loma systems used for sale

Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz

Loma Systems metal detector, model: IQ³, serial number: MD307-13249D, year of construction: 2010, 85-265 V, 50-60 Hz, clearance: 450 mm x 270 mm, plastic belt, belt width: 400 mm, total dimensions: 1500 mm x 1100 mm x 1250 mm.

This is a LOMA Systems IQ-series industrial metal detector, commonly used in food and dairy processing lines. Here’s a clear, practical breakdown of what it is and what it does., Its job is foreign body detection — specifically metal contamination — to protect:, - Product safety, - Equipment (pumps, fillers, valves), - Brand and compliance (HACCP, BRC, IFS, etc.), You’ll typically find these on:, - Dairy products (cheese, butter, powders), - Ready meals, - Meat & poultry, - Bakery, - Packaged foods on conveyors, What metals it detects, The IQ range detects all three common metal types:, - Ferrous (iron, steel), - Non-ferrous (brass, aluminium), - Stainless steel (the hardest to detect in food environments), Sensitivity depends on:, - Aperture size, - Product type (wet/dry, salt content), - Conveyor speed, - Calibration, The LOMA IQ control system, The LOMA IQ® controller you sho ...

Dimensions search coil opening (WxH): 650 mm x 150 mm, Metal-free zone on both sides of the search coil: 75 mm, Inlet length to the metal-free zone: 1,200 mm, Conveyor dimensions (LxW): 2,200 mm x 600 mm, Transport height: 800 mm +/- 50 mm, height adjustable feet, Conveyor belt speed: 25 m/min (adjustable via frequency converter), Conveyor Type: Intralox 1100 Flush Grid - BLUE, Running direction: standing in front of the control panel: from right to left, Degree of protection: IP66, Ejection system: Stop if metal is found with an acoustic signal

Loma 6000 checkweigher. Push reject for over- and underweight weighins Maximum weight: 6 kg per product Weight precision: 0,6 gram Speed: 250 products per minute Finish: 304 stainless steel Conveyor width: 140mm Year of production: 1999 Serial number: ACW-40540-010733 Condition: good Dimensions: 1.800mm x 900mm & 1.100mm (LxW&H)

Loma Model: 7000 metal detector checkweigher Serial: ECB1101424575 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins

150 x 250mm aperture.

Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.

350 x 200mm aperture. 300m conveyor width. 1.8m long. Push reject system. Right to left production. Full supermarket spec. 880 Line height with adjustable feet.

300mm Conveyor Width. 350mm Weighpad Width. 870mm Line Height. 1370mm Machine length. Right to left production line. Reject bin. Supermarket specification. Adjustable feet.

550 x 160mm aperture. 400mm conveyor width. 3250mm machine length. 900mm line height with adjustable feet. New belt fitted on the machine. Right to left production. Full supermarket spec.

450 x 160mm aperture. 300mm conveyor width. 1800mm machine length. 870mm line height. Left to right production.

350 x 115mm aperture. 300mm conveyor width. 1.3m machine length. Air reject system. 1.3m machine length. Adjustable line height with wheels.

370 x 100mm aperture. 300mm conveyor width. Right to left production. Reject system. M&S Spec. 2100mm long 840mm line height with adjustable feet.

Usable aperture size 350mm (wide) x 135mm (high) 230mm wide conveyor belt Full length 2500mm Line height 850mm Auto push reject on both machines. Left to right production direction

350 X 110mm usable aperture. 260mm conveyor width. 920mm line height. Twin head metal detector with reject. M&S Spec. Right to left production line.

Usable aperture size 550mm (wide) x 200mm (high) 450mm wide conveyor belt Full length 2000mm Line height 860mm Right to left production direction

450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.

450 x 155mm aperture 400mm conveyor width. 920mm line height with adjustable feet. 1800mm machine length. Right to left production. Drop reject system.

