loma systems used for sale

8 up Thermal Manufacturer: Screen Model: 8600 s (Agfa Avalon N8 22) year: 2010 with cleanout unit and stacker Price: on request

Specifications: - Boom length approx. 6 m - 5 joints - Suction pipe diameter 125 mm - Wall connection – console - Weight approx. 100 kg

Guntner condensator 150kW GVHX080,1B/2x1-MD.E 1200Eur Guntner condensator 32kW GVHX 050.1A/1-ND.E - 400Eur Guntner condensator 17kW GVHX 045.1A/1-LW.E - 200Eur DT15K VERY GOOD CONDITION!

System for the extraction of exhaust air from electroplating tanks and purification of the exhaust air by means of a washing process; Centrifugal fan, motor 15 kW, 1452 RPM

Thermal CTP Agfa Xcalibur E Year: 2004 in production with Transporttable Transfer table Processor Agfa Elantrix Workflow Apogee V.7.1 Price: on request

Sprematec baking system BASE CONE 212 / 69 / 16 for roll production - Condition: Demonstration system - Number of baking plates: 69 pieces - Baking plate size: 212 mm - Product size: D= 20 x 48 mm - incl. succession line

8-up Thermal CTP Heidelberg Topsetter 102 Year: 2000 Exposure time: 22097h Plate winding cycles: 46324 Diodes in very good condition Plate size max: 940x1160 mm Plate size min: 650 x 550 mm Exposure resolution: Full HD 4k Speed: 50 plates/h Power consumption: 200/230V 7.5A 50/60Hz Price: on request

Fritsch Filler for pastry lines (Euroline) Stainless steel 6 rows with air compressor connection

Fortuna Head Machine Type: KM5 5 rows Weight range: 35-80 grams Hourly output: max. 5500 pieces With flour spreader cut + round off analog control can also be synchronized with a proofing cabinet 400V 50Hz Height: 170cm Width: 200cm Depth: 100cm

with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...

4 up Violet CTP CTP FUJI V6 Full automatic with feeder for 3 formats plates, in-line die-cutting, Glunz&Jensenn imager and stacker B2 format in perfect technical and visual condition Price: on request

4 up Thermal Agfa Acento E Year 2005 With Harlequin Rip Price: on request

Packaging line consisting of: 1 4-chamber VA silo with bucket elevator, 1 multi-head scale MESOMA combinat 14S, type MD300/ME400, No. 11.02.-069, year of construction 1996, 1 flow wrapping machine MESOMA MD300, , 1 metal detector CINTEX,1 checkweigher OCS Ec, No. 1002883, year of construction 2005, with conveyor belt and dispenser, No. 11825/11208804, year of construction 2011, 1 packaging machine JP KV400, No. 362/2005, with control panel SIEMENS Simatic panel, 1 labelling and carton closure system COMARME gema 470, No. AZ026245, year of construction 2005 with labeller BLOHME Advanced.01, No. 10388, 1 carton folding machine BEDO VA 985, No. 985.1.52496, year of construction 1997

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

4 up thermal CTP AGFA Avalon N4 year 2014 32 diodes with AGFA Apogee RIP Price on request

8 up Thermal CTP Avalon N16–50 XT Punch system Bacher 780 Avalon N16 May 2012 Life time plates 343123 p Lifetime running 24921 h Actual running time 13276 h Exposure time 5885 h LD Status Reserve (U) 77 Current (U) 25 Reserve (L) 67 Current (L) 25 GLV replaced in may 2022 Price: on request

Used bread roll system KÖNIG, Type: Laurin 1000 / Futura -In bakery condition- Versatile for round rolls or Berliners, shaped pastries, such as Kaiser and long rolled products. Wound products, such as salt sticks, croissants or Kornspitz with additional winding unit possible. - 2-row head machine Futura with active drum SKG51 and AKG70 - Cross input tape - Fermentation chamber and forming station Laurin 1000 - Mehler - Punching - Tool unit - Punch flourer - Settling device for automatic settling on sheet metal - Sheet metal input for 2 sheets - Sheet metal output for 2 sheets - Control switch - Display Universal, versatile small pastry system for round, spotted, long-rolled and sliced (pressed) dough pieces. Can also be combined with a winder via the side discharge. The facility is in good condition. Viewing and test run are possible by arrangement. Overhaul poss ...

