loader wheel used for sale

24 months warranty Solid, movable stainless steel baguette long roller, mounted on a stainless steel frame with caps lock wheels Capacity: 50-1200 grams, 1200 pieces per hour Roll width: up to 75 cm on retractable felt rolling belt Mechanical adjustment of Ausroll properties Dimensions in cm: 97 x 68 x 155 (WxDxH) Height of the machine without frame: 70 cm, Engine power: 0,37 kW 380V - 3Ph - 50 Hz - 16A-CEE connector Weight: 250 kg Price without mobile base (table model): 4.890,-- net

MAK M20 Spares for sale. 1.Reusable Cyl Heads Bare-Pressure Tested Free From Crack:8-10 2.Piston With Groove With in Limit:8-10 3.Con Rod-Free From Crack, Wear Within Limit:8-10 4.Fuel Pump-Good Condition:8-10 5.Reusable Liners Wear Below 0.20mm-Free From Crack, Welding or any Damages:8-10 6.L O Filter-Good Condition:2 7.Water Pump-Good Condition:1 8.Lube oil Pump-Good Condition:1 9.Turbo Charger K54-Good Condition:2 10.STD Condition 6M