Loma IQ Twin head metal detector Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject, 3Ph

Conveyor dimensions: 28cm wide x 9cm high Belt width 30cm Inlet height 152cm Push-out by trigger belt External dimensions 90 x 250 H 175cm mobile

Checkweigher Manufacturer: Loma Type CW 3 Year of construction 2010 Weighing range 50g-6000g Belt length 300 mm Belt width 400 mm

Metal detector Manufacturer LOMA IQ2 Type emc Year of manufacture 2001 Belt width 20 cm Height of the passage 12 cm Documents available in German With conveyor belt and ejector

Checkweigher Manufacturer: Loma Type CW 3 Year of construction 2010 Weighing range 50g-6000g Belt length 300 mm Belt width 400 mm

Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,

Producent: LOMA Type: IQ 3 Metal detector LOMA type IQ 3 with Intralox conveyor belt Multi-Frequency Metal Detector with Conveyor Belt With TOUCH screen operator terminal Product Feedthrough: 550 x 150 (100) mm (W/H) Fully automatic metal detection system with evaluation electronics Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Loma IQ3+ Metal detector Stainless, belt dimensions 1100mm x 300mm, aperture 500mm x 90mm,

Type: IQ³+ST Serial number: QPB90-15-24908D Year of construction: 2014 Belt width: 860 mm Passage: 860 x 110 mm Compressed air: 6 - 8 Bar Power: 3 x 415V, 50Hz, 0.5kW Dimensions: 2350 x 1450 x 1650 mm With pneumatic reject

General SKU347X805 MakeLoma LocationBarneveld CEcheck TypeIQ3+E Main Features MaterialStainless steel/Plastic Dia/Width650 mm Specified Features - Metal detector MaterialPlastic, Stainless steel 1.4301 (304) Metal detectorcheck Tunnel sizes650x370 mm With conveyor beltcheck Belt width495 mm Belt length1500 mm With motor0,25 kW 240—380 V Information No.QEUS5-40-34148D Year of construction2016 Mounted on wheelscheck With switchgearcheck Floorspace1,60x1,35 m Total height1,35 m Weight1250 kgMetal detectorsLomaPackaging machines > Metal detectorsBrand > Loma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU347X804 MakeLoma LocationBarneveld CEcheck TypeQ3 Main Features MaterialStainless steel/Plastic Dia/Width650 mm Specified Features - Metal detector MaterialPlastic, Stainless steel 1.4301 (304) Metal detectorcheck Tunnel sizes650x360 mm With conveyor beltcheck Belt width500 mm Belt length2600 mm With motor0,25 kW 110—240 V Information No.Q3B65-40-27682D Year of construction2015 Mounted on wheelscheck With switchgearcheck Floorspace2,80 x 1,32 m Total height1,50 m Weight520 kgMetal detectorsLomaPackaging machines > Metal detectorsBrand > Loma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

metal detector spec. for jars, make Loma type IQ4, year 2005/2021, With search head, make LOMA IQ4 (search head - opening: width: 150 mm, height: 250 mm), Search head design: stainless steel housing, protection class IP 69k,, · 3-frequency technology to better adapt to different product effects and package sizes, Conveyor belt year 2005, unused, with Intralox tape, IP 67,, ejection by means of an air nozzle,, Drive with Danfoss frequency converter,, · Output: up to max. approx. 200 packs / min., Tape data:, Protection class: IP 67, · Total length: approx. 2,000 mm,, Useful width of the Intralox belt: 100 mm,, · Lockable box for rejected products, Plastic side guide in the inlet: length: 560 mm, height: 130 mm,, · With transfer rollers in the infeed and outfeed for gentle transfer of the containers.

