log used for sale

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Debarking machine type cambio 75 6-arm air ten rotor approx. 8 years old. Machine in good condition. The machine has been completely overhauled in 2007 and can be visited at any time or expanded from the existing log yard. Plant with indentation and centering system and extract roles work.

"PAWERT" SPM I-90/200 Manufactoring in 1992, reconditioned in 2016 Mechanical single head crank-type Briquette Press for continuous Heavy Duty operation. - Capacity: 2,650 Lbs/Hr (1,200 kg/Hr) depending on raw material quality. Briquette dimensions: 3-1/2" (90 mm) dia.; 3/4" to 11-3/4" (20 - 300 mm) length. Main drive: 75 HP (55 kW installed). High quality welded steel construction. Belt driven flywheel drive. Pre-Heated oil Chamber. This press has (200) press strokes per minute forcing the material through an extrusion chamber to produce uniform material at a high pressure; significantly reducing the volume from of chips/dust to a densified log. This line also has: fully automatic cutting saw control box. < Conveyor Belt. KALLFASS UNIVERSAL Type "600" Shrink Tunnel for packaging. The PAWERT Press was reconditioned in 2016 This is a complete line. it just needs the ...

Very nice good working sawmilling for sale Very nice well maintained sawmill line for sale Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor . grinders Very well-kept LINE! READY TO WORK

Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm from the root and Length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm Neukv Roller chain driver: gear reductior transmission motor of 2.2 kW hydraulic unit 5.5 kW Total weght including main motor 5000 kg

BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...

Special production plant of the brand Friulmac for the production of (standard) garden houses, wooden houses, log houses etc. System Block construction and block plank construction tools, milling and suction device. As good as new!

Feed drive Infinitely adjustable Electronic handwheel can be switched to 3-axis Hydr. Tool tension rigid angular table: 900 x 530mm Central lubrication automatically Vertical milling head Pinole vertically extendable 90mm stroke Chip catch bowl Coolant device Documentation Geometric acceptance protocol similar to DIN 8615 Speed geom. graded: 21 Speed range vertical/horizontal: 40-400 min-1 Tool holder: SK 40 DIN 2080 Weight: approx.2.300 kg Table load: 500 kg Painting: RAL 6011 green Dimensions: approx. 2.20 m x 2.20 m x 2.10 m Test log attached

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

WEIMA shredder for carpentry-carpentry sawmill waste -old wood etc. Type:WL 4. Feeding opening: 600x1050.mm. ( Log Funer ) Rotor diameter:252.mm. Rotor width:600.mm. Drive power:18.5kW. Tools: ( Knife piece 28.) 40x40.mm. Koncav Vs9lrq Weight:1300.kg.

Hydraulic mobile log splitter make GÜDE type DHH 1050 / 10 TZMasch.-No: 403512 Art.-No: 01970 year of manufacture 2000Technical specifications:Gap pressure: 10 tOperating pressure: 230 barStroke Length: 525mmMax. gap diameter: 400 mmColumn: 120 x 120 mmTable size: 250 x 250 mmApprox. weight: 92 kgExternal dimensions approx.: 580 x 910 x 1640 mmwith- Drive via PTO connection- GE + GS - signs- Two-hand safety operation- Splitting lifting devicelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description: -Horizontal band saw Lantzmann BS910E Premium (electric motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -GX630 Honda engine with electric starter -2m rail -Carbide saw band Technical specifications: Engine: Electric motor 11 kW Power: 400V / 50Hz / 3 phases Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: No. Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 2080x750x950 mm Weight: 761/821 ...

Volcanoring MATEC V.1.0 The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached ...

Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached.  ...

Cone splitter JSK-350-MS01, splitting cone, drill cone, log splitter, 1x hydraulic earth boring device HBG-1500 (for mini excavator, tractor, front loader), 1x adapter, quick coupler MS-01 (for HBG-1500 and HBG-2000), 1x Jansen splitting cone, 1x jansen fixation adapter splitting cone

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

Mobile sawmill Fähe MSV1.1, YOC 2023 - Trunk length: 3 m - Stem diameter: depending on the length of the blade - Saw option: electric saw, chainsaw - Original supports: 2 pieces - Material: Steel - Surface: powder-coated - Machine weight: 30 kg - Space requirements (W x D x H): 1.2 x 3.0 x 1.4 m Details Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed to 2 or more cantilevers with wood screws. Please check the ladder dimensions to make sure everything fits. For the assembly you need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend another log support. Accessories optional: additional master supports

MBO SF56 Log stitching machine with glue tread. Price and more information on request

Description: -Horizontal band saw Lantzmann BS910G PRO (Petrol motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -2m rail -Carbide saw band Technical specifications: Engine: Petrol 27 HP (LONCIN, electric starter) Power: 764 cc Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: Yes Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 1080x750x1050 mm Weight: 722/782 kg -This machine is available right away.  ...

Complete AKE band sawmill consisting of: Main machine list Log manipulation RR 700 Feeding for debarking Debarking - Cambio (sold) Reducers Feeding saw line First band saw - make: AKE (vertical) Second band saw - make: AKE (horizontal) Hacker Cross-cut saw Two cutting saws - make: JONSERED Lamellar saw make: WACO Model 130 Special Hydraulic equipment Pneumatic equipment Suction Control system Spare parts inventory Round wood L = 1800 - 4500 Diameter = 100 - 1000mm Board thickness = 16 - 100mm Capacity approx. 40,000 m3 of round timber / year in 2-shift operation with an average round timber diameter of 30 cm The system was installed after a fire damage in 1998 and produced until 2004/2005. Until 2008 only limited use. In 2013, the system was professionally dismantled with extensive documentation to ensure easy installation at the new location. Technicians f ...

Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m

Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation.   Volume: 1 m3 Materials : Polished stainless steel - Sterilisation (160 - 180?C): Reduction of micro-organisms and their by-products by up to 12 log - Depyrogenation (220-250?C): Destruction of pyrogens and endotoxins inside materials - Horizontal laminar flow - Double door (new) - Electric heating - 2 trolleys - Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300?C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : - empty glassware (e.g. vials, ampoules, bottles) - stainless steel equipment (e.g. trays, machine parts) - moisture-sensitive materials - basi ...

Standard configuration Machine ? Solid machine frame with integrated laser resonator ? Feed station with self centering clamps ? Automatic tube support for raw material ? Feeder claws with self centering parallel collet chuck ? High-precision motors: Digital 3-phase servo motors with high precision of the drive axes. ? Part removal station PRS 3001 with brush table, finished parts up to 3000 mm long ? Tube support for finished parts with wheel-away guide rollers ? Enclosed beam delivery ? NitroLine ? FocusLine ? SprintLine ? Laser power control ? Programmable cutting gas pressure ? Automatic shutdown device ? Work area lighting TRUMPF laser ? CO2 laser TruFlow 2000 ? Radio-frequency excitation ? Maintenance-free radial turbine blower ? Laser control TASC 3 ? Laser log book function ? Chiller Cutting head ? Laser cutting head with 155 mm (6?) lens ? ControlLine Control ? Sinumerik ...

Table length: 300 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 300 mm Vertical Z: 300 mm CNC Brand: _Unknown / Other Seperate coolant and frequency converter Last service &amp; Test Log in 2018 Run out in 1 uM Spindle speeds:50000Rpm Spindle Taper:50ISO/Bt/Mk Length:       1200mm Width:        800mm Height:       600mm Weight:       200kg

NEW - year of construction 2020, PTO-drive, 2/4 fold splitting wedge, 4 m conveyor belt, with log lifter, 10 t splitting force, max. cutting diameter 36 cm, adjustable cutting length 20 - 55 cm, 2 splitting speeds, own weight 675 kg, Hp / kw: 18 hp / 14 kW, Year of construction: 2020

Hydraulic power unit with control With oil cooling Ideal for building log splitters or hydraulic presses

Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Control: Num 1040/X-Log, Work piece width min-max mm: 1680, Min.-max. workpiece length in mm: 4400, Min.-max. workpiece height in mm: 10-80, Working range X: 4829, Working range Y-axis: 1774, Working range Z: 180(280), C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO, Milling engine 1 hours power: 7,5, Number of tool changers: 2, Number of tools per tool-magazine: 4 + 8, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 12, Drill vertical Y: 6, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: 4, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: ca.60, Saw unit: schwenkbar, Radial arm machine: yes, Year :1999

Laser cutting machine TruLaser 3530. Year of production 2008 We offer the buyer the possibility of installation by TRUMPF service technicians Technical data: Additional information - Working hours: Beam ON 2,955 h / Laser ON 15,464 h - X-travel 3000 mm (max 3104) - Y path 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in the X1-, X2-, Xp-, Y1-, Y2- and Z axes - max. positioning speed parallel to the axis 120 m / min. - Simultaneously 170 mm / min. - Acceleration when positioning the X axis 9 m / sec. - Xp + Y axis 15 m / sec. - cutting in the X axis 4 m / second - Cutting in the Xp and Y axes 15 m / sec. Standard equipment - Closed machine frame with built-in laser resonator - Mobile unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet ch ...

MS UBS-6-90 circular sawmill - German production - high efficiency - DTR - year of production 2007 - possibility of installing 6 shields - daily capacity up to 200 m3 max. log diameter 390 mm cutting width from 80 to 250 mm width of the additional board from 18 to 80 mm disc diameter 1000 mm electric disc spacing engine power 2 x 90 kW feed speed continuously adjustable 5-30 m / min 4 kW feed motor power length of the feeding table 8000 mm feed table with chain turners dimensions of the cross feeding table 4500 x 7000 mm length of the receiving table 5600 mm dimensions of the corrugated receiving table 4000 x 4000 mm reception of sawdust with vibrorine two lasers total length 18.5 m weight of the sawmill 9.8 tons

Enveloping line KERN K40-15 is designed for film packaging of magazines, books and other similar printed products. The K40-15 is an extremely flexible system that can be easily and quickly set up to work with products of the required format. The system is able to work with great efficiency. The maximum capacity of the line is 15,000 pieces per hour. Design. The line has a modular design, including: - continuous log loader (ASH module); - main feeder (SHTH); - main conveyor (modules FM2 and FMB); - FPO cover opening (lifting) module; - two additional attached feeders RS341; - film insertion module K40-15; - culling module; - product flip module; - label sticker module; - stacker; - output conveyor

Round timber yard Springer (noisy. Layout) Consisting of log feed 4 strands Separation Depositor Bruks Reducer Crane Blochzug Surveying 3D Speaker Metal detector Mesutronic Debarking Nicholson A5 /27 inch AIRSEAL ! (Rotor new!) Cross conveyors 2 cross-cut saws 66 sorting boxes each 2 sorting lines of 33 boxes each

Description: infeed speed: 0,3 – 1,8 m/min lift of the saw frame: 210 mm number of lifts per minute: 450 cutting height at saw length 500 mm: max. 208 mm height difference of the blocks: +/-0,5 mm cutting width for side fence: 60 – 162 mm cutting width for middle fence for height 30 mm: 2 x 30 mm cutting height for channel option: 2 – 5 x 20 – 65 mm log length: min. 300 mm lamella thickness depending on cutting height and kind of wood: ᐳ 1,5 mm loss of wood material depending on the sawblade: approx. 1,25/1,4 mm saw blade durability depending on the kind of wood: 10 – 100 hours diameter of the 3 connections for dust suction: d=120 mm central, lubrication of the guidances electronic controlled block width: middle fence 2 x 30 Approx. Onsite Dimension. (l x w x h): 2,500 x 1,000 x 2,200 mm, weight approx.: 3,000 kg

Model: BBA 121. Flash Butt Welding Machine for Band Saw Blades. Manual clamping. Manual annealing start stop. Machine cleaned and repainted. Year of manufacture: 2010. Nominal primary voltage: 400 [V AC]. Max. welding rating: 25 [kVA]. Clamping force: 40 [kN]. Forging force: 10 [kN]. Welding ranges. Log bandsaw (carbon steel): 25-120 [mm]. Strip steel: 40 – 100 [mm]. Stainless steel bandsaw: 40-100 [mm]. Weight: 450 [kg]. Dimensions (WDH): 11207801500 [mm]. Instructions and packing included.

Bruks RR800 Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 800 mm measured 1500 mm from the root and Length min 3,2 m max 6,2 m Number of cutting tools 30 Cutting tool width 60 mm Cutting motor 37 kW, 1500 rpm Cutting length 900 mm Roller chain driver: gear reductior transmission motor of 2.2 kW Hydraulic unit 5,5 kW Total weght including main motor 5000 kg

Description: 'SINICO' TR90/2-550 TOP 2000 CNC automatic transfer machine, suitable for tube cutting, facing and beveling operations. N° 1491 Specifications: , Machinable diameter: 12 - 90 mm Range of machinable lengths: 50 - 550 mm Cut-off unit power rating: 9kW Log saw unit speed range: 35 -230 rpm Machine equipped with: , Rapid jaw change rotary table Four vise units rotary table No. 2 machining units for facing, chamfering and centring Bar loader with beam magazine Complete with chip conveyor Use and maintenance manual Harmonisation to CE standards Machine components: , Loader: 6000x2300mm - 2500 Kg Electrical cabinet: 800 x 2400 - 900 Kg Cutting unit: 5000 x 1600mm - 6100 Kg weight approx.: 9,500 kg, Approx. Onsite Dimension. (l x w x h): 11,800 x 2,400 x 1,800 mm

Description: DCH70M twin tube cutting machine with BEWO DB 70 deburring machine N° 0012419 Specification: , Machinable diameter: 12 - 70 mm Machinable length range: 35 - 2000 mm Brushable length range: 140 - 1500 mm , Rated power of cut-off unit: 5.5 kW Log saw unit speed range: 20 -120 m/min Machine equipped with: , Bar feeder with bundle magazine with 5 guides Ducted air tube cleaning system Operation and maintenance manual Harmonisation to CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 3800x2300mm - 1950 Kg Cutting unit: 4500 x 1300mm - 2800 Kg weight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 13,900 x 2,300 x 1,800 mm

Description: DCH70M twin tube cutting machine with BEWO DB 70 deburring machine N° 0013913 Specification: , Machinable diameter: 12 - 70 mm Workable length range: 35 - 2000 mm Brushable length range: 140 - 1500 mm , Rated power of cut-off unit: 5.5 kW Log saw unit speed range: 20 -120 m/min Machine equipped with: , Bar feeder with 5-guide beam magazine Ducted air tube cleaning system Operation and maintenance manual Harmonisation to CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 3800x2300mm - 1950 Kg Cutting unit: 4500 x 1300mm - 2800 Kg weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 13,900 x 2,300 x 1,800 mm

Used IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be pack ...

 Continuous bearing Seam BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik Continuous shelves of different designs improve your intralogistics: FIFO principle: First In - First Out. The goods are removed in the order of put-away. In the area of perishable items such as pharmaceutical products or food essential. You can store large quantities in large shelves of great depth. This increases the utilization per sqm of storage space. You can stock many different items. Small quantities can be picked on the picking side. Loading side and picking side are separated. All processes are therefore fluid. The throughpass speed increases. The risk of accidents is reduced. In addition, you can receive packing tables and roller conveyors from us, which bring and remove the goods on both sides of the shelf. You can also receive an indi ...

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

Approx. 30lfm shelf system shepherd R3000 Manufacturer: Schäfer R3000 2014, as new, see pictures. Stand, galvanized, 2.5 m height, depth 60 cm Shelves, galvanized, 200 kg load/compartment, field width approx. 100 cm Negotiation price: € 2,230.00 net from stock Offer consists of: 31 pcs stand or frame, 2.5 m, galvanized 90 pcs trays, 200 kg load/compartment, galvanized 10 St. Cross Associations for Stiffening 3 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Goods are in stock. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. More information on request. (changes and errors in the technical  ...

Axle distance: 9.0 m Strands: 5 stk (80/80/1,20/1,80), horizontal Used for: Boards/Schwarten Model Logs Design: horizontal Upgrade plated out 5 sprockets with special gear motor 5.5 hp

Approx. 30 lfm shelf shepherd R3000 Manufacturer: Schäfer R3000 as new, see pictures. more than 300 meters present Stand, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load/compartment, field width approx. 100 cm Negotiation price: € 1,630.00 net from stock Offer consists of: 31 pcs stand or frame, 2.5 m, galvanized 90 pcs trays, 100 kg load/compartment, galvanized 10 St. Cross Associations for Stiffening. 3 levels per field (of course several are possible at an extra cost)Other compositions are possible. Heights 2.3m, 2.5m or 3m available. Goods are in stock. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. More information on request. (changes and error ...

Kragarmregal OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4.5 running metres, 4 pcs. stder with boom Negotiation price: € 1,440,-- /net Offer consists of: 4 St. Stander with foot 3 m high 4 adjustable booms, per stand 100 cm, load capacity 800 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Load capacity per stand per side 3,200 kg Height of 2.5 m, 4 m or 6 m available Other compilation on request: Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, ...

Flowing pasteurizer for beer, kvas and juice ÅH&G-10., 20., 30 .300. Capacity: 10hl/h - 30hl/h Product: Beer, kvass and juice Pasteurizer: plate-type Pasteurizer is controlled by processor ÅSIEMENS- LOGO

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...