log band saw used for sale

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

Band Sawing Machine MEP SHARK 281, Information about technical data are not binding., Machine available subject to prior sale., Max cutting capacity Ø: 250 mm, Max cutting capacity: 280x200 mm, Blade dimension: 2950x27x0,9 mm, Band speed range: 36 - 72 m/1, Blade motor power: 1,5 - 1,8 Kw, Working plane height: 950 mm, Weight: 370 Kg

Key data: 45 °, 3300 mm, 850 mm

Martin T72A sliding table saw with: hydraulic saw height and digital display at eye level Hydraulic saw blade swivel and digital display at eye level Handwheel adjustment of the cutting width and digital display at eye level Parallelogramtic for angular sections -46° to 46° and digital readout Scoring saw Brand MARTIN Type T72A Comfort Year of Make: 1999 Control panel eye level integrated in the extraction support (saw blade height, inclination, cutting width) Saw blade height adjustment: Hydraulic with digital display in the screen 0-170 mm Saw blade tilt: Hydraulic with digital display in the screen 0- 46° Parallel stop: handwheel adjustment with digital display in the screen Saw hood: Electric height adjustment of the hood Manual move to the right for oversize products to saw Landing table: Aluminium parallelogramtisch +/-46° miyt digital angle display Leng ...

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; Brand MARTIN Type T72A M-No.: V238101 Year of Make: 1997 YouTube: Control panel at eye level integrated in the extraction support Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Landing table: parallelogram cross table Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with digital 2-point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2800/4000/5500 rpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 1,250 mm Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 1,600 KG

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; 3-axis electric scoring adjustment Brand MARTIN Type T72A Aut Year of Make: 1997 Control panel: At eye level in the extraction support, integrated with 3-axis NC control, electric saw hood, height adjustment and 3-axis scoring Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Saw hood: Electric height adjustment Landing table: Steel (galanized) with fixed detent points for mitre angles 0°, 22.5°, 30° and 45° or freely selectable intermediate interlocking angles Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with 2 point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2000/275 ...

Key data: 45 °, 3300 mm, 1250 mm

MARTIN T73 AUTOMATIC, parallelogramtic, driven trolley, 3-axis control Mark: MARTIN Type: T73 AUTOMATIC Year of Make: 2001 Table dimensions: 1,350 x 1500 mm. Cutting width: 1,350mm Edging table: 3,300mm Main saw: 7.5 kW Saw blade shaft: ø30 mm. with two drive pins Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø 400 mm retractable under table; Cutting height: 170 mm. (Saw blades. 500 mm.) Saw blade swivel: 0 - 46° Scoring: Optional (Could be installed for € 1,750 surcharge) Cutting width: 1,350 mm Rip fence: Stop ruler in anodized aluminum; Final position; Automatically lowers below table level Length stop: Digital length stop made of anodized aluminum with Martin 2-point stops Control: NC control with LCD display of width, height and oblique angle, plus 2 digital length stops Screen: LCD control panel at eye level, swive ...

Key data: 45 °, 3300 mm, 1350 mm

.

Key data: 92 °, 3300 mm, 1350 mm

.

Key data: 45 °, 3200 mm, 1250 mm

Griggio Unica 400 sliding table saw Mark: Griggio Type: Unica 400 Year of Make: 2010 M-No.: MC00101468 Main saw: ø400 mm, saw protrusion 125 mm, inclination 0-45° Saw blade height-, -bevel adjustment: electric with digital display Speed: Saw blade protruding: 0-125 mm electric with digital display Saw blade tilt: 0 - 45° electric with digital display Motor: 7.5 KW Vorrits saw: 0.75 KW, ø125 mm Trolley 3,200 mm Cutting width: 1,250 mm electrically with digital display on the width stop Length stop: 2,200 - 3,300 mm Lay-down table: steel with scale angle display, adjustable support support and product-friendly roller Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 820 KG

Key data: 45 °, 1350 mm, 850 mm

Altendorf TKR45 Brand: Altendorf Type: TKR45 M-No.: 79-11-204 Year of Make: 1979 Cutting length 1350mm Surface-mounted table Yes Cutting width 850mm Cutting height (max) 155mm Saw blade (max): ø450 Main saw shaft ø30 Saw blade inclination: 0-45° Motor 5.5 kW Speed 3000/4000/5000 omw/m Weight 910KG

