loader used for sale

Loading caterpillar Hanomag D 600 functional, top engine

- year of production 2017 - hour meter reading 2770 mth - road lighting - Rear view camera - Work lights - 55 kW (75 hp) engine at 2200 rpm, 400 Nm torque at 1300 rpm - maximum lifting capacity 4000 kg - maximum lifting capacity at a maximum extension of 1250 kg - raised boom 13.78 m - hydraulic system pressure 260 bar -poppy. Pump flow 110 l - Torque converter, 4-speed powershift transmission - travel speed 29 km/h - servo-assisted service brake, hydraulic - Front work light - rotating warning indicator - Tires in very good condition - Electrical drive control - Front axle differential ratio - Windscreen and upper window cover -air conditioning -Leveling - 3 steering modes - on-board computer

Pallets are checked for damage

If you are interested, please write

Bar diameter: 25mm, max. bar length: 4200mm, with synchronous device, available in the end of 2023.

Max. bar length: 3000mm, weight: 900kg, the machine is wrapped in foil and not in use.

Motor power: 234kW, weight: 38t, operational hours counter: 25,323h, an inspection is possible.

Max. load: 5t, length: 2205mm, width: 550mm, height: 600mm, weight: 250kg, an on-site inspection is possible.

Rod diameter 65 mm rod length 3200 mm

IRCO Profimat 65.6/196.6

weight: 14 500 kg : . : DEUTZ 6 Zylinder Turbo : 45 km/h motor capacity: ca. 200 PS Number of working hours: 11 000 h : 20% : . : . : Erdschaufel ca. 3 cbm : Kranarm, Palettengabel : Bundeswehr The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

bar diameter 65 mm bar length 3000 mm

TECHNICAL SPECIFICATIONS Designation: Concrete ramp Version: mobile, 2-piece Weight: approx. 5 t per block Slope: 15° Transport dimensions per block (length/width/height): 4,470 x 1,200 x 1,000 mm SPECIFIC COMMENT - Mobile ramp system to increase the discharge height - Mudguards at the tips - Metal construction fixed to the blocks for securing

- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.

Number of working hours: 3336 h : 55kW/2400 rpm serial number: 8CU4465 bucket: Klappschaufel 0,75m³ : Gabelträger : . weight: 5630 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Was fitted on a Gildemeister Sprint 65

FMB turbo 5-42/ 4200 Year of construction: 1998 Version for 4m poles previously installed on a grape without syncron unit

LNS Tryton 112 Year of construction: 2004 Hybrid drum: 7/ 12 channels

Rod diameter 5-102 mm Rod length 1600 mm

Kettner Year of construction: 1987 Pallet magazine Control: Siemens S5 2 pieces : 3000 EURO each

- Rod length: 3000 mm - Total power: 1 kW - Machine weight: 800 kg - Dimensions (W x D x H): 4.7 x 0.5 x 1.3 m Details Guide tubes 10 and 25 mm, was mounted on an EMCO lathe ET242 Accessories Documentation

Key data: 5 mm, 3 mm

General: Year of construction 2013 Bar length 3.0M 3.200 mm Rod diameter 5 – 51 mm Overall length 4,060 mm Weight approx. 760 kg

- Guide channel in oil-damped design, - was attached to TRAUB mechanically - Installed guide channel D 28 mm - Material slider length N - max. bar length 3,200 mm - Centering device - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm

ID2982 Manitou MT1745 year/Year of construction 2004 approx. 7000 hours/hours Telehandler, with 2 outriggers, with fork telescopic handler, with 2 outriggers, with fork

3 pieces available : 2 new in 2017 (serial no. 174268-174269) 1 new in 2013 serial no. 173061 - all three barfeeds were fitted to Citizen L12

Description: • Serial number 2046 • Standard tires 29.5 R25 • Bucket width 3480 mm • Standards bucket capacity 4.80 m³ • Steering type AL • Maximum Speed ​​35 km/h • Maximum pouring height 3100 mm • Lifting power 264 kN • CUMMINS QSM11 engine: displacement 10800 cc, power 250 KW • Working hours according to meter 16500  ,  ,IMPORTANT: , , The customer is responsible for all the loading related to the equipment. , Dimensions and weights are approximate. , , Approx. Onsite Dimension. (l x w x h): 9,320 x 3,210 x 3,800 mm, weight approx.: 29,800 kg

If you are interested, please feel free to write

For more information, please write to

Inv. Num. : 5413 Type: SN 542 Producer: FEDEK Created: 2008 Parameters: Maximum bar length: 3000 mm Rod diameter: 42 mm Weight: 800 kg Length: 4000 mm Width: 1000 mm Height: 1500 mm

Description: Serial number: 156839 Bar length: max. approx. 1040 mm Approx. Onsite Dimension. (l x w x h): 2,100 x 1,900 x 1,350 mm, weight approx.: 400 kg

Description: Manufacturer: probably EBOSA Max. bar length: approx. 1000 mm Approx. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 1,550 mm, weight approx.: 400 kg

Manufacturer: Sameca Type : MUZ.6.6 Year of construction 1996

We offer you Iseki compact tractor TH 4632 AHL from a current recycling. Year of construction 2020 (registration date 22.10.2020) Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 82407 Wilzhofen The sale is without warranty Subject to prior sale

Number of axles: 3 St. length: Ladefläche 10200 m total wight: 30.000 t axis load in front: 10.000 t axis load in the back: 20.000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ident-Nr.: CAT0906MKH6603880 Weight: 5600 kg bucket: 1 CBM : Stunden : 80 % quick coupler: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Battery voltage 24 V, capacity 320 ampere-hours, battery weight 255 kg, battery delivery date 2015, bucket width approx. 880 mm, with charger Approx. Onsite Dimension. (l x w x h): 2,600 x 1,000 x 2,300 mm, weight approx.: 3,000 kg

Description: Bucket width 2000 mm, depth 1000 mm, height 1000 mm Approx. Onsite Dimension. (l x w x h): 5,000 x 2,000 x 2,800 mm, Blade width: 2,000 mm, weight approx.: 15,000 kg

Description: Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 1,100 mm, weight approx.: 350 kg

Description: Operating hours: 1,124 First registration: 01.01.2021 Fuel type: Diesel Engine power: 42 kW Upholstery/color: Synthetic leather/black Gearbox: Automatic Number of keys: 1 Equipment: Floor planner Pallet fork Shovel Front left tire damaged Approx. Onsite Dimension. (l x w x h): 3,400 x 1,500 x 2,200 mm, weight approx.: 4,500 kg

Bar loading magazine for multi spindle automatic lathe Schütte SG18, factory new Special offer! Test phase on your machine in D/A/CH/BeNeLux possible! Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Schütte SG18 Type: DBM 21/36 Design: lateral loading magazine / integral loading magazine Yob: 2021 length of bars: 33000mm Total length: approx. 3680mm Bar stock: approx. 680mm Optimized loading time (modification to Schütte may also be required) 12-14 seconds (total loading time). There are several pieces brand new and immediately available. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Loader for centerless grinders L = 4m motorized The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools

Very rare to see a G90 on the market ! This Probat with a 90kg capacity per batch has been manufactured in 1967 and refurbished by Giesen in 2010, since then it continued to run like a workhorse until a couple year ago when it was replaced by a new machine. It is now ready to ship and to work. The setup includes a destoner and a green coffee loader. Computer connection to work with Artisan or Cropster The propane gas burner is connected to a thermoregulator allowing to reach various set temperatures in a defined time but you can also work manually by activating the burner at 1/3, 2/3 or 3/3 of its full power. This fantastic roaster has always worked great and it has been maintained every year by a Probat agent. It hasn't lost more than 200ml of gear oil in the last 8 years of use. If you are not familiar with this particular type of investment, please note that it do ...

Automatic feeder GEA, type Shingle Loader 600, 3-lane insert, without line distributor,, for format 2.3,, 2 buffer sections, 3 insert portions on the belts,, knife edge tape,, removed, is dry in storage.

designed for powder, made by stainless steel, with pneumatic filter cleaning, with external suction blower, function tested

Engine Brand: VOLVO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: No Flywheel , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 310 Kw, Rated Speed: 2000 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/203038, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D13J; Transport weight [kg]: 1280

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one setup. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be ground automatically and in one pass. Accessories: Handling system for saw blades ND 230 including data input station and 3 loading trolleys Loader ND 230 Full cladding Saw positioning device, Automatic central lubrication, Wet grinding device, Extraction, Halogen lamp, 1 saw blade mounting bolt including magnet holder Oil collecting tray, Circular saw blade diameter without robot: 80 -840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: with robot from 10 -180 mm, Circular saw bore diameter without robot: from 10 mm, Circular saw bore diameter with robot: with robot from 10 -180 mm , Sheet thickness without robot: up to 14 mm, Sheet thickness without robots: up to ...

Description: This forward-looking rotor blade ensures a fast and clean implementation of compost and other bulk materials. The material is taken up like a conventional wheel loader shovel. At the dispensing point, the rotor is started by means of the automatic control. The hydraulic rear panel pushes the material evenly to the rotor in dependence on the rotor speed. The opposite rotor mills off the bucket contents, whereby it is well mixed and loosely dropped. Optimal conditions are thus created for the composting process. Clumps and compactions are reliably dissolved and a well-mixed bulk material is produced. Advantages of using the meetra rotor blade: 1. - Maximum area utilization 2. - Excellent material mixing and loosening allow shortest dwell times 3. - Maximum annual throughput, as regardless of plant length and width 4. - Composting allows for trouble-free rotting c ...

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600 Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500 Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250