loader used for sale

Used cnc machining center SuperMax YCM-V85A control FANUC Series O-M used machining center Brand: SUPERMAX Model: YCM V85A Year: 2001 CNC: FANUC Series O-M Head motor: 5.5kw ISO40 Speeds: 45-8,000rpm Travels (X, Y, Z): 860mm, 440mm, 630mm Table: 950x400mm Maximum table load capacity: 500kg Speeds: 12m/min. The tool loader does not work and is disabled. The hub works fine but without the tool magazine option. It is delivered with a computer for connection to the machine. Includes tools seen in pictures.

Distance between centers: 800 mm Max swing over bed: 920 mm Max swing over slide: 745 mm Ø bar passage: 66 mm Speed: 4000 rpm Year: 2016 Equipped with: Control: FANUC Series 32 High pressure pumps: in spindle and sub-spindle Chip conveyor: Yes Presetter: Yes Arm of piece extraction: Yes Automatic bar loader LNS SPRINT 565 S2: Capacity Ø5-Ø65mm. Length 3000mm

Complete with SCHMID LM 3200 bar loader Spindle passage 51 mm Turning length 280 mm Control SIEMENS, SINUMERIK 840 C INDEX control, C 200-4 Travel x1 90 mm Travel z1 280 mm Travel x2 81 mm Travel z2 80 mm Max spindle speed . 6300 rpm Rapid traverse Rev. 1 24/24 m / min Rapid traverse Rev. 2 16/24 m / min X / Z axis feed force Rev. 1 5500/5500 Nm X / Z axis feed force Rev. 2 8300/5500 Nm - Revolver 1 for 7 tools + synchronous spindle - Revolver 2 with 6 tool places - 4 rear drilling stations (1 of which guided) - C axis

Complete with Lns Quick Load Servo Iii bar loader Max Distance between Tips mm. 970 / Min. mm. 210 Max Turning Diameter mm. 190 Main Spindle: Spindle Nose (Asa Attachment) Asa A2-6 Spindle speed (Min./max.) Rpm/min. 4,500 Spindle Motor Power Kw Kw. 11/15 Bar passage mm. 65 Counter spindle Spindle Nose (Asa Attachment) Asa A2-5 Spindle speed (Min./max. )g./min. 5,000 Spindle Motor Power Kwkw. 11/7.5 Bar passage 51 mm Number of upper turrets 2 Number of Lower Turrets 1 X Axis Travel mm. 167.5 Z Axis Stroke mm. 250 Y Axis Travel mm. 102 X Axis Travel 2mm. 167.5 Z Axis travel 2mm. 250 Y Axis travel 2mm. 102 X Axis Travel 3mm. 167.5 Z Axis travel 3mm. 685 Fanuc 16i-tb control Dimensions W D Hmm.3.930 X 2.270 X 2.110 2 High Pressure Pumps Paper Filter Conveyor Finished Pieces External mat Weight 12,000 kg Year 2004

Z1 axis travel (mm) 230 Bar passage (mm) 20 (25.4) Maximum main spindle speed (RPM) 10,000 Main spindle power (Kw) 3.7 / 5.5 Number of tools for machining on headstock 14 Number of radial driven tool holders 4 Number of axial driven tool holders 4 Maximum speed of driven tool holders 10000 Operations on counter spindle Bar passage (mm) 20 (25.4) Maximum main spindle speed (RPM) 10,000 Main spindle power (Kw) 3.7 / 5.5 Number of tools for machining on headstock 8 Number of radial driven tool holders 4 Number of axial driven tool holders 4 Maximum speed of driven tool holders 10000 General characteristics Number of linear axes 6 Rapid movements (m / min) 30 Weight (Kg) 3000 Installed power (Kva) 14 Fanuc 31 control i TORNOS ROBOBAR SBF – 532 bar loader

