log sorter used for sale

- 17 programmed formats, 0.5l, 0.75l, 1l - Machine in very good condition

Electricity: Single phase 230v / 5kVa / fuse 25 A / wires 4 mm 50/60 hz The electricity consumption for an 8 hours shift is approximately 2500W x 8h = 20kWh. Cooling water: Since the cooling unit (stainless steel) is a closed water-circuit, there is no water consumption (after a one-time fill). Minimum pressure: 1 bar (15psi) Maximum pressure: 3 bar (45psi) Temperature: between 13°C and 18°C Quality: lime free and reusable Inlet Connection: inch Outlet Connection: inch Compressed Air: Typical consumption of compressed air is 200 Nm / h (120 cfm), with a maximum consumption of 450 Nm / h (300 cfm). Minimum pressure: 6 bar (90 psi) Maximum pressure: 10 bar (145 psi) Quality: iso 8573.1 air quality standard Connection: 1.5 inch

NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU

Description: CCD Color Selector - Sorter Approx. Onsite Dimension. (l x w x h): 2,800 x 1,600 x 1,800 mm, weight approx.: 1 kg

Description: serial number: QC19J018 power: 5.3kW Approx. Onsite Dimension. (l x w x h): 2,900 x 1,700 x 1,900 mm, weight approx.: 1,350 kg

Sorting conveyor with 13 electric off boxers for round wood to wood length 5, 5 m. Complete with drive unit and deflection. Hydraulic chain tensioning. 13 log kickers sorting conveyor with electrical for log length up to 5, 5 m. Including eletric hydraulic chain tensioner, driving station.

5 piece round timber sorting fields, make JUMPER, almost like new condition. Current series, built in 2007! Suitable for round timber length 3,0-5,0 m. With electric output er motor 3.0 kW. Reverse loading ready.

Round timber Sorting conveyors make JUMPER. 43 sort fields right and left 3-5 m length of wood. Drive unit with 2 x 75 kW. From Boxer electrically with each 3.0 kW. 2 x kW frequency converter FIG. 90 each. Steel base with 2,600 mm. sorting chain conveyor height 1 year old! Plant until April 2017 in use to visit! Built in 1997.

Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...

MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning

MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

PLC programmable logic controller SIEMENS type Simatic S5 115U CPU 942B Built-in modules: 1 piece 6ES5 700-2LA12 subrack 1 piece 6ES5 951-7LB14 power supply PS 3A 1 piece 6ES5 942-7UB11 115U CPU 942B without Eprom 3 pcs 6ES5 420-7LA11 Digital Input 32 x DC 24 V 2 pcs 6ES5 451-7LA11 Digital Output 32 x DC 24 V 0.5A - Digital inputs 96 - Digital outputs 64 Mains voltage 120/ 230 volts, 50 Hz Dimensions WxHxD 485 x 305 x 220 mm Weight 10 kg; used

Machine control AUTOMATIONDIRECT, KOYO Direct Logic 205 1 x D2-09BDC1-1 1 x DL250-1 CPU, 1x 32CDD-R 1 x D2-16ND3-2, 1x D2-16TD2-2 2 x F2-08AD-1, 1x F2-08AD-2 1 x F2-02DA-2, 1x F2-04THM 12 - 24 V 25 W used, tested ! Dimensions: 360 x 95 x 95 mm

Electronic Module, Machine Control KOYO, AUTOMATION DIREKT Direct LOGIC 205 Ethernetcotroler H2-EBC Digital Input Module D2-16ND3-2 -Digital Output Module D2-16TD2-2 Analog Input Module F2-08AD-2 Base Module D2-04BDC1-1 12 - 24 V DC 25 W used, tested ! Dimensions: 205 x 90 x 100 mm

Machine control AUTOMATIONDIRECT, KOYO Direct Logic 205 1 x D2-09BDC1-1 1 x DL260-1 CPU 2 x D2-16ND3-2 3 x D2-16TD2-2 1 x F2-08AD-1 1 x H2-ECOM100 1 x H2-ERM 12 - 24 V 25 W components also available used, tested ! Dimensions: 360 x 95 x 95 mm

Data logger, data collector LUFFT GmbH OPUS300i 8161.10 010.0812.9904.10.6.6.65 with display, RS232 interface and cover IP42 New ! Dimensions ( data logger ): 190 x 60 x 60 mm Dimensions ( packaging ): 210 x 140 x 100 mm

M-BUS Logger with Power Supply BERG MBL25b M-Bus Master for 25 terminals,128 MB Flash Interfaces: 1x RJ45, 1x RS232, 1x RS485 Supply voltage: 18 -30 V DC, max. 0.7 A Power supply: TDK LAMBDA DSP10-24 Input: 100 - 240 V AC, 47 - 63 Hz, max. 300mA Output: 24 V DC, 10 W used, tested ! Dimensions ( data logger ): 91 x 88 x 58 mm Dimensions ( power supply ): 91 x 17 x 55 mm

Electronic Module, Machine Control KOYO, AUTOMATION DIREKT Direct LOGIC 205 ( LOGIC205 ) Ethernetcotroler H2-EBC Digital Input Module D2-16ND3-2 Digitaleses Output Module D2-16TD2-2 Analog Input / Output Module F2-4AD2DA Base Module D2-04BDC1-1 12 - 24 V DC 25 W used, tested ! Dimensions: 205 x 90 x 100 mm

Logic element set, AND valve PARKER, TELEPNEUMATIC PLL-B12 080052, 80052 Set consists of 2 valves ! New ! Dimensions(single AND valve): 66 x 26 x 30 mm Dimensions (packaging): 75 x 70 x 35 mm

Logic element set, branch block TELEMECANIQUE PSDA12 080211 Set consists of 3 branch blocks ! New ! Dimensions(single branch block): 65 x 50 x 30 mm Dimensions: 100 x 80 x 70 mm

Log splitter RAU Type AHS 200 Base frame without hydraulics, cylinder available. To rebuild

Writing desk, rolling desk, floor trolley, logistics trolley, shelf trolley Transport trolley, platform trolley, workshop trolley FETRA Type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg Roller pult made of tubular steel and profile steel screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop strip, approx. 10 inclined - 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces of swivel-fixed castors (125 mm) with plastic rim and rubber coating on the tread - 2 pieces fixed castors with brakes Space requirements L x W x H: 600 x 600 x 1190 mm Net weight: 25 kg very good, as good as new condition; used

CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, solar cables, inverters, data processing devices, microloggers -Campbell: Scientific SDM-CAN Datalogger -Dimensions: 235/110/H20 mm -Weight: 0.3 kg

inverter, data processing device, data logger -Manufacturer: Wilmers, wilog Data Logger -Housing: 0903-35-OP303 -Mounting parts: see photos -Dimensions: 500/300/215 mm -Weight: 11.6 kg

Rundholzsortier- und Transportwagen BAJLER ZEMBROD SPURBREITE 3m

Mebor no wravor, Wood-miz; Mebor 1100pro Very good condition Only 2262 hours working Motor 30kw 2 arms chain turning logs 10m railway Loading logs arm Timber conveyor Sharpening machine

CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control from CNC machining center Mikron UME 600 -Type: LE 415 B 267 223 49 -Individual components: see photos -Dimensions: 480/330/H165 mm -Weight: 10.8 kg

The heating system includes: - Boiler Buderus Logano GE515- gas boiler 350-400 KW - Gas burner Weishaupot WG40N/1-A ZM-LN, probably built in 2010. - Diaphragm pressure expansion vessel 800 liters, manufacturer Reflex. - Storage water heater 390 litres, Buderus. - Complete control

Qty. 1 Second-hand log homogenising furnace Mfc.: Rackwitz Industrieanlagne GmbH Built: 2009 Annual production: 50.000 tons mix Furnace charge max.: 25 tons Furnace performance: 6 - 7 t/h of 10 LOG Logs diameter: 103 mm - 405 mm Logs length: 7,000 – 7,300 mm Type: Cross circular Furnace cross circulator 3 pieces Heating zone Furnace Dimensions: 30.300 mm x 3.400 mm x 11.000 mm – L x W x H

Used logistics equipment for sale at short notice! It contains about 300 pieces of Multishuttle DMS2! Available at short notice! Functional condition like new! Interesting price! Subject to prior sale!

Description: The system was overhauled for every single component before it was originally installed. Disassembled sawmill plant. , Below is a description of the parts making up the plant (excluding parts not included in the sale, which are absent from the original plant). In order from the first photo (after photo 'disassembled components'):  , Band saw control panel. Saw carriage with 2 vices and variable distance. Saw carriage rope drum. BONGIOANNI saw body Diameter: 1300 mm No. 2 motors of 55 kW power for STORTI multi-blades, No. 1 motor for BONGIOANNI band saw, No. 1 variator for saw carriage. STORTI multi-blade saw Switchboard for BONGIOANNI saw and for automation. Exhausts. Rear roller conveyor of mitre saw with No. 2 stops. Roller conveyor for introduction to STORTI multi-blade saw. Band saw unloading roller conveyor. Three-way conveyor. Lower flywheel o ...

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

Split Tray Sorter (Dual-Split) / Drop Flap Sorter / Bombay Sorter, 270 targets, incl. conveyor technology, telescopic belt conveyor, etc. – second-hand - : Price on request! The system is a complete sorting system including goods receipt and shipping! Also sold in partial quantities! Manufacturer: DistriSort (Netherlands) Type: Split Tray Sorter Year of construction: 2017 / 2018 approx. 270 destinations Length of the facility approx. 45m Width approx. 12m The sorter consists of manual feeding, waste conveyor, item identification, over 270 outputs, transverse exits, export containers, sorting material transport and packing stations. Basic data Sorting system incl. conveyor technology Up to 14,400 lay-ups per hour (average 12,000 / hour) On request (for an extra charge) incl. extensive conveyor technology, Nerak, scanner, goods receipt area, shipping area with c ...

Christiaens asparagus sorter for asparagus will be available for sale in June 2024

Centrifugal Sorter Manufacturer Hoppmann CE Marked Yes Voltage 400 V Frequency 50 Hz Manufacturing date 1997

As good as new plant for sale Air sifting for substitute fuel, mixed construction waste, bulky waste, household waste Facility can be visited by appointment! Few operating hours Subject to prior sale!

General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU324U773 LocationBarneveld MakeOCS Checkweighers GmbH TypeHC No.1004488 Year of construction2009 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height1,71m Weight370kg CEcheck Floor space2,16x0,83m Extra SpecificationsOperating pressure: 6 bar.Operating temperature: +5°C...+40°C.Maximum weighing range: 1500 g.Belt width: 195 mm.Scale platform: 195x250 mm.Feeder belt width: 32 mm.Feeder belt height is adjustable.Miscellaneous transportWipotecConveying systems > Miscellaneous transportBrand > Wipotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h

Ladies and gentlemen, Offer: 2 used HALLEN see pictures Dimensions approx. width 21.00m / length 40.00m / eaves 9.00m / first 9.65m Snow load approx. 85 kg/m2 / 2 x crane 12.5 tons approx. 13 meters wingspan Condition very good Sightseeing is possible at short notice. PRICE: on request The price of the hall without dismantling. The dismantling of the hall could be taken over by us. The reconstruction of the hall can be organized At the moment we can offer other high-quality halls in the size of 150 m2 to 12,000 m2. We will be happy to send you an offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake ...

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.

 Continuous bearing Seam BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik Continuous shelves of different designs improve your intralogistics: FIFO principle: First In - First Out. The goods are removed in the order of put-away. In the area of perishable items such as pharmaceutical products or food essential. You can store large quantities in large shelves of great depth. This increases the utilization per sqm of storage space. You can stock many different items. Small quantities can be picked on the picking side. Loading side and picking side are separated. All processes are therefore fluid. The throughpass speed increases. The risk of accidents is reduced. In addition, you can receive packing tables and roller conveyors from us, which bring and remove the goods on both sides of the shelf. You can also receive an indi ...

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

Ladies and gentlemen, in the offer is an investment that could be suitable for an online mail order business. approximately 20,000 or more shipments per day. If you are interested, please contact us. Pictures and plans of the plant are available. Intermediate sale and error are excluded. Yours sincerely Trade & Translations