Key data: 880 mm, 880 mm

Brand: Centauro M-No.: 2064 Year of Make: 1996 Motor 5.5 kW, with electro-pneumatic rem Table surface: 1,100800 mm Wiel diameter: 900mm Cutting height: 550 mm Band width: 850mm Belt length: 6,190 - 6,380 mm Band width: 30 - 50mm Tilt (table): 45° Table height: 960 mm Suction support: ø120 mm Machine dimensions: 925 KG Noise: 82.3 dB(A) Standard: CE

Key data: 700 mm, 680 mm

NRA700 Band Saw Brand: Agazzani M-No.: Year of construction: Motor 2.2kW Table surface: 740640mm Wiel diameter: 700mm Cutting height: 405 mm Band width: 680mm Band Saw Length: 5020/51400mm Band saw width: max. 40mm Tilt (table): 45° Table Levels: 960 Suction support: ø120 mm Machine dimensions: 1.3506702.170

Key data: 2 kW, 4 kg, 14 kW

Holzma HP72 Optimat - Horizontal sizing saw Brand: Holzma Type: HPP82/43/43 Optimat M-No.: 0-240-0 Year of Make: 2001 Control with Cadmatic Holzma CAD Matic Optimization Junior Cadmatic – on line Total connected load: approx. 26 KW Cutting length 4,300 mm Cutting width/depth: 4,300 mm Main saw: 13.5 KW Saw blade protrusion mm: 95 mm Saw height: 82 mm Saw feed: 130 m/min Scoring saw motor: 2.2kW Angle Pressing Device: Sword Grooves: Nuttprogram Collets: 7 Program Trolley Feed: Step-Free Air cushion device 4 pcs. Table dimensions: 3 (1,760650) + 2,170650 mm Suction nozzle diameter: 250 mm Extraction volume: 5000 m³/ h

Key data: 4600 mm, 2200 mm

Striebig Panel Saw Compact 5220 Brand: Striebig Type: 5220 Compact with TRK extraction M-No.: 41596 Year of Make: 2010 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm Rpm: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,200 mm Max cutting height: 2,100 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,980 mm Machine depth: 1,466 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: 2ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

Key data: 4600 mm, 2070 mm

Striebig Panel Saw Compact 5207 TRK - 2005 Brand: Striebig Type: 5207 Compact TRK M-No.: 30215 Year of Make: 2005 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm RPM: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,070 mm Max cutting height: 1,958 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,838 mm Machine depth: 1,428 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

Key data: 5300 mm, 2100 mm

Striebig Automatic 6220AV Panel Saw Brand: Striebig Type: Automatic 6220AV Year of Make: 1985 M-No.: 14118 Max. cutting height: 2,100 mm Max. cutting length: 5,300 mm Max. cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Motor power: 4.4/5.5 KW Saw blade speed: 4,750 rpm Bottom support: Rollers Small parts edition: Yes Measuring system: analog Swivel saw unit: manual Saw feed: manual Mounting: freestanding with rear stand Extraction: ø100 mm Saw bar locking: manual Dimensions: 6.5 x 2.5 x 1.3 m

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

Key data: 5300 mm, 2200 mm

Striebig Automatic 6220AV Panel Saw Brand: Striebig Type: Automatic 6220AV Year of Make: 1985 M-No.: 14118 Max. cutting height: 2,100 mm Max. cutting length: 5,300 mm Max. cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Motor power: 4.4/5.5 KW Saw blade speed: 4,750 rpm Bottom support: Rollers Small parts edition: Yes Measuring system: analog Swivel saw unit: manual Saw feed: manual Mounting: freestanding with rear stand Extraction: ø100 mm Saw bar locking: manual Dimensions: 6.5 x 2.5 x 1.3 m

SPECIFICATIONS: Table size: 1200 x 800 mm Tilting table Flywheel size: Ø 800 mm Installed power: 4 kW

Key data: 90 °, 3000 mm

SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°

A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible.