TORNOS DECO 2000 10 CNC automatic lathe IEMCA GENIUS 112-32 bar loader Total number of axles 5 Maximum workpiece length 60 / 90 mm Max. bar diameter 10 mm Spindle revolutions: with continuous variator from 0 rpm to 16000 rpm Spindle positioning increment 0.1 ° Independent slide: (X1-Y1) Position number 4 Independent slide: (X2-Y2) Position number 4 Connection 50 Hz 3x 400 Volt Spindle motor 3.7 kW Machine dimensions: Length 1600 mm Width 1000 mm Height 1800 mm Different accessories: Maximum bar length 3200 mm Bar diameter 2 - 26 mm Year 2001

complete with IEMCA BOSS 552 HD bar loader for 4 m bars High pressure CNC Fanuc 31 IModelB5 Number of axles 7 axles Diameter 38 mm Rated power 2 kW, 4 kW Total length 2,740 mm Total width 1,315 mm Total height 2,120 mm Weight 4,300 kg Prompt delivery Visible under power Year 2016

Automatic tube cutting machine using a SIMEC saw cutter, Mec 120 M CNC model, designed for cutting metal or non-ferrous tubes with a diameter of 12 mm minimum to 100 mm maximum, round, square or rectangular section. Managed by Siemens S7 automaton and industrial PC with Galiléo” software with calculator and cutting optimization (angle or straight). Automatic loader, inclined plane type for bars up to 6.5 M Automatic feed by feed clamp driven by brushless motor: speed: 1M/s Automatic head rotation + - 60° for angle cuts Unloading of cut pieces (max: 2000mm): 2 positions

Complete extrusion line for the production of PP and PS films, produced by Battenfeld-cincinnati GmbH 2012 release, Designed for the production of films of polypropylene and polystyrene. equipped with a loader Moretto Main technical characteristics: Extrusion line: Possible materials for processing PP and PS Max. film width 850 mm Film thickness 300 ÷ 2000 microns Productivity 400kg / hour Gross weight, kg 18 138 kg 2nd position winder: Max. film width 1000 mm Max. diameter of winding is 1400 mm Pneumatic winding shaft diameter for 152 mm (6 ’) sleeves To operate the equipment, a three-phase AC network is required, compressed air with a pressure of 8 Bar, water supply.

Total impression count 90mio, Accessories included:, - PRESET PLUS feeder and delivery, - Steel plate on feeder and delivery with ramp (for plastic or wooden pallets), - Stream feeder with belt, - Electronic double sheet detection, - Electromechanic double sheet detection, - Electronic side lay control, fotoelectronic and akustic, - Anti-static on feeder and delivery, - Alcolor continuous dampening system with Technotranss alcohol metering; cooling and re-circulation unit system, - Preset (autom. paper size and thickness setting), - Press Center touch screen consolle and diagnosis; self diagnostic;Remote inking; dampening; axial, circumferential and diagonal register control with light pen; day light illuminator and cassette or memory card for job memories), - Programmable automatic blanket cylinders wash up via Prinect Press Center, - Programmable automatic impression cylinders wash up  ...

CNC turning lathe Brand: DMG Mori Model: MSL 60 Year of manufacture: 2010, Bar passage: 60 mm, C axis, 7 axes, Sub-spindle integrated in main turret for second operations, 2 turrets, Stationary tools on comb head, Battery tools second operations, Possibility of 4 tools machining simultaneously, CNC: Fanuc 31i, Main motor: 7.5 kW, Main spindle speed: 5000 rpm, Bar loader interface, Parts collector, Main clamp holder and secondary integrated head, Inspectable by a qualified technician, working

Goodway Model GLS 2000 Motorized Lathe, Complete with hand piece unloading, bar feeder interface and Iemca loader mod. Boss 552 HD 3 meters Machine in operation at our customers site, machine in excellent condition Government Unit: Fanuc OI Maximum Workable Length 1 Capacity: 500 mm Turning diameter: 310 mm Bar passage: 51 mm Spindle holder: ASA 6 Main Spindle Spindle Speed: 4200 rpm Turning Spindle Power: 15 Kw Motorized speed: 4000 rpm Motorized power: 3.7 Kw Chip conveyor: Yes on the whole

We sell a factory for the production of PET containers. Brand: TEREKAS (Litva) Model: TFA-3 Release year: 2006 Productivity: 3100 bph Power: 50 kW Rated Power: 30 kW Kit: blow molding machine TFA-3 Airpol compressor station high pressure compressor booster dehumidifier chiller 2nd high pressure tanks preform loading manipulator preform conveyor preform hopper preform loader molds (7 sets)

turning diameter: 140 mm turning length: 170 mm control: Mitsubishi Meldas 635 spindle passage: 42 mm : 140 mm turning speed range - grinding spindle: 80 ~ 8.000 U/min drive capacity - spindle motor: 11 / 7,5 kW : 0,001 ° spindle bore: 55 mm A-Axis: turning speed range - spindle: 60 ~ 6.000 U/min drive capacity - spindle motor: 3,7 / 2,2 kW : 42 mm : 2 pos turret (x-stations): 12 : 2 x 12 pos : 45 ~ 4.500 min -1 Turning Speed of the Rolls: 1 kW rapid traverse X-axis: I 24 m/min rapid traverse X-axis: II 18 m/min rapid traverse X-axis: III 20 m/min rapid traverse Z-axis: 24 m/min total power requirement: 14 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,4 x 1,6 x 2,0 m - CNC control Mitsubishi Meldas 635LCC - Collet holder for main spindle - Pick-up spindle - Collet chuck holder for pick-up spindle - Pick-up spindle indexing - 2 12-position turrets with driven tool ...

Fork for skid steer loader many more shovels and spoons available! , Condition state: Sufficient (condition state 3)

The price is for the entire, complete line. It is possible to purchase individual devices separately. Used KRONES carbonated bottling line - capacity: about 7 000 bottles / h - Bottle formats: 330 ml, 500 ml, 700 ml, 750 ml, 900 ml, 1000 ml - The line worked with cider, sparkling wine and champagne. - Possibility of bottling beer in a returnable / non-returnable bottle - Possibility to check, run the line before purchase. Available on hand. The line includes: 1. bottle unloader for returnable bottles Kettner 1989 ( Kontipack E). 2. returnable bottle washer Krones 1988 Type 150/10-110 3. filling machine Krones VKV40/SV10/KK from 1988 - 40 pourers with ALCOA capper 4. capper Krones 5. bottle capper ADELSKI PP2010, 2007 (Adelski). 6. manual capping machine 7. installation for Velcorin 8. machine for putting on wire (Nortan, Minerva 80-120, 1995). 9. machine for app ...

The price is for the entire, complete line. It is possible to purchase individual devices separately. Used STORK 0.75 l non-carbonated bottling line - capacity about 8 000 bottles / h - Bottle formats: 750 ml - The line bottled non-carbonated/quiet wine hot. - Possibility to check, run the line before purchase. - Available on hand. The line includes: 1. bottle unloader for returnable bottles Kettner 1988 (Konti- Auspacker). 2. label ripper 3. returnable bottle washer Krones (KES 1-3-212, 1992) 4. soda lye detector (Michael Horst, miho LC2000 5. Stork pouring machine (VD48/8, 1978), 48 pourers 6. AROL -SATURNOR12T600 capping machine, 1991 7. Rolex automatic sealer (type: SWK-800, 2001). 8. plate pasteurizer 9. manual pressing machine 10. banding machine (KRONES, Taxomatic, 1995). 11. bottle crate loader (Kettner, Konti- Einpacker, 1988) 12. conveyors 13. cont ...

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer

Description: Fabrication number: R3GL9012 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 27 A Control unit: FANUC SERIES 21-T Turning length: approx. 500 mm Travel distances: Z: approx. 300 mm X: approx. 300 mm Incl. 10-position tool turret Attention: the tool holders in the tool turret are not included in the scope of delivery Tool holder: VDI 30 Incl. bar loader from the manufacturer KUPA Type: 42R weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,900 mm

Code: 0233 Brand: MCR - ITALY Model: EASY EDGE/5 - CE Standard Automatic edge bander for edging panels, veneer edges, PVC, solid wood, abs, etc. - CE Standard Technical data: Max edge thickness mm 5 Max panel height mm 80 Min panel height mm 10 Min panel width mm 80 Adjustable feed speed Composition: Gluing unit: Heat regulator glue tank - Heat regulator roller - Automatic strips loader End cutting unit consisting of 2 motors of 0, 37 kW - Blade diameter mm 125 - Blade inclination Fine trimming unit :allows the trimming of the top and the bottom of the applied edge - 2 motors Kw 0,37 - N° 2 combined Vidia cutters with inserts to 30° plus flat sharp Polishing unit - N° 2 motors - Brush diameter mm 160 Control panel Sound-proof cabin Total absorption A 10 Overall dimensions mm 3100 x 1000 x 1640 h Weight kg 950

Control: FANUC Number of axles: 7 Complete with IEMCA GENIUS 118 bar loader Main spindle: - Max. diameter bar: 12 (15) mm - Maximum speed rpm: 12,000 - Driving performance (S2: 30 min/ S1) kW 3.7 / 2.2 Spindle counter: - Maximum turning diameter: 12 (15) mm - Maximum speed rpm: 12,000 - Driving performance (S2: 30 min/ S1) kW 3.7 / 2.2 Aces: - Maximum rapid translation of the axes m / min 40 - Maximum acceleration of the axes m / s2 10 - Translation path X1 (linear) / Y1/ Z1 mm 30/ 195/ 120 - Translation path X2 / Y2 / Z2 mm 180/-/ 180 Tool holder trolley 1: - Tool holder system: linear - Number of fixed/driven tools: 5 / 4 - Cross section of the joint for fixed tools: 10 x10 mm - Drive power for driven tools (S3 40% / S1): kW 1.1 / 0.55 Tool holder sliding carriage 2: - Tool holder system: linear - Number of fixed/driven tools: 8/ 5 - Cross se ...

Fanuc CNC model Version of the CNC 18i - TB Main spindle power 3.7 Kw Main spindle bar passage 20 mm Headstock stroke (Z1) 210 mm Number of revolutions of the main spindle 10000 Number of linear axes 5 Number of fixed tool places on the tool holder plate 6+4+5 Number of motorized tool places on the tool holder plate 4 Linear axis rapid feeds X Y Z 32 m/min Counter spindle yes Number of counter spindle revolutions 8000 Power against spindle 2.2 Kw Bar passage 20 mm Counter spindle Z stroke 210 mm Counter-spindle driven front tools 2 Number of fixed rear tools 4 Coolant used neat oil Model and brand of Iemca 332 E/R bar loader Length 2000 mm Width 1200 mm Height 1800 mm Weight 2580 kg

complete with TOP AUTOMAZIONI RES 442 bar loader BAR DIAMETER 38 mm No. of axles 6 Guide bush yes Convertible operation without guide bush YES Maximum stroke 320 mm Maximum stroke without guide bushing 70 mm/2.75 Tool positions (std/max) 29/42 Driven tool positions (std/max) 15/26 FANUC 32i-B control Main spindle speed 200 – 6,000 rpm Secondary spindle speed 200 – 7,000 rpm Live tool speed 6,000 rpm Main spindle motor 7.5 / 11 kW Weight 4,850 kg Dimensions: W x D x H 2,240 x 1,515 x 2,050 mm 88″x60″x81�

Enveloping line KERN K40-15 is designed for film packaging of magazines, books and other similar printed products. The K40-15 is an extremely flexible system that can be easily and quickly set up to work with products of the required format. The system is able to work with great efficiency. The maximum capacity of the line is 15,000 pieces per hour. Design. The line has a modular design, including: - continuous log loader (ASH module); - main feeder (SHTH); - main conveyor (modules FM2 and FMB); - FPO cover opening (lifting) module; - two additional attached feeders RS341; - film insertion module K40-15; - culling module; - product flip module; - label sticker module; - stacker; - output conveyor

- Platform scale for the weight of raw coffee; - Pneumatic loader for raw coffee, with collection tank for 60 kg green coffee; - Vittoria semi-automatic roaster; roasting capacity per cycle: 60 kg. Cycle duration between 15/17 minutes. Electric panel, toasting cycle control with automatic unloading. Probes for temperature detection and the possibility to set and adjust the roasting curves; - Opening toaster by compressed air control as well as emergency opening always controlled automatically for operator safety; - Roasting drum internally connected to a water outlet, for fire safety, which can be operated automatically or manually; - Methane burner; - Film maker with continuous film expulsion system; - Baltur smoke burner; - Cooling tank with safety grid protection and suction circuit; - Electro-pneumatic stone remover with silos, complete with suction fan; - Stone removal sil ...