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

Manufacturer: Heidelberg Model: Topsetter 102 Modules: -Topsetter P/PF 102 MCL -Multi Cassette Loader P/PF 102 -Topsetter P/PF 102 Recorder -Transporttable advand MDT 48C -InterPlater 135 HD/HDN/Thermal Exposure time/ runnung time: 34936 hours Plate winding cycles: 76313 Price: on request

Process air cooler / chiller / chiller, air-cooled, Type: TAEevo Tech 1002 P3 MTA S.p.A. TAEevo Tech 1002 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 99 Max. current (A) 167 Starting current circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Connection Victaulic DN 100 Serial  ...

Weishaupt Monarch WM-G10/2-A ZM Burner Scope Weishaupt gas and dual-fuel burners WM10 are suitable for intermittent operation and continuous operation on: • Heat generators according to EN 303 • Hot water systems • Hot water systems •Boiler • Hot air generators • Certain process plants Weishaupt oil, gas and dual-fuel burners of the WM10 series are equipped with electronic interconnection and digital combustion management as standard. Modern combustion technologies in particular require precise and always reproducible dosing of fuel and combustion air. This is the only way to ensure optimum combustion values over a long period of time. Key Benefits • The digital combustion management makes the handling of the burner comfortable and safe. • No additional burner control is required, as the control is taken over by the combustion manager. • Less time i ...

Extraction and filter system Nestro 9/4/20 with chip container YOC ca. 2005 Filter area 156 m² Hoses 2 m long, 108 pieces, diameter 220 mm Total air volume approx. 20,000 m³/h Suction fans 1. Fan 16 kW 350 mm approx. 9,000 m3/h 2. Fan 11 kW 350 mm approx. 6,000 m3/h 3. Fan 7.5 kW 250 mm approx. 4,000 m3/h Return air duct with summer/winter flaps Cleaning electromechanically 3 motors each 0.66 kW Rotary valve 0.37 kW 3860 mm Transport fan to container 4 kW Control of the system with electrical plans External dimensions approx. L x W x H 4000 x 24200 x 5000 mm Weight 6,000 kg Container for chips L x W x H 4500 x 1900 x 2100 mm Weight approx. 2,000 kg The extraction system is still in operation and will be replaced by a larger system in January 2024 The facility is fully operational and will be available at the end of January 2024 The system can be disassembled i ...

Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Industrial cooler , Operating overpressure 18 bar , Filling weight 2 kg , 230 V , 8.62 A , 1.65 kW , 50 Hz , Refrigerant R 134 a

Industrial cooling system , Cooling capacity 3000 kcal/h , 24 bar ,380 V , 50 Hz , 4,9 A , 2,5 kW

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Heat pump / chiller air-cooled, Type: Taurus TECH HTAT 040 HE MTA S.p.A. Heat pump / chiller Taurus TECH HTAT 040 HE (reversible) with hydronic kit, storage tank + pump P15 + fairing hydraulics. Heating capacity kW 99.3 Cold water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 17.2 Available pump pressure bar 0.966 Ambient temperature +7 °C Cooling capacity kW 84.5 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 14.4 Available pump pressure bar 1.24 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 47 Max. current (A) 79 Starting current circuit (A) 263 Protection class: IP54 Dimensions: Length mm 2510, Width mm 1110, Height mm 2270 Weight kg 1113 Connection Rp 2" Serial No.: 2200392018 Year of construction 2022 Condition: Optical 1, Technically ok (Stock  ...

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Air cooler / process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3 M.T.A. S.p.A. TAEevo Tech 602P3 are compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr. And built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature 32 °C, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 60.99 Max. current (A) 102,78 Starting current circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, Width mm 1255, Height mm 2119, Weight kg 1773 Connection Rp 2" 1/2 Serial No.: 2200371189 Year of const ...

Min size 10x10 mm Max size 260 x 280 mm Banding device In/line Busch BD30 Automatic banding device Min banding sizes 25 x 60 mm Max banding size 140 x 200 mm Speed 14 cycles per minute - 840.000 sheets per hour Banding width 20/30/40 mm Banding materials PE-foil Details operated by light curtain, once the operator pulls away their hands the machine will make a cycle, PLC diagnostics display readout for BD30 condition excellent Unit BD30 all pneumatic revised until leak free after order a few more things will be performed Available failry soon after order

I am selling the Colombo Angelo Figli AM33/AF window angle system. Year of construction 2005. Pin side saw + 620mm spindle fully servomotor. Roll forming side 3 spindle + strip cutting unit fully servomotor. Milling heads VYDONA WOOD EU78-92, wood-aluminum 92 everything programmed into the machine and included / possible to bill if not accepted. Combined power 50KW Weight 6000kg. Compact size, cheap also for small workshops. Available right in stock. Condition very good. Complete system with tools / possible to bill if not accepted. Please contact us for more photos and info.

