137,648 used machines on RESALE, but how to find them? Machine Search
Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm
REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).
Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg
Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI
WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle / ...
Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm
Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)
Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg
0: 4 St. 0: 120 mm Feed speed: stufenlos, 3-18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 3 St. 0: 80 mm Feed speed: (4 Stufen): 4/8/9/18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...
Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000
Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA
Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall ...
Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.
TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004
Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options
Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details.
Spindle moulder with fixed spindle, table with extensions Table length: 2,50 m. Support rail in the front Spindle diameter: 50 mm Motor 5,5 kW Spindle speed, manual adjustment, 4000/6000/8000 r/min
height of spindle adaptable: by hand spindle diameter: 35 mm motor: 3/4 kW
Milling spindle diameter: 50mm Useful span: 240mm Milling spindle speeds: 4400/6400/7000/9400 tr/min Motor: 7.5 kW Table dimensions: 1100 x 800mm Max milling diameter: 220mm Extension table: 200x1000mm + 200x2000mm Attachments: 2pcs 145x500mm Dust extraction diameter: 150mm
Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation
Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.
Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg
Table: 825 x 1140 mm Extendable workpiece support Spindle diameter: 50 mm Spindle length: 210 mm Vertical spindle travel: 190 mm Maximum profiling tool diameter: 200 mm Maximum tenoning tool diameter: 320 mm Motor 5.5 kW Incl. side-mounted tenoning carriage 5 speeds: 3500 - 6500 - 8000 - 10000 rpm
Tilting spindle model, -45° – 45° 5.5 kW motor, 1500/3000/4500/6000/9000 rpm Usefull spindle length: 180 mm Motorised height and angle adjustment with digital display Spindle diameter 50 mm Aigner guide Tornado feeder with 4 wheels
Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Variable speed 5 - 22 m/min Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood
Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm
Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)
Code: 0505 Brand: SCM Model: 150 - CE Standard Automatic spindle moulder with tilting spindle, with numerical control programmer (3 controlled axis) for joinery, furniture, bespoke furnishings, wooden joinery, doors, panels, plastics, composite materials and various other applications – CE Standard Technical data: Electronic programmer with 3 controlled axis (spindle lifting – spindle tiltimg – spindle guide) allowing up to 98 programmes to be stored and executed automatically Spindle diameter mm 35 Spindle tilting -10° to +45° Spindle speed rpm 3000/4500/6000/7000/10000 Motor power Hp 7,5 Table length mm 2600 Max spindle projection mm 215 Work surface height from ground mm 920 N° 2 dust extraction inlets diameter mm 120 Equipped with Maggi 4-roller automatic feeder Maggi with variable speed control Overall dimensions mm 2600 x 1300 x 1800 h Weight kg ...
Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed
Type 1B/1K-M length of workpiece. 5000 mm workpiece width. 300 mm Quontity of mortising: 180 mm working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 7500 Eur (EXW Jonava, Lithuania)
TECHNICAL DATA: Vertical milling machine Tool shank diameter mm: 35 Dimensions of the work table mm: 2400 extendable in width 4 speeds, self-braking Installed capacity KW: 5,5
SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment
SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories
Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left
SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools
SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools
SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools
- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder
SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.
HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg
SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)
Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave
SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998
Table dimensions: 680 x 1.000 mm Motor output: 4 kW Spindle diameter: 30 mm reus: 3.000/4.500/6.000/8.000 U/min : 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
