loma systems used for sale

Includes multiple Sandvik Coromant holders (CoroCut, CoroTurn, T-Max) Auction-ID: A7-46756-217

For about 130 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-22

In stock on 5 pallets: 1st pallet: rail connector for Single Rail 36, accessory for trapezoidal sheet metal substructure. 2. Pallet: End caps suitable for Single Rail 36 and Omega Cable Clip. 3. Pallet: Roof hook, 4S cross-hook suitable for Single Rail 36. 4. Pallet: Lightning protection clamps and matrix switcher connectors (climbers). 5. Pallet: Croos-Hook 2 Set, roof hook for Tegalit roof tiles. Auction-ID: A1-46700-19

Consisting of: SpeedPorter for ballast mounting, DomePeaks for elevation and middle and end clamps. Auction-ID: A1-46700-26

For substructure in east-west orientation with 10 degrees inclination with a length of 2.45m. Consisting of: end and center clamps, Dome Peak for elevation, Dome and SpeedPorter for ballast distribution, connectors and replacement building protection mats. Auction-ID: A1-46700-25

For about 150 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-24

Consisting of: center and end terminals, lightning protection terminals, connectors and matrix switcher connectors. All items compatible. Auction-ID: A1-46700-29

consisting of six HAINBUCH collets type: SK100BZG diameter: 145 mm and two HAINBUCH clamping systems Reference: Hercegfi - Lot 65 Weight: approx. 70kg Auction-ID: A7-46763-230

In 3.3m and 3.65m versions. Consisting of: middle and end terminals, lightning protection, single hook 4S, matrix switcher connectors, black cover, end caps, insert nuts, connectors, aluminum underlays 4mm and plastic underlays. All items compatible - > number does not match. Auction-ID: A1-46700-28

Consisting of approximately 40x box with various dimensions, unused, + cardboard with castors, on middle shelf rack Auction-ID: A1-46604-305

For about 160 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-23

14x complete sets and 10x flexible tube. Flat design enables the substructure of PV systems. Auction-ID: A1-46700-33

Belt width gross: 1060 mm, Description: Stainless steel floor, central lubrication system, Belt width nett: 1015 mm, Tiers: 40 pcs., Link height: 80 mm, Product gap: 65 mm, Belt length: 820 m, Max belt load: 18 kg/m2, Infeed height: 925 mm, Outfeed height: 4500 mm, Refrigerant: nh3, ammonia, Cooling power: 400 kW, Evaporator surface: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 13050 x 9450 x 5300 mm

Belt width gross: 1060 mm, Belt width nett: 1015 mm, Tiers: 36 pcs., Product gap: 65 mm, Link height: 80 mm, Belt length: 738 m, Infeed height: 925 mm, Outfeed height: 4120 mm, Refrigerant: NH3/Ammonia, Cooling power: 640 kW, Evaporator: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 11020 x 8300 x 5100 mm

Without compressors and insulated panels, Belt width: 1850 mm, Belt length: 18300 mm, Product gap: 85 mm, Refrigerant: NH3, R717, ammonia, Cooling power: 224 kW, Evaporator: 3 pcs. Raffel, 2266 m², Power: 3 x 400V, 50Hz, 55kW, Dimensions: 19800 x 3580 x 3450 mm

Refrigerant: R404A, Compressor: Danfoss Optyma, Power: 3 x 400V, 50Hz, 3.9kW, Dimensions: 800 x 1200 x 1500 mm

Refrigerant: NH3, R717, Compressor: GEA Grasso PR-P55S-28, Flow rate: 966 m3/h, Working pressure: max 21 Bar, Power: 3 x 380V, 60Hz, 162kW, Dimensions: 5000 x 2200 x 2450 mm, Weight: 5400 kg

Belt width: 710 mm, Length: 16000 mm, Refrigerant: N2 (liquid nitrogen), Power: 3 x 400 x 50Hz, 8kW, Dimensions: 17600 x 1500 x 2300 mm

Belt width gross: 965 mm, Belt width net: 905 mm, Belt length: 737 m, Belt surface: 600 m2, Tiers: 37.5 pcs., Product gap: 55 mm, Capacity: 2300 kg/hr (ready meals), Infeed height: 900 mm, Infeed length: 2640 mm, Outfeed height: 6300 mm, Refrigerant: R717, ammonia, Cooling power: 325 kW, Power: 3 x 400V, 50Hz, 67kW, Dimensions: 13840 x 7800 x 7300 mm

Belt width gross: 920 mm, Description: Descending spiral, infeed at the top, outfeed at the bottom, Belt width nett: 880 mm, Tiers: 23 pcs., Link height: 80 mm, Product gap: 65 mm, Length per tier: 17.8 m, Belt length: 409 m, Refrigerant: NH3, ammonia, Evaporator size: 1800 m2, 975 L, Cooling power: 250 kW, Power: 3 x 400V, 50Hz, 64 kW

Belt width gross: 760 mm, Belt width nett: 715 mm, Tiers: 43 pcs., Product gap: 105 mm, Link height: 120 mm, Belt length: 563 m, Infeed height: 6000 mm, Outfeed height: 740 mm, Refrigerant: R717/NH3/ammonia, Evaporator: 3100 m2, Cooling power: max. 496 kW, Power: 3 x 400V, 50Hz, 38,5kW, Dimensions: 8850 x 4800 x 7000 mm

Working volume approx. 6000L, equipped with steel walkway approximately 3500 mm long, 4 tanks are connected to each other by 2 steel tubes Auction-ID: A1-45771-12

Capacity approx. 2000 liters; v.v. 'Pedrello centrifugal pump; Auction-ID: A1-45771-36

Consisting of 4x stainless steel brew kettle total capacity 4400 L; usable capacity 3000 L; size of brewing tank approx. Ø 1900x3500 mm; of which 2x tank with agitator; Stainless steel platform (2000 mm high) with stairs; 2x stainless steel pump units; 1x Seepex funnel pump; Siemens Simatec control console with touchscreen; heat exchanger (2018); stainless steel sink and cabinet included, Year of installation 2023 Auction-ID: A1-45771-1

-Model : Thermal platesetter KODAK CREO LOTEM 800 II QUANTUM S YEAR 2009 -Totally refurbished from Kodak in 2013 -Software version 3.82.12 -Autoloader with 1 cassette of 50 plates capacity , Internal punching system -Approx 13.000 plates done , speed 19 plates per/hour -Included : RIP Creo Prinergy installed with 2 computers and monitors -Stacker Egraftech year 2013 -Plate size: max 1130x900 mms. -Resolution: up to 2540 dpi -Available immediately , complete with all accessories, in good conditions

Has served as a storage for refrigerant; equipped with 2x centrifugal pump Auction-ID: A1-45771-37

Professional supermarket machine, version: standing model, suitable for PET bottles, small packages and crates, 10.1-inch screen, \"Tomra\" transport installation with sorting; Please note! Installation must be disassembled by the buyer Auction-ID: A1-40112-68

Working volume 250L Auction-ID: A1-45771-10

Working volume 4000L; equipped with steel walkway 1000x9000 mm; tanks are connected to each other by a stainless steel profile; This is sawn through by our external partner. Auction-ID: A1-45771-4

Working volume 4000L; equipped with steel walkway 1000x9000 mm; tanks are connected to each other by a stainless steel profile; This is sawn through by our external partner. Auction-ID: A1-45771-3

Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough  ...

Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right

Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.

Manufacturer: Fraunhofer Model: HEIS Laser 1 Year of manufacture: 2023 Status: Fully operational CE certified: Yes Technical Specifications - Supply voltage: 3 x 400 VAC / 50 Hz - Fuse protection: 3 x 50 A - Rated current: 50 A - Laser wavelength: 9 to 12 micrometers - Laser average rated power: 450 W Hardware Components Included - Beckhoff control PC - Philips monitor - Laser source OEM 45 IX - Water-air cooler and cooling water system - Scanner IntelliSCAN 20 with VarioSCAN 40 - Beam guidance system - Air conditioning system - Cooling water system - Control panel Peripheral Equipment Included - ULT extraction and filter unit - Riedel Kooling chiller unit, Find more here - / Contact us at -

Manufacturer: Baublys Model: BL5000 G30 Sy / NC303030 Year of manufacture: 2020 Status: Fully operational CE certified: Yes Laser Specifications - Laser type: CO2 laser - Average laser power: 30 W - Laser class: 4 - Wavelength: 10.6 micrometers Technical Specifications - Operating voltage: 400 V / 50 Hz - Max. power consumption: 2.8 kVA - Fuse protection: 16 A - Connection: 5-pin CEE plug - Machine dimensions: 860 x 1,493 x 1,777 mm - Machine weight: approx. 465 kg Workpiece Capacity - Max. workpiece height: 300 mm - Working table size: 550 x 375 mm - Max. workpiece weight: 75 kg Find more here - / Contact us at -

Automatic double sanding system for battery boxes, each identical to the Kuka robot, wood and parts sanding device, housing, with roller infeed and outfeed, year of manufacture 2023

TECHNICAL DATA: 02 Motors: TX3 – 3 axles, equipped with HSK63E mount – chain magazine with 46 places TX5 – 5 axes (C ±270°, W ±120°), equipped with HSK63F mount – magazine with 24 slots Machinable workpiece length: max. 7000 mm Wood cross-section: max. 300 mm Machinable workpiece thickness: from 20 to 95 mm Loading buffer with 2 stations – simultaneous processing of 2 workpieces Videojet Laser Marking Liquid cooling for the spindles

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Parameter Value Model Name Herkules 450/10/50 Type Piston Air Compressor Tank Capacity 50 litres Max. Operating Pressure 10 bar Motor Power 2.2 kW / ~3 HP Voltage 230 V AC Frequency 50 Hz Engine Speed 2800 rpm Air Intake Capacity 400 L/min Air Delivery (Effective) 320 L/min Noise Level 95?97 dB Number of Cylinders 2 (twin cylinder) Lubrication Oil-lubricated system Typical Uses Home workshop, tire inflation, air tools, painting

Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg

() is equipped with an insulated - and is ideal for industrial cooling processes. It has two powerful fans and integrated piping and controls. The coolant is glycol, and the refrigerant used is R-410A. The system offers a cooling capacity of 14 kW at an . () . (). The 5.5 kW electric motor operates at 380–415 V, 50 Hz, and 20 A current consumption. This compact unit enables efficient, reliable cooling in industrial processes. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: externally mounted cooling unit with glycol buffer storage tank, Cooling capacity: 14 kW, Pressure compressed: 4,2 bar, Pressure relaxed: 1,9 bar, Gross volume glycol buffer tank: 400 l, Power: 5,5 kW, Current: 20 A, Voltage: 380-415 V, Frequency: 50 Hz, Features: Cooling unit with 2 fans, glycol storage tank, piping, control system

Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output., Additional title: ice water generator, Cooling capacitry: 14 kW, Power: 6,2 kW, Length: 1600 mm, Width: 1600 mm, Height: 1800 mm, Position: free standing, Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes, Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump

NH3 refrigeration system for cooling glycol and brewing water, consisting of the following components: - NH3 separator brewing water 890 l (T0 = -0.5°C) - NH3 separator glycol 647 l (T0 = -6 °C) - 3 x piston compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water cooler Q0 = 200 kW - Evaporation condenser - Water tank approx. 470 hl - Glycol tank 80 hl + 2 x glycol pump - Plate heat exchanger as glycol cooler Q0 = 100 kW - High pressure collecting vessel 830 l - Danfoss frequency inverter type VLT HVAC, Additional title: NH3 Cooling plant, Cooling capacity Q0 brew water: 200 kW, Cooling capacity Q0 glycol: 100 kW, Evapotation temperature t0 brew water cooling: 0 °C, Evaporation temperature t0 glycol cooling: -6 °C, Current: 185 A / 250 A, Features: 2 x NH3 separators (t0 = -0.5 °C; t0 = -6 °C); 3 x piston compressors; 2 x brewing water pumps ...