Bitzer compressor unit Type: 3 x HSK 8571-140-40P Volume: 3 x 410 m3 Cooling capacity for R404A: 860 kW at -5°C/40°C, 705 kW at -10°C/40°C Cooling capacity for R134A: 540 kW at -5°C/40°C, 440 kW at -10°C/40°C Dimensions: 4100 x 1400 x 2500 mm Reference number: Z25 Pieces in stock: 1 Condition: Used

BAQUETTE MACHINE

Process chiller / chiller water-cooled, Type: Aquarius G2 - AQG2 1401, Green Refrigerant R513A, MTA S.p.A. The Aquarius G - AQG2 1401, 2601 are water/water chillers for indoor installation. Shell-and-tube evaporators, Bitzer screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 351 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.2 Cooling water temp. Exit/Entry (°C): 35 / 30 Volume flow (m³/h): 73 Refrigeration circuit: Refrigerant R 513A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 128 Max. current (A): 209 Starting Current Circuit (A): 341 Protection class: IP54 Dimensions: Length (mm) ...

Bitzer compressor unit Type: 3 x HSN 7471-75-40P, 1 x HSK 7471-90-40P Volume: 4 x 250m Cooling capacity for compressor unit HSN (X3) R404A: 480 kW at -10°C/40°C, 360 kW at -20°C/40°C Cooling capacity for HSK7471(R404A): 145 kW at -10°C/40°C, 93 kW at -20°C/40°C Cooling capacity for HSN7471(R404A): 160 kW at -10°C/40°C, 120 kW at -20°C/40°C Dimensions: 5000 x 1500 x 2100 mm Reference number: Z26 Pieces in stock: 1 Condition: Used

Process chiller / chiller water-cooled, Type: AQUARIUS PLUS 2 – AQP2 2601 MTA S.p.A. The Phönix AQUARIUS PLUS 2 – AQP2 2601 are water-to-water chillers for indoor installation. Shell-and-tube evaporators, Handbell screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 654 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 112 Cooling water temp. Exit/Entry (°C): 35 / 30 Flow rate (m³/h): 134 Refrigeration circuit: Refrigerant R 134A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 215.03 Max. current (A): 356.88 Starting Current Circuit (A): 602 Protection class: IP54 Dimensions: Length (mm): 432 ...

KG dosing unit, Fabr. Schenk, Type: DA100, in stainless steel, with agitator with engine Bauer on top, standing on mobile feet

Complete AKE band sawmill consisting of: Main machine list Log manipulation RR 700 Feeding for debarking Debarking - Cambio (sold) Reducers Feeding saw line First band saw - make: AKE (vertical) Second band saw - make: AKE (horizontal) Hacker Cross-cut saw Two cutting saws - make: JONSERED Lamellar saw make: WACO Model 130 Special Hydraulic equipment Pneumatic equipment Suction Control system Spare parts inventory Round wood L = 1800 - 4500 Diameter = 100 - 1000mm Board thickness = 16 - 100mm Capacity approx. 40,000 m3 of round timber / year in 2-shift operation with an average round timber diameter of 30 cm The system was installed after a fire damage in 1998 and produced until 2004/2005. Until 2008 only limited use. In 2013, the system was professionally dismantled with extensive documentation to ensure easy installation at the new location. Technicians f ...

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Grocer Suction stand filter Suction nozzle diameter 180mm Chip bag diameter 500mm 16 filter bags Filter bag diameter 200mm Filter bag height 1450mm Abhalation by hand W= 1100 mm L= 1100mm H = 2600mm G&-4983-F9793

Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Broma Milk Roll Pusher Milchweck / dough piece pusher for manual assignment / one-man operation Pressure setting adjustable long discharge belt Tabletop unit DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty

Turntable for seeds Fortuna DT Stainless steel Shelf below for seed plates Wired mobile Connection 400V, 1 kW, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center!

Agfa CTP with developer format 103x77, 64 diods, year 2008

CNC Plasma Cutting Machine Manufacturer: Messer Type: Metalmaster 3015 CNC control: Global Control S Year of construction: 2011 Retrofit 2019 Working range: 1,500 x 3,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i

- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP