128,848 used machines on RESALE, but how to find them? Machine Search
Equipped with: hydraulic tailgate, spare wheel, side storage box, wabco air system, winch, BPW axles, lifting bed, forced steering steering, remote control, sunroof Auction-ID: A1-42012-57
KIOTI KL5510N – New compact tractor with front loader (built in 2025) • Manufacturer: KIOTI (Daedong) • Model: KL5510N • Year of construction: 2025 • Condition: New machine • Engine power: approx. 40 kW / 55 hp • Diesel engine • All-wheel drive Facilities • Enclosed comfort cab • Heating • Front and rear work lights • KIOTI KL5510N front loader • Front loader bucket • Hydraulic operation • Rear linkage • PTO • Farm tractor tyres • Comfort seat (new) Technical data (nameplate) • Manufacturer: Daedong Corporation • Type: T1a • Made in Korea Condition • New machine, unused • Immediately available • No signs of wear • Ideal for agriculture, municipal technology, farm and forestry Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7- ...
Giant compact hydraulic quick coupler, extra function, leakage line, tandem pump, free return, 3-pin plug 12v on boom, Ground bucket 110cm Auction-ID: A1-45424-22
under construction, incomplete. Auction-ID: A1-45411-5
under construction, concerns prototype, according to statement for € 80,000 worth of material incorporated. See attachment for specified information. The statement has not been checked for completeness and no rights can be derived from it. Delivered as shown in the photo, without any other parts not shown. Come to the viewing day to get a good picture. Auction-ID: A1-45411-7
under construction, incomplete. Auction-ID: A1-45411-4
in various stages of construction, incomplete Auction-ID: A1-45411-6
Massey Ferguson 50HX Backhoe Loader Type: Backhoe loader Manufacturer: Massey Ferguson Model: 50HX Serial number: 5443D0896 Engine brand: Perkins Engine power: 50 HP Fuel type: Diesel Cooling system: Liquid-cooled Gears: 8 forward / 2 reverse Maximum lifting capacity: approx. 1,600 – 2,000 kg (depending on configuration) Maximum digging depth: approx. 4 – 5 m (depending on backhoe configuration) Rear tyres: 12.4-24 or 13.6-28 Front tyres: 6.00-16 Approx. machine weight: 6000 kg Approx. dimensions (L x W x H): 6300 x 2400 x 3000 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-50
This is a showroom model, without battery. Further completeness / operation unknown Auction-ID: A1-45411-600
under construction, incomplete. Auction-ID: A1-45411-3
48V, in use as a demo model, equipped with internal charger. Without remote control. Including loading box 165L/ Auction-ID: A1-45411-1
Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.
Tipping bucket and pallet carrier included Auction-ID: A3-43510-12095
HS Yanmar engine. Fork and bin provided. Auction-ID: A3-43510-37048
-Drilling diameters : 200, 300 and 400mm -Quick change skid steer loader -Equipped with hydraulic lines -New Auction-ID: A3-43510-95
new track loader with quick release, lighting, ground key, auxiliary hydraulic connection Auction-ID: A3-43511-6438
The Front Loader Stoll is in mint condition. Lifting height 4.3m. Lifting force 3.4T. Euro coupling. Fits Case puma swb and New Holland T7.165-T7.225. The lot only includes the Front loader, not the tractor. Auction-ID: A3-43510-34092
Equipped with: Kubota 2cylinder diesel engine, 2x double-acting hydraulic valves, 1x pressureless return, bucket, rubber tracks, standing platform, adjustable walking speed, work lighting Auction-ID: A1-40134-174
blob:https://www.bobcat.com/a51f10ad-950c-4a50-be72-7a794f0a6fc2 Auction-ID: A3-43516-13166
Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-44885-29
blob:https://www.bobcat.com/a51f10ad-950c-4a50-be72-7a794f0a6fc2 Auction-ID: A3-43516-13167
as good as new broom with municipal mounting plate. Working width 240cm hydraulically lifting and swivelling. Auction-ID: A1-45733-11
Equipped with new battery Auction-ID: A1-40134-208
solid farm loader of the FTECH brand: Year of manufacture: 2018 Engine power: 18.5kw/ 25 hp diesel Hours: 312BH Drive: Torque converter drive with all-wheel drive hydraulic quick coupler with wheel loader mount - 1x Soil shovel 4.5m³ - 1x pallet fork mech. adjustable - Closed cabin - Heating incl. heating gnome 230V -etc. 800KG lifting capacity when fully folded incl. attachment pallet fork Auction-ID: A1-45733-29
lightly used snow blade with wheel loader mount. hydraulically swivelling Collision protection strip 240cm wide Auction-ID: A1-45733-25
Stable and immediately ready for use loading crane with forestry tongs and rotator suitable for tractor rear attachment and PTO drive. All hydraulic functions can be operated from the operator's cab. Support legs mechanically extendable. Item WITHOUT tractor! Auction-ID: A1-45733-13
Processing Capacity: Minimum bar diameter: 8 mm Maximum bar diameter: 80 mm Magazine capacity (MP version): 300 mm (inclined warehouse) Magazine capacity (P version): 700 mm (chain elevator magazine) Magazine capacity (F version): 2,000 kg bundle (belt magazine) Bar feed speed: Adjustable up to 500 mm/s Return speed: Up to 1,000 mm/s Maximum Thrust Force: Electronically adjustable (for thin or heavy bars) Thrust system: Brushless motor with digital drive Total length: Approx. 4,100 mm (for 3.3 meter bars) Width: Approx. 900 mm (varies depending on the type of warehouse) Bar axle height: Adjustable from 900 mm to 1,250 mm Total weight (empty): Approx. 1,100 kg – 1,300 kg Auction-ID: A7-44885-33
Track width 200mm, equipped with: squeezer bucket (1080mm), pallet board (1060mm), servo control, mechanical quick coupler, 2x double-acting hydraulic valve, 1x pressureless return connection, led lighting, Euro connection (60mm) Auction-ID: A1-40134-33
Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...
Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...
Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more inf ...
a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange
used
Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley
Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve
4 PCs. measurement and control cabinets with a swivelling frame and others with drawers and shrouds. Inside some with ventilation and with mounting plate. In frame door socket. Side panel with main switch. As Rittal IT units however incl. fittings. Size H/B/T 2000/800/550 The price is per measurement unit.
Robust rotary valve with inlet and outlet diameter 275 mm, drive via gear motor 0.25 kW / 35 UPM. Several identical locks available (Built between 2000 and 2007), very good condition, partly unused.
Gear Deutz 816 NEW Part number: 0405 4284 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm
Type 6202RS Thread diameter 8 mm Wheel diameter 43 mm Wheel width 15 mm Total length 40 mm
Div. Interchangeable wheels for the gearbox, C-axis table; B-axis milling spindle Drezahl
Various interchangeable wheels for the gearbox Speed...
Manufacturer: Samsung Model: Excavator Built: 2004 Dimensions ( L x W x H ): 1700 x 1950 x 2400 mm
Heavy-duty wheels, swivel castors, castors, solid rubber castors Outer diameter: 240 mm Bore: 30 mm Rubber thickness: 30 mm Quantity: 90 Sold as shown All information without guarantee
Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm
With a robust operating weight of 8,500 kg, the RB 85 offers greater lifting capacity and stability while maintaining the speed and efficiency of a road-ready machine. Operating Weight: 8,500 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP at 2200 rpm Max Torque: 340 Nm at 1400–1700 rpm Displacement: 3.6 L Hydraulic System: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 heavy-duty pneumatic tires Drive: 4-wheel drive (with optional differential lock) Max. Travel Speed: 28 km/h Max. Digging Depth: 3556 mm (depending on boom config) Cabin: Fully enclosed with ergonomic seat, climate control, and wide visibility Swing Speed: 9 rpm Attachment Interface: Quick coupler standard; supports hydraulic hammers, augers, grapples, and more
Blow-through lock, supply, cell lock, cell wheel lock, cell wheel lock, dosing lock used AZO Ltd. Type: Z100/2P Inlet approx.: 250 mm Height approx. 450 mm Cell wheel approx. 320 mm Cell wheel width approx. 250 mm approx. 8 cells Hole circle flange approx. 335 mm with suction filter Geared motor with variable speed LENZE 11.342.13.12 0.5 kW 3.3 to 50 rpm 220/380 V Total dimensions approx.: 1500 x 600 x 450 mm The lock was used in the food industry. Probably for transport and dosage of sugar. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
maximum number of results exceeded
please refine your search
1.000 € 