The machine is in good technical condition, testing possible upon agreement. Lathe with gantry loader. 2 spindles - 6” chucks (165 mm), 2 V12 turrets, 2 workpiece loaders, pick-up stations, 2 Pneumotec workpiece reservoirs, 18 chip ejector positions, OSP-U 100L control system.

Type: LFS 12 - 2SP Parameters: Manufacturer: Okuma Year of production / SO / GO: 2001 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Lathe with gantry loader. Technical parameters: 2 spindles - 8 ”chucks (210 mm), 2 V12 turrets, 2 workpiece loaders, catch stations, 2 Pneumotec workpiece magazines 18 positions, chip ejector, control system OSP-U 100 L. technical datas max turning length [mm] 70 max swing over saddle [mm] 200 max speed [rpm] 6000 rapid feed [m / min] 24/24 (X / Z) max main power [kW] 11 number of tools [piece] 12 + 12 tool clamping system direct recording. length [mm] 2,500 large [mm] 2.084 High [mm] 3.080 weight [kg] 5,000.

weight max. in kg: 1150 kg fork length: 1150 mm stroke height: 1350 mm high: 1620 mm weight of the machine ca.: 450 t dimensions of the machine ca.: 1,6 x 0,78 x 1,62 m Transportable forklift, self-loader. see pictures and videos The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser for cutting pipes and profiles ADIGE LT 722D is in good technical condition. By agreement, it is possible to see under the current. It can cut open and hollow profiles up to a length of 6500mm, with min. 10mm max. diameter 120mm. Automatic unloader for processing products with a length of max.: 4500 mm with the possibility of sorting products. Cooling equipment, extraction equipment, documentation for the machine. Regular service and prescribed maintenance. Operating hours Status 01/19/2024 – Computer: 87,001 h; High Voltage: 80.260 h; Counter: 81,444 Machine weight: 9000 kg Laser power: 2500 W Max. workpiece weight: 100 kg Pipe size max.:: D 140 mm Size of profiles min - max.:: 30x20 - 120x80 mm Automatic loader for processing bars with a length of max.: : 6400 mm Machine dimensions lxwxh: 10514x4600x2237 mm

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE - X= 2400mm ; Y=650mm ; Z=1000 - N.2 heads type T2 - Spindle power 7.5Kw - rpm 0 - 18.000 - Max/min pieces length 150/2400mm - Loader type CSF2 - Year 2002 - s/n AB004 - Complete with manual and CE declaration

max. wheel diameter: 130 mm gear width: 25 mm max. module: 4 min. module: 0,5 Control: Siemens 840 D strokes - infinitely variable: 500-2500 Hub/min stroke: 30 mm work-spindle diameter: 85 mm total power requirement: 49 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 6,4x4,5x4,4 m Counterhold without center hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Blow Molding Machine SMI SR10HP year 2015 Firstly the SMI SR10HP produced in 2015 emerges as an advanced solution for PET container production This analysis aims to detail its technical specifications and operational features It significantly highlights the machine s efficiency and productive capacity in industrial environments Productive Capacity and Versatility of the Blow Molding Machine SR10HP Importantly the machine achieves a remarkable speed of 17 000 BPH showcasing its high capacity It adeptly processes a variety of container sizes including 0 20 L 0 33 L and 0 6 L thereby offering considerable flexibility in production lines Configuration and Components Moreover it boasts ten cavities for simultaneous preform processing which optimizes production time Integrated systems such as a loader tipper and unscrambler automate preform handling Consequently these systems minimize man ...

SECOND-HAND AUTOMATIC LATHE LOCATELLI MOD. MK CE 1200 - n. 3 hydraulic carriages - working length 1200 mm - with loader - n° 3 gouges

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

NC sliding headstock lathe Star SE 16 FMB Minimag bar loader high pressure coolant pump, Control: Fanuc 21i-TB

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks, each with a stack height of 250 mm,, Device for automatic chamfering (smallest sawblade diameter: 100 mm),, Automatic threading of the grinding wheel,, Automatic central lubrication,, Coolant system 400 L with coolant tank,, Integrated machine light,, 1 mist extractor,, 1 set of operator tools,, 3 sawbalde pins for loader., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x 2015 mm, colour: blue/grey RAL 7047 / blue RAL 250-50-20 ...

Description: - Operating voltage: 380 V - Frequency: 50 Hz - Control voltage: 220 V - Rated current: 13.4 A - Clamping range: Largest material passage: Round: 25 mm - Hexagonal: 22 mm - Square: 18 mm - Largest material feed per circuit: 70 mm - Largest thread diameter for production with die and tap for brass and aluminum: M 16 - For free-cutting steel: M 14 - Work spindle: Speed range: 14 - 5750 rpm - Automatically switchable speeds: 4 - Number of high-speed speeds: 26 - Number of low-speed speeds: 234 - Turret head diameter: 120 mm - Turret working path: 60 mm - Adjustment: 30 mm - Distance between collet chuck and turret: 60 - 150 mm - Infinitely variable feed speed - Forward: 16 - 2800 mm/min - Back: 40 - 7000 mm/min - Rapid traverse speed: - Forward: 10 m/min - Back: 25 m/min - Cross slide: Clamping surfaces for tool holders of type Index 12 - 25 - Working path: 44 mm - Longitudinal ...

table surface area: 1400x1600 mm table weight: 12000 Kg b-axis: 0,001 ° x-axis: 2000 mm w-axis: 550 mm y-axis: 1800 mm z-axis: 1600 mm feed: 12000 mm/min rapid traverse: w-achse 6000 mm/min B-axis (table): 4 U/min bar material dia. max.: 110 mm spindle: 22/25 kW 0: 0-3000 U/min tool magazin:: 60 tool diameter: 125 mm tool length - max.: 400 mm weight of tools max.: 25 kg Internal cooling system: 20 bar range L-W-H: 7.100×6.200×3.980 mm weight of the machine ca.: 27000 kg total power requirement: 71 kW -Distance between spindle nose and table center 550-2,150 mm. -Distance between spindle center and table top 0-1,800 mm -Working feed of the X/Y/Z/W axes 1–6,000 mm/min -Number of areas 2 -Automatic tool loader -Double longitudinal chip extractor -Cross chip extractor -Portable steering wheel -Pickup rules The data for this ad was created with ModulMWS - the software solution of Logo ...

Code: 0241 Brand: HOLZHER Model: 1402 MF - CE Standard Automatic edgebander for wood, furniture, veneer, Abs, melamine, PVC, solid wood, and other materials - CE Standard Technical data: Edge thickness mm 0,3 - 3 Max panel height mm 45 Min panel length mm 180 Min panel width mm 60 Glue loader Double end cutter: N° 2 motors 0,22 Kw - Rpm 9000 Tilting trimmers: N° 2 motors 0,6 Kw - Rpm 18000 Brush unit: N°2 motors Kw 0,15 - Brush diameter mm 150 Protection cabin Compressed air Bar 6 Overall dimensions mm 3250 x 1220 x 1200 h Weight kg 680

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

Key data: 3200 mm, 12 mm, 170 mm

TSUGAMI BO12 (BE) SWISS TURN, 5-axis C+Y/12mm/ FMB loader magazine / CNC AUTOMATIC PUSHER, Control unit: FANUC LB1 Technical details BAR CAPACITY 3 mm to 12 mm, NUMBER OF CONTROLLED AXES 5 units. (X – Z1 – Z2 – C – Y) C-axis Y-axis Spindle speed feeder: 0 - 12.0000 rpm FMB Minimag 3200 / 3 meter bar feed / drive, German manufacture. Total weight of the machine with driver = 4,500 kg

Initial commissioning 2016, External drum platesetters for thermal offset printing plates 830 nm up to max. 930 x 1140 mm, incl. fully automatic plate feeder from two cassettes (Dual Cassette Loader DCL 106), inline die-cutter, Interplater 125 HDX online development machine, Prinect Shooter software model for the output of TIFF-B files, maintenance contract maintained, Price, delivery and installation on request

fully hydraulic wheeled excavator Liebherr 912, built in 1986 4 times twin tyres. 70 KW 6 cylinder Deutz engine. Rideable on the road. Additional hydraulic connections for chisels. Device is operational. Equipment : trench bucket, bowl gripper, 3 normal spoons in different widths. Total weight 18 tons (can be driven on a low-loader)

max. turning diameter: 33 mm max. turning speeds: 8.000 U/min Number of axles: 8 St. turning speed rotating tools: 6.000 U/min control: FANUC Dimensions (L x W x H): 4.020 x 1.850 x 1.925 mm machine weight ab.: 4.200 kg CNC Turning- and Milling Center | GILDEMEISTER - SPRINT 32 linear equipped with C-axis for mainspindle and counter-spindle and bar feeder Iemca Further information: - collet holder for main and pick up spindle - 5 position 16x16 toolholder for slide 1 - 3 driven tools on slide 1 with spindles ESX16 - drive for rotating tools slide 2 - 4-pos.tool holder diam.32mm for slide - 2-chip conveyor h=1100 mm - pneum. ejector and unloading system with belt -pneum. - cleaning system for counterspindle¬ - collet - Mechanical preparation for oil mist filter - electr. and software preparation for bar loader – synchronization between main and counter spindle - constant cutting spee ...

SMD placement machine, manufacturer: SIEMENS, type: SIPLACE D1, year of manufacture: 2008, max. placement capacity: 15,000 h/h, max. staging capacity: 90x8 mm component feeding lanes, 12 segment collect and place head (2023/2024 refurbished), PCB size for single transport: 50x50 mm to 460x508 mm, pipette changer, waffle pack changer, single magazine loader NUTEK NTE0710LM, year of manufacture: 2008, serial no.: 2008-0490B01, single magazine unloader NUTEK NTE0710UM-FW, year of manufacture: 2008, serial no.: 2008-0490C01, PC, Keyboard and Mouse, Monitor

Description: Machine number: K1216/1018 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 23 A Connection: 8 kVA Control: FANUC Travels: X: 62 mm Z: 200 mm Y: approx. 200 mm Travel X turret 2: approx. 550 mm Travel Z turret 2: approx. 100 mm Max. Bar capacity: 16 mm Incl. 4-fold drive for driven tools With a total of 18-fold tool turret Tool shank: 22 The machine is equipped with oil cooling and a bar loader from the manufacturer FMB Type: TURBO 2-18 control: FANUC, Approx. Onsite Dimension. (l x w x h): 7,000 x 1,100 x 1,700 mm, weight approx.: 2,500 kg

Description: - Maximum bar capacity: 32 mm - Spindle bore: 37 mm - Maximum spindle speed: 8,000 rpm - Headstock stroke: 390 mm - Bar feeder: IEMCA TS 560/40 - Installation dimensions bar loader: 6300 x 2000 x 12000 mm - Type: For single-spindle lathes - Maximum bar diameter: 70 mm - Maximum bar length: 4000 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,800 x 2,300 mm

Description: Circulation diameter over bed 923.8 mm Standard turning diameter 275 mm Max. bar diameter ,80 mm Travel of the 2nd headstock 1284 mm Spindle bearing inner diameter 140/85 mm Shaft height for square tool 25 mm Shaft diameter for boring bar 50/32 mm Tool shank diameter for tool holder ,26 mm Turret indexing time 0.25 s Max. speed of the driven tools 6000 rpm rapid traverse X and Z 30 m/min, B 20 m/min, Y 10 m/min, C 400 rpm With collet chuck, tailstock, tools on the tool turret, chip conveyor, 2 foot switches , Bar loader KURT BREUNING 80.1-3000, year 2010, machine number 1500003 Attention: technical data without guarantee turning diameter: 356 mm, Drehlänge: 1,298 mm, serial number: NL 251 HA 3894, turning diameter over slide: 755 mm, x-motion: 260 mm, y-motion: 100 mm, z-motion: 1,345 mm, C-axis simultaneously controllable: Yes, Integrated C-axis: ...

Description: Including the tools on the turret with LNS HYDROBAR bar loader serial number: 470,457, control: FANUC OT, toolchanger positions: 8, weight approx.: 1,600 kg, Approx. Onsite Dimension. (l x w x h): 7,100 x 1,600 x 1,800 mm