ALFAMACCHINE T350 double miter saw Dual rip for cutting at 45 degrees Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air demand 5-7 bar Cutting width: 15-80mm Cutting height: 10-80mm Net price

Key data: 315 mm, 85 mm

Metal and non-ferrous circular saw MÖSSNER MK/14 Speed: from 80 to 3000 RPM Table size: 900 x 700 mm Max saw blade diameter: Ø 315 mm Maxi cutting height: 85 mm Motor: 2 speed Ideal for sawing aluminum plates, bronze etc. Voltage: 380 V Length: 1100 mm Depth: 900 mm Total height: 1300 mm Weight: approx 500 kg

Manufacturer: FORMAT-4 Model: Kappa V60 Type of Machine : vertical panel saw Condition: Used. In operation for approx. 6 months Max cutting length: 4200 mm Max cutting height: 2200 mm Max horizontal cut height: 2080 mm Max cutting depth: 60 mm Motor power: 4 kW Saw blade diameter: 250 mm Speed: 5300 rpm Weight: 910 kg Installation dimensions (LxWxH): 5600 x 1700 x 3000 mm Find more here - / Contact us at -

Kolbe K330 Bone Band Saw used Machine is equipped with motor brake, sliding table and portioning stop good condition, only the bone meal container is missing and the machine must be thoroughly cleaned before use Sliding table can be folded away to the side, portioning stop and pusher can be removed The belt is tensioned via a quick-clamping system and the cutting height can also be adjusted and the table can be folded up for cleaning Video about test run available

Tilting double miter saw for chair elements with loader TECNOSYSTEM - CE

Semi-automatic cut-off machine CURSAL mod. TRV 500 – CE compliant - Version with movable pressure - Feed from right to left - Rug GRT 6000x400 - N. 3 unloading benches 1000x1200 - Rejector mod. SIVARON SS-80 - Waste discharge belt tss 45° mm. 2500 - Matr. 972842 - Year 1997 - Complete with CE declaration and manual

BOTTENE shaft mounted cut-off saw - complete with roller conveyor

Manual bench miter saw with mm blade. 350

H.I.T. NSM 250 RESAWING SAW WITH WOOD FEED FROM THE LEFT (LEFT-HAND MACHINE). The system was fully functional until it was professionally dismantled and dismantled. In addition to the resawing saw with side fabric capping, a model turner, an alignment and centering table and a splitter separation transport included. Specifications Cutting height: 40 - 240 mm Cutting width: 18 - 400 mm / 5-leg variable Width unedged: 750 mm Lengths: 2.50 - 14.00 m Feed: max. 60 m/min Swivel circular saws for side goods cutting with 2 x 7.5 KW motors Saw drive with 2 x 132 KW motors Errors in the information excepted.

met 13 meter invoerrollenbaan met digitale uitlezing Dia saw / abrasive - disk : 400 mm Turningspeeds: 10/20 m/min Weight: 1250 kg

cutting diameter: max 400 mm : mit Sägeblättern weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Graule ZS170N 3D - Tilt and pan controlled with Tigerdrive Manufacturer: Graule Type: ZS170N 3D Mach. No 2014/78/27 Year of construction 2014 Graule ZS170N Motor: 3 kW Saw blade: ø420 mm Axle: ø40 mm Saw height: 170mm Angle adjustment: 45 - 90 - 25° (controlled) Tilt: 0 to 45° (controlled) Sawing line: 450mm at 90°310mm at 45° rotation Saw blade: ø4204048 WZ Neg. (used) Machine stand: Included

Graul zs170N with 3 KW motor, wheel adjustment tilt front, or rear Machine stand, oil brake, printer, digital angle display horizontal and/or vertical

1994. 1996, 2004

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

SPECIFICATIONS: Saw blade spacing: max. 2800 mm Tilt: 0° - 90° Saw blade: Ø 350 mm Installed power: 2.2 kW x 2

Long-cutting saw for cutting aluminium profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Feed length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

SPECIFICATIONS: Workbench dimensions: 4000 x 500 mm Saw blade: Ø 450 mm Installed power: 5.5 hp

Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material tensioners Minimum quantity spraying device Powerful 5 KW motor

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Key data: 4300 mm

Angle system for panel splitting with a cutting length of 4300 mm and 2200 mm the system also has 2 lifting stations at the exit and a scrap wood divider cutter

Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg

Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible.

Sliding table saw ALTENDORF F 35 Type 3 - 1000-Exhibition-Machine-5.5 kW (7.5 HP), 3 speeds, Motorized height and swivel adjustment, Large protective cover, Double trolley 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, Cutting width 1,000 mm, Angle mitre stop 3,450 mm, without length compensation, Table top extension/table top extension:, With high-quality CDF surface---------- Technical data ----------Swivel range: 0 - 46 Â, Carriage length: 3,200 mm, Cutting length: 3100 mm, Cutting width: