - Machine table length: 1,140 mm (without extension) - Max. table width: 840 mm - Working depth (up to cutter shaft): 430 mm -Table height: approx. 830 mm - 2 x adjustable milling stops (height: 150 mm, length: 430 mm (plus wooden extension) - Max. diameter table opening: 230 mm (3 rings) - 2 x suction nozzles, diameter 120 mm per nozzle Engine data: - Two-stage speed - Manual star-delta circuit - Voltage: 380 V - Current ...

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

Motor 5.0 kW/380 V/50 Hz/13 A, 2 speeds, clockwise/counterclockwise rotation, feed 3 rollers, switched socket for feed, stop can be rotated with fine adjustment, stop jaws 560x150 mm, work table 1010x900 mm, table extension right 500x440 mm, extension 2 m to 520 mm extendable, height and side adjustable slot table 810x400 mm, with hold-down and 90° adjustable stop, removable additional support 1070x170 mm with angle stop (Aigner), 4 speeds 3000/4500/6000/9000 rpm (2x belt fold, 2x electr. switchable), suction connection D=2x120 mm

Used spindle moulder PAOLONI mod. T160L Long tops Removable front guide spindle moulder guide with total movement by means of a handwheel Folding spindle moulder guide Swivel support for advancement Hanging control panel Motorized spindle lifting interchangeable shaft Year of manufacture 2003 EC

TF170E Table milling machine with sliding table 1m with transverse stop

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

RM GROUP spindle moulder model SM120: – shaft D=35mm, with manual lift – motor kw 4 / hp 5.5 , volt 380 – 4 shaft rotation speeds: 4200/6000/8000/9700 rpm Year 2007. Machine not compliant with CE regulations, for export

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

TECHNICAL DATA: Work table mm: 900 x 900

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990

SPECIFICATIONS: Shaft: Ø 40 mm Table size: 1100 x 900 mm 1 4-roller drive Installed power: 6 HP

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981

Table milling machine Schröder Table length 2480 mm Extendable table support Milling spindle in the machine diameter 30 mm incl. milling spindle diameter 40 mm with 4 rollers feed wood with mechanical spindle brake by foot lever Weight approx. 800 kg

There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible.

Sliding table saw and table milling machine Felder KF 700 S YOC 2024 Format carriage length 2500 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 850 mm with digital display Electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Cutting height max.110 mm Table milling machine motor 5.5 kW Spindle tiltable 0-45° Left/right rotation selectable Speed 3500 / 6500 / 8000 / 10 000 rpm Max tool diameter 230 mm Spindle diameter 30 mm Total weight approx. 700 kg

Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...

Key data: 3 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...

Key data: 1 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table  ...

Key data: 3 mm, 8 kW, 30 mm

Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change  ...

Key data: 3 mm, 6 kW, 30 mm

Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...

Key data: 3 mm, 10 kW, 3 mm

MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm

Key data: 2 mm, 8 kW, 40 mm

Panhans 245 Easy Swivel Spindle Milling Machine Brand: Panhans Type: T26 CNC M-No.: 245 Easy Year of Make: 2008 Control: 2-axis electric control, spindle height and inclination, 2-fold handwheel adjustment with digital readout stops together and right stop in offset Control panel: Eye level, Rotatable Motor power: 7.5 kW Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm with SK40 and mandrel fix quick coupler Height adjustment milling spindle: Electric height adjustment with fast and creep gear Adjustment range 150 mm Electro-pneumatic milling spindle locking mechanism Central lubrication with long-lasting grease Speed: Frequency controlled, with digital display, automatic brake, central lubrication Spindle holder: Mandrel snelwisselsysteem (pneumatic locking) Table size: Table widening on both sides, 2405mm with extendable support front Axis  ...

MARTIN T90 Four-sided crane with NC control and 6 spindles and swing axle (Left3) Specifications: Brand: MARTIN Type: T90 with 6 spindles incl. pendulum axle (left 3) Year of Make: 2023 A1 - Refurbished and Repainted M-No.: V239722 Operating hours: 5,962 hours Feed table: 2000 mm Table height adjustment: Max. Spahn name 10 mm Stop bar: Manual adjustment 10 mm Planing width: 22 - 260 mm (profiling width top 4 is 260 mm, spindle 5 & 6 is tool dependent) Planing thickness: 5 - 160 mm (profiling width right/left is 160 mm, spindle 5 & 6 is tool dependent) Planing shaft: 1st spindle, with max. 10 mm decrease, 260 mm, flight circle min. ø100 mm - max ø125 mm Calibration planing and contour shafts: 2 & 3 spindles (vertical spindles) max. 10 mm, clamping length 160 mm, flight circle min. ø100 mm - max ø125 mm Thickness shaft/upper shaft: 4th top spindle  ...

Key data: 1000 mm, 40 mm

SPECIFICATIONS: Spindle: Ø 40 mm Table size: 1000 x 1100 mm Installed power: 7.5 HP Electronic height/tilt adjustment

Mill-tenoning machine SCM Flex 1 Spindle diameter 40mm Total spindle height 200mm Two-speed motor with a power of 6.6/8kw Variable speed on belts: 3250/6500 and 5000/10000r.p.m Electric spindle lift Maximum cutter size 270mm Cutting unit 2.2kw Automatic Sidecar Pneumatic material clamps Four-roller feed Net price

SPECIFICATIONS: Table size: 2400 x 900 mm Extendable table 1 4-roller drive (with variator) Installed power: 5 kW Lockers Ø 35 mm Motorized spindle tilt +/- 45° Motorized height adjustment Dornfix clamping system

Spindle moulder with tilting shaft SCM mod. T110I - CE -Volt. 400/50 - Matr. AB/118120 - Year 1998

SPECIFICATIONS: Feed length: 1970 mm Working width: 230 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Direct drive / cardan (0.25 kW x 3 motors) Speed: 6000 rpm Installed power: 22.9 kW Voltage: 380 V Spindle configuration: I Bottom (4 kW) II Right - Left (7.5 kW), Left equipped with electronic control III Top (5.5 kW) equipped with electronic control IV Bottom (4 kW) EQUIPMENT: Complete with tools

SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 6 Shaft drive (4 kW) Speed: 6000 rpm Installed power: 43 kW Equipped with ATS system for automatic adjustment Voltage: 380 V SPINDLE CONFIGURATION: I bottom (5 kW) II right (11 kW) III left (11 kW) III above (11 kW) IV top (5.5 kW) VI bottom (4 kW) EQUIPMENT: Complete with tools Accessories CE

SAC SUERI fixed shaft spindle moulder mod. TS110 - CE compliant - Extended 2400 mm plates. -Volt. 400/50 - Matr. 9813 - Year 1998 - M42 - Complete with manual and CE declaration