Manufacturer: Loma Model: IQ³ Year: 2009 Condition: Used Serial Number: AMC45371 - 48763F Stock Number: 3362J Belt width: 500 mm Product height: 150 mm Shuttle conveyor: +/- 350 mm Compressed air: 6 - 8 Bar Power: 3 x 415V, 50Hz, 1.2A Dimensions: 2700 x 1000 x 2500 mm

Metal detector

Belt width: 500 mm, Product height: 150 mm, Detector size: 550 x 200 mm, Shuttle conveyor: +/- 350 mm, Compressed air: 6 - 8 Bar, Power: 3 x 415V, 50Hz, 1.2A, Dimensions: 2700 x 1000 x 2500 mm

Key data: 6 Meter

Machine Type: Plasma Inverter Cutting Machine Make EP-Systems Type M 40.60 Connection voltage: 1 x 230 volts, setting range: 15 – 40 amps, duty cycle: 60 % ED at 40 amps 100% ED at 30 amps Current adjustment infinitely variable max. quality cut 2 mm max. cut-off cut 5 mm Cooling inverter through built-in fan Cooling burners by compressed air Portable assembly system design Fuse 16 amps Dimensions L x W x H 470 x 250 x 250 mm Weight 10 kg Age 5 years Condition workshop-tested new incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece plasma torch PH-70, 6 mtr. long 1 piece ground cable 1 piece compressed air hose 1 Piece Instruction Manual Warranty 12 months from the date of delivery Original price €1,750.00 + VAT Price kpl. with the above accessories €159.00 + VAT _____________________________ ...

SNA-03. Other and Auxiliary Systems Air Technology Systems a) 1 unit Type Wolf KG 160/9391, functional, Built: 1991 b) 1 unit Type Wolf KG 40, functional, Built: 1991 c) 1 unit Type Eichelberger NSR 315, functional, Built: 1991, Rooftop system Manufacturer: Wolf Anlagen Technik GmbH Technical Data: a) 15,400 m³/h; 10 kW; 380V; 1500 rpm; 710 Pa b) 2,400 m³/h; 0.6 kW; 380V; 1500 rpm; 300 Pa c) 3,500 m³/h; 1 kW; 380V; 1500 rpm; 450 Pa Motors: a) 71M06 SIEMENS 1MA5163 4BB; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 b) 71M08 Loher ENCV090 SB 84A; 0.6 kW; 380V; 1500 rpm; 50Hz, Built: 1991 c) 71M07 FLENDER ENGV160 MB02A; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-06. Air Technology System, 2 units WOLF KG 100, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH & CO.KG Technical Data: 6750/6050 m³/h; 15 kW; 1500 rpm; 650 Pa Motors: 65M01 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M02 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M03 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M04 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Additionally, 2 refrigeration compressors DWM Copeland, Built: 1992 Type DMRH 750EWM/000; Capacity 26.5 m³/h; 1550 rpm Find more here - / Contact us at -

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Depositor Serial: D150P511007 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame,

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...

FRIGA SYSTEMS 6H-35.2Y Brand:FRIGA SYSTEMS, BITZER Type:6H-35.2Y Stock number:M22-1301 Cooling capacity:70.0 kW Application:Cooling Number of fans:6 Refrigerant:R449A, R452A Refrigerant Content:55 l Voltage:400 Volts Power consumption:22,5 kW Motor power:25 kW Dimensions:2600 x 1600 x 1670 mm Weight:863 kg Year:2009 Number in stock:1 piece(s) Price:Quotation request Description: Very nice Friga Systems condensing unit, equipped with a Bitzer 6 cylinder piston compressor, condenser (6 fans), fan speed controller, liquid vessel 55 liters and a switch box. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +40°C. Visit also our website: used-refrigeration

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

Machine type TIG inverter welding system gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 4 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Original price 1.550,00 € + VAT Price kpl. from ...

Machine Type: TIG Inverter Welding Machine Gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 6 years Condition workshop-tested new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Original price  ...

1998 3D Systems SLA 5000 BUILDING SIZE: 500X500X800mm YEAR OF PRODUCTION: 1998 CONDITIONS: PERFECTLY WORKING, CUSTOMIZED LASER, 218Mw (20.000 WORKING HOURS) LAST MAINTENANCE DONE LAST WEEK (WE CURRENTLY DO 1 MAINTENACE A YEAR BY THE SPECIALIZED TECHNICIAN)