133,549 used machines on RESALE, but how to find them? Machine Search
new all stainless steel discharging height ± 1.770 – 2.250 mm mobile
NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm
Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
Loading caterpillar Hanomag D 600 functional, top engine
diameter: 15 mm length: 800 mm = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Backhoe loader, multifunction device with engine damage otherwise good substance, new tyres at the rear
- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg
- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.
Kettner Year of construction: 1987 Pallet magazine Control: Siemens S5 2 pieces : 3000 EURO each
SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - sn 1656
Manufacturer: Sameca Type : MUZ.6.6 Year of construction 1996
Lifting height 21 m, 360° rotatable, lifting capacity 4.5 t, With fork and winch (without rope)
SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - 3 rollers - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - year 1996
Robotic top loader which is currently taking flow wrapped bars and placing them into the infeed section of an automatic cartoner (which we also have for sale)
An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.
bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.
Stock number: D1145, Litre: 1.9, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hopper vacuum loader, Motor: 0.8 kW - 240 Volt, Power consumption: 1 kW, Dimensions: H 451 x D 290 mm, Capacity: 15 kg/h, Working temperature: Max 35 °C, Noise level:
Stock number: D938, Loader, stainless steel,, Beritech type berilift., Chain type., Lifting fork with slit grip., For lifting/emtying of Vemag wagons., Total height 4100 mm., Variable tipping height., Estimated max tipping height 3250 mm., Material: Stainless steel AISI 304
Stock number: D1115, Loader, stainless steel,, GEA/Scanio type K16., For lift and unloading of max 1.000 kg. vats,, height of unloading 2500 mm., Outer dimensions D 1800 x W 2500 x H 3950 mm., Without safety cabinet., Material: Stainless steel AISI 304
Country of origin: Germany, L max mm: 3.2, Operating hours: 0
CONTROLS electronic controls DIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 600 mm total height: 1200 mm total weight approx.: 500 kg ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz Clamping range: 3-25mm Rod length: 3000mm
Cryovac BL14 Semi Auto bag loader 2020, Stainless, semi automatic bag loader, 1Ph
A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible.
Loading area length: 2.98 m, loading area width inside: 1.28 m, height of loading area inside: 50 cm, height of floor to platform 40 cm, gross vehicle weight 2000 kg, payload 1390 kg, 610 kg dead weight, total length 3750 mm
: ATR 3030 Hawker Life-Plus TC3-LP-10KW Smart Charger for Forklift Batteries 24 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer:Mechatronic Model: mWL 150 square Year of Manufacture: 2019 Weight: 1000 kg Electrical specifications: - Supply: 230 VAC, 50–60 Hz - Supply lead: 3 × 4 mm² L1/L2 (N) / PE - Control voltage: 24 VDC - Full load current: 32 A max - Fuse type: C32A High Inrush Find more here - .ucymachines/ Contact us at - sales@ucymachines
diameter: 3 - 16 mm length: 3000 mm = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Frame from JCB loader, axles, hydraulics.
Power: 360 kW (489.46 hp) Fuel Type: Diesel Dead weight: 20,800 kg Maximum load capacity: 5,200 kg Axle configuration: 6x4 Color: Red Equipment: HIAB 288 HYDRAULIC LIFT, RAILWAY UNDERCARRIAGE
Key data: 46 mm, 3250 mm
Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition
Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.
Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano
Operation unknown. Auction-ID: A1-41279-4
Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.
Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible.
ID3804 Merlo Roto 38.16 year/Baujahr 2010 9.670 hours/hours 12 t Incl. bucket, fork, and work platform incl. shovel, fork and work basket
Auction-ID: A3-46152-22019
A diesel side loader from the manufacturer Bulmor (formerly Jumbo) is available. Load capacity: 7000kg, load center: 700mm, lifting height: 4500mm, mast type: duplex, free lift: 1540mm, engine power: 74.5kW. Machine dimensions X/Y/Z: approx. 2250mm/5000mm/3000mm, weight: approx. 11000kg, operating hours: approx. 22300h. An on-site inspection is possible.
A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
200 € 
