loma systems used for sale

Full gate Esterer SS45 was generalueberholt Pass 450 mm 340 upm 500 Hub with complete hanging, saegen blaetters and Templates with hydraulic roller lifting with wedge wedge with drive power 30 kW with hydraulic unit with complete control cabinet

CS Instruments Leaking detector for comprressed Air systems controling. Unused in Suitcase.

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

Lippelt Rustica Mini angular bun -with 3 cutting rollers -with humidification and seed sprinkle -Year of construction 2000

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

Composite plant VPM355-4830 / 3604959 with condenser for freezing with 3 compressors: 4TCS-8.2Y-40P Compressors each have 8hp Built: 2006

Composite plant VPP350-4860 / 3604957 with condenser with 3 compressors: 4PCS-15.2Y-40P Compressors each have 15hp Built: 2006

Machine complete with PC, RIP, etc.

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller  ...

Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.

FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...

Haas TRO 140G Price: 110,000 € Machine No: 18767 Built: Number of baking tongs 140 , 2 baking places per pliers Upper engraving without Underengraving 5 x 5 mm Rand yes Tool 22°30' Power consumption: approx. 2.5 kw/h Gas consumption: approx. 24 m3/h Location: Germany The machine is used for the production of sweet, twisted squirrels with standard industrial size and flattop. Winders, conveyor belt, ready-to-wearer, metal detector and stacking table are included. The machine is in a well-maintained condition. The machine is currently stored. Haas, GAM, Steinhoff, Walter, Industry

Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

Waffle Cup Making Machine There are 4 different machines available, for different cup dimensions. Model: BM-260 - Mocaccino Model: ВМ-200 - Latte/Cauccino Model: ВМ-120 - Americano Model: ВМ-80 - Espresso Steps for production: - Preparation of the dough for the waffle cups - Production of the wafer cups on a cup production line - Preparation of the chocolate mass (melting of the chocolate briquettes/drops and tempering) - Pour the chocolate into the cup and turn the cup over so that the chocolate residue runs out of the cup - Cooling of the cups of chocolate on the work tables - Packaging of finished products in bags Technical data: - Number of molds per matrix: 32 pieces - Volume cup : 80 / 120 / 200 / 260 ml - Capacity: 320 - 480 cups per hour - El. Power: 18 kW - Weight: 655 kg - Dimensions: (L х W х H): 1,080 x 800 x 1,440 mm

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

Temperature control device Manufacturer: gwk Type: teco cs 90 N°: 11936 Y.O.M.: 2002 Heating capacity: 9 kW Rated cooling capacity: 23 kW Maximum temperature circulating medium: 95° C LWH: 900 x 260 x 600 mm

Schmalz Vacuum Tube Lifter JumboErgo 140-90° with Column Slewing Crane Technical data: • Vacuum tube lifter JumboErgo 140-90° (load capacity 120 kg) with column slewing crane for handling wooden panels: o Room height => 5,000 mm o Lower edge of crane boom = 3,500 mm o Crane height = 4,270 mm • JumboErgo design: 90° swivel • Double suction cup with sliding suction cups for swivel unit • Column slewing crane for Jumbo tube lifter Available from: immediately Terms of delivery: ex site – EXW Potsdam Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial  ...

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48 700 watts new condition with operating instructions LWH: 1600 x 600 x 1400 mm

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm)  ...

Refrigeration unit, refrigeration system, refrigeration system, cooling compressor, refrigeration compressor used. TEKO TPX2-112 Built in 2011 compressor 2 pieces FRASCOLD Type: S 7 56 Y 56 m3/h each 380 V Dimensions approx. 1600 x 900 x 2000 mm All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...

Cooling & freezing chamber NN 2900x2200x2500 Type Cooling equipment Height 2500 Width 2200 mm Length 2900 mm

Temperature control units Manufacturer: gwk Model: teco wv Machine no: 1) S001 2) S010 3) S030 4) 567 good condition with operating instructions Control via touchpad LWH: 1300 x 320 x 950 mm 4 pieces available

Temperature control unit Manufacturer: gwk Model: teco wv good condition with operating instructions Touch panel LWH: 1100 x 330 x 750 mm

Temperature control unit Manufacturer: Lauda Type: LTH140P No.: X12217 Power: 7 kW Filling volume: 5 l Year of construction: 1999 with operating instructions

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine