126,696 used machines on RESALE, but how to find them? Machine Search
Sliding table saw ALTENDORF F45 -used-double trolley, scoring unit, rip fence with fine adjustment, boom table, hydraulic height adjustment, hydraulic swivel adjustment, digital display of the swivel angle, speed display, table extension anodized aluminum, table extension aluminum anodized, angle mitre stop, upper protective cover narrow and wide, automatic brake, dust-tested---------- Technical data ----------Swivel range: 45 Â, carriage length: 3,200 mm, Cutting width: 1,300
Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand
saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Twin-shaft multi-blade saw Raimann Type KD 31 Year of Make: 1981 Chain width 340 mm Cutting height 200 mm Electric height adjustment 2 x 45 kW motor Shaft diameter 65 mm Feed modernized to infinitely variable speed via potentiometer from approx. 0 to 40 m/min. incl. 3 saw bushes with saw blades and partly new saw blades Transport chain with spikes Good condition, ready for immediate use, demonstration possible.
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...
Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 40 mm Cutting speed: 10 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm
Height=1.7 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 155 kg,
Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 138 kg,
Height=0.35 m, Overall length= 0.9 m, Overall width= 1.1 m, Net weight= 63 kg,
Height=0.33 m, Overall length= 0.24 m, Overall width= 0.7 m, Net weight= 20 kg,
Height=1.7 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 155 kg,
Height=1.97 m, Overall length= 1.01 m, Overall width= 1.018 m, Net weight= 305 kg,
Height=1.85 m, Overall length= 0.96 m, Overall width= 0.94 m, Net weight= 210 kg,
Height=0.955 m, Overall length= 0.619 m, Overall width= 0.519 m, Net weight= 76 kg,
Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 136 kg,
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 x 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 125 x 95 mm capacity 60 degrees: round: 90.0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 90 mm 0: 15 / 30 / 45 / 90 U/min total power requirement: 1.8 / 2.5 kW weight of the machine ca.: 375 kg range L-W-H: 1000 x 1100 x 1870 mm Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The larg ...
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The ...
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm links capacity 45 degrees: round: 75 mm rechts 0: 30 / 60 U/min. dimensions of saw-blade: 350 x 32 mm weight of the machine ca.: 220 kg Furnishing: - Robust cast iron structure - Gear with bronze wheel and ground / hardened - Steel screw in a special oil bath - Vice with counter-clamping device for - double workpiece clamping - Electric coolant pump for cooling and lubrication of the saw blade Scope of delivery: - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded views - Crane eyes for transport The machine is delivered without a saw blade Special accessories included: - Base cabinet with door (steel frame) The data for this ad was cr ...
Dewalt Radial arm saw Cutting width 350mm Cutting height 65mm 1.5KW 400V 50HZ Table 800 x 600mm Solid, cast-iron radial arm boom for maximum accuracy and durability with base frame Pull saw double bevel adjustable Hemming cuts also possible G&-5195-M3180
SPECIFICATIONS: Work table: 960 x 1100 Flywheels: Ø 1100 mm Saw blade width: 120 mm Electrically adjustable saw blade guide Installed power: 22 kW EQUIPMENT: 1 cutting band saw Spare blade TECHNICAL DATA Cutting Band Saw: Roller: Ø 400 mm Roller height: 270 mm Max. opening - saw blade: 200 mm Maximum opening roller saw blade: 400 mm
CURSAL TRV500 mobile stop cross-cut saw in accordance with CE standards, working direction from right to left, consisting of: – RALM 4000 x 450 roller conveyor – TRV500 rapid cut-off machine with: Double button cutting control PV500 pressure 150mm stroke blade D=500mm PLC for cutting programming and ejector management – TSLR 5000 x 400 discharge mat – electronic retainer FCN/80 L=5000 – 1 EP1500 pneumatic ejector – roller rail unit VRF1500x2000x5
Various accessories for saws in professional woodworking are offered - consisting of replacement profile cutter heads (partly from Leitz-Variform, as good as new and partly in original packaging). If requested, individual sales may also be possible. The accessories are currently located in Magdeburg and are being sold - due to a restructuring. Only the accessories offered are expressly sold, any items shown in the photos are expressly not part of the scope of the offer. The offer prices are to be understood as gross prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer.
Fields K7 Sliding table saw Motor power: 400V 7 KW, 50HZ Format sliding table: 2.3 m Cutting height: 103mm Saw blade: swivel, max. 315mm WJ-400105 Boom Table with Telescopic Stop Folding Stops Upper protective hood Year of manufacture 1997
Max. saw blade diameter: 250 mm Manual material tensioner Saw blade lubrication
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power ...
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
Key data: 300 mm
Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg
Key data: 400 mm
Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades
Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m
Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Fully automatic hydropneumatic machine · Left/right miter cuts · Head bevel cuts up to 45° (shifter) · Material feed unit with material clamp · Integrated coolant spray system · MPS control: · Saves cut start/end times · Displays power consumption, workpiece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. saw blade diameter: 400 mm Pneumatic material tensioners
Panel saw Type: F45 EvoDrive Manufacturer: Altendorf Year: 2019 Control: Evo Drive Sliding table 3200 mm CNC controlled parallel ruler, electrically adjustable 0 - 1300 mm Miter ruler extendable up to 3200 mm Main motor power 5.5 kW / speed 3000/4000/5000 rpm Max. blade Ø: 500 mm (without pre-cut) Max. cutting length: 3200 mm Automatic calculations for oblique and bevel cuts Simple, intuitive, with quick access to functions Machine equipment: 2-axis pre-cutting unit (0.75 kW motor) Increase in main motor power to 5.5 kW CNC parallel ruler - cutting width 1300 mm Extension of sliding table to 3200 mm CLIPBOARD cutting plan holder Angle ruler - bevel cuts up to 49° Start/Stop switch directly on the carriage Machine in good condition, fully functional Find more here - / Contact us at -
Pull saw on substructure with mobile device (support table / wooden system) Further dates will follow. The sale is carried out on behalf of the owner from the current location in the "current state"
Sliding table saw ALTENDORF F45 -used-double trolley, swivelling, rip fence with fine adjustment, boom table, table extension anodised aluminium, table extension anodised aluminium, angle mitre stop, upper protective cover narrow and wide---------- Technical data ----------swivel range: 45 Â, carriage length: 2,500 mm, cutting width: 800 mm, max. saw blade Ã: 450 mm, motor power: 5.5 kW, extraction nozzle Ã: 80 / 120 mm
Band saw CENTAURO SP600 AVAILABLE FROM JANUARY 2026
A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.
Manufacturer: Behringer Model: HBP 420-723 G Year of Manufacture: 2004 Operating hours : approx. 15,800 hours Including powered roller conveyor Silberland B 660 / 15 m (built in 2010) Rated Voltage: 400 V Frequency: 50 Hz Rated Current: 20 A Control Voltage: 24 V DC Technical Data Working Range: - Round at 90°: Ø 420 mm - Flat at 90°: 720 × 420 mm - Flat at 75° left: 710 × 420 mm - Flat at 60° left: 650 × 420 mm - Flat at 45° left: 550 × 420 mm - Flat at 30° left: 350 × 420 mm - Flat at 60° right: 650 × 420 mm - Flat at 45° right: 460 × 420 mm Smallest Cut-off Length (90°): - Manual: 10 mm Cutting Speed: - 17 – 120 m/min (stepless adjustment) Saw Blade Dimensions: - 6300 × 41 × 1.3 mm Band Tension (hydraulic): - 950–1200 N/mm² Motors: - Saw Drive Motor: 5.5 kW - Hydraulic Motor: 1.5 kW - Coolant Pump: 0.12 kW - Chip Conveyor: 0.5 kW Electrica ...
Manufacturer: BEHRINGER Model: HBP 410-723 G Year of Manufacture: 2014 Operating time: approx. 5,900 hours With automatic supply and removal Electrical Data: - Rated Voltage: 400 V - Frequency: 50 Hz - Rated Current: 36 A - Control Voltage: 24 V DC Saw Band Dimensions: - 6,300 x 41 x 1.3 mm Technical Data: - Working Range Ø / flat at 90°: 410 mm / 700 x 400 mm - Working Range Ø / flat at 75° left: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° left: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° left: 410 mm / 450 x 400 mm - Working Range Ø / flat at 30° left: 300 mm / 300 x 300 mm - Working Range Ø / flat at 75° right: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° right: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° right: 380 mm / 450 x 380 mm Minimum Residual Piece Length: 45 mm Cutting Speed: 20 – 140 m/min Feed Pressure (B ...
formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50
Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg
minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783
A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.
Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame
Key data: 350 mm, 110 mm
Like new: Saw blade: ø 350 mm Saw Capacity: 110mm Round / 100mm Square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Equipped with: - Coolant system - Pneumatic clamping - Variable feed rate -Saw blade Country of origin: Germany Motor power: 1.8 kW Machine LxWxH: 800 x 1000 x 1850 mm Machine weight: 800 kg
maximum number of results exceeded
please refine your search
