long lathe used for sale

CNC carousel lathe FKD 30, Siemens 840 dsl, machining range-diameter 3500, working height 3000mm, workpiece weight max. 25 tons, driven tools speed 0-3000 rpm, faceplatespeed 0 - 150 rpm, pickup station 5 places. Manufactured in the EU Remarks: 2columns carousel lathe with traversing cross beams, 1 piece ram for rotating and milling (ram 300mm x 300mm) with driven tools, ISO 50 C axis with master-slave bracing Filter system 3000 liters incl. high pressure pump 25 bar 3 chip conveyors

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Lace high 400 mm Drehlange 700 mm, hydraul. Tailstock more info on request

Distance between centers: 3000mm. Swing: 600mm. Swing over carriage: 360mm. Swing over gap: 780mm. Spindle: 72mm. 18 speeds (16-1250rpm)

Distance between centers: 2000mm. Swing: 600mm. Swing over carriage: 360mm. Swing over gap: 780mm. Spindle: 72mm. 18 speeds (16-1250rpm). Equipped with chuck.

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

Screw-cutter Lathe Ryazan 1M63(Russia), 1981, work piece maximum diameter above bed 630 mm; work piece maximum length 2800 mm. price 5200 EUR.

CNC lathe Webo Roeperwerk in single parts! Machine coerper no longer available! Only spare parts / parts according to the description below. Type Weboturn 400 Control Siemens System 3T ( CNC 3T) items can be shipped, e.g. - Spindle verstaerker - Achsverstaerker, - CNC control, boards etc. - Monitor No longer available: 1. Main spindle with spindle stick 2. Riding stock 3. Ball roller spindle of the x-axis All photos of the machine, control and the boards can be requested on request. The price of the additional information refers to the main spindle motor with Achsverstaerker as described above. Special price

Accessories: Coolant system Digital display HEIDENHAIN Tip height 200 mm Top width 1000 mm Speed 36-1600 rpm Umlauf-Ã? on cross slide 230 mm Spindle hole 52 mm Spindle support 6 "camlock Reitstock Quill Ã? 58 mm Tailstock spindle mount MT 4

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Rotary and thread cutting machine EBOSA M34 - see pictures

Lathe VDF / Boehringer, peak width 1000 mm, control has been converted to Siemens

Accessories available. Peak height 125 mm Tip width 500 mm Circulation diameter over bed 250 mm Circulation diameter via flat slide 140 mm Spindle head size 4 Inner cone similarly shortened MK 5 Spindle bore 38 mm Speed 3000 rpm. Bed slide path 450 mm Plan slide path 120 mm Upper slide path 82 mm Inner cone Reitstockpinole DIN 228 MK 3 Pinole stroke 80 mm Feed diameter 125 mm Collet passage max. 28 mm Flat slide diameter max. 200 mm Guide diameter fixed set stick 10 - 60 mm guide diameter. Seedstick 10 - 50 mm Workpiece weight incl. clamping equipment max 40 kg Space requirement L x W x H approx. 1300 x 700 x 1400 mm Weight approx. 650 kg

see images and PDF immediately available

see images and PDF now available

Vertical turret lathe FKD 40 CNC with Y-axis and CNC Rotary milling head (A-axis) Faceplate diameter 4000 mm Turning diameter: 8000 mm Turning height: 3000 mm Slide cross section: 300 mm x 300 mm Stroke: 3000mm X-axis: travel 5000 mm Z axis: travel 2000 mm Y-axis: travel 6000 mm W-axis: stroke 1500 mm C-axis in face plate table A-axis milling head Control: Siemens 840 DSL Tool changers: 60 seats PickUp station: 5 places

CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

turning diameter: 660 mm turning length: 2000 mm control: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

LATHE MORANDO Manufacturer: ITALY Year of manufacture: 1970 Swing over bed 1200mm Turning length: 8 000mm

LATHE PONTIGLIA Leopoldo Manufacturer: ITALY YOM 1980 NEW ELECTRIC 2010 ( cabling, main motor drive, X Axis Servomotor) Chuck diameter 1200 mm Diameter in Gap 2000 mm X 1500 mm ( MOVING BED) Swing over bed 1250 mm Lenght 6 000mm / 9 000 mm machine weight 21 000 kg

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Condition: very good mechanical parts Technical details: Turning diameter 3200 mm Table diameter 3200 mm Turning height 2000 mm Max workpiece weight 50 t Table speeds 0.66-62.1 rpm Crossrail vertical movement 1870 mm Main motor power 125 kW Machine dimensions 5100 x 9200 x 7200 mm Machine weight 90.4 t

Horizontal Lathe POREBA TCA 160 x 12 m Condition: very good, complete Technical details: Max. swing over bed 1600 mm Max. swing over carriage 1280 mm Max. swing over gap 1600 mm Turning length (between centers) 12000 mm spindle turning speed (min) 0.85 rpm spindle turning speed (max) 170 rpm The width of guide way 1100 mm Dia. of spindle bore 105 mm Taper of center sleeve 120/80 Feeds: bed slide/longitudinal 0,19-5, 0 mm/1 spindle rotation Feeds cross slide 0,095-2, 5 mm/1 spindle rotation Rapid travel-longitudinal/face 4000 mm/min Max work piece weight centre this centre 30000kg Max work piece weight with 2 steady rest 40000kg Faceplate diameter 1600 mm Metric thread 35 strokes-1-50 mm Whitworth thread 35 strokes-24-1/2 " Module thread Diametrical pitch thread Section of tool shank 70x70mm Travel of the top slide 0,095-2, 5 mm/1 spindle rotation Max.travel o ...

Vertical Lathe WMW NILES DMF 6300 Condition: Very good, complete Technical details: Turning diameter: 6300 mm Turning diameter, with side-support: 6000 mm Degrees displacement of the vert. supports: +/-30 ° Displacement of the side-support: 1800 mm Workpiece height max. : 2500 mm Workpieceweight max. : 50000 kg Chuck diameter: 5300 mm Speedrange: 0.35-14 rpm Feeding speeds (16): 0.063-11.2 mm/omw. Rapid speed of the supports: 1000 mm/min ¬ ¹ Rapid speed of the side-support: 500 mm/min ¬ ¹ Connection power: 120 kW Dimensions of the machine W: 14.40 x 8.20 x 8.70 m Weight of the machine ca.: 174.000 kg

Lathe brand KERN

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg

The photo shows the commissioning at our customer in Turkey. Other machines with a flatdisc diameter of 3000mm to 6000mm are available at short notice.

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 250 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: On work bench: Working bench: Length: 1600 mm Width: 700 mm Height: 850 mm Rear drive: SIMONET Headstock with reduction gear Driving plate Set of collets: W20

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 190 mm Distance between centres: 750 mm Swing over cross-slide: 240 mm Swing over bed: 390 mm Swing in gap: 580 mm Spindle hole: 54 mm Taper in spindelstock MK: 4 Taper in spindle: Camlock: 6" D1 Spindle speeds: number (steps): 16 from: 25 rpm up to: 2000 rpm Taper in tailstock:: 4 MT Spindle stroke: 155 mm Feeds: length: from: 0.04 mm/r up to: 1 mm/r Frontal: from: 0.02 mm/r up to: 0.5 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 1170 kg Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 1500 mm Various accessories: Digital readout number of axis: Manufacturer: HEIDENHAIN Face plate diameter: 380 mm 3-jaw chuck diameter: 200 mm Set of jaws hard Set of jaws Coolant system Quick closing attachment Chuck adaptor Fixed s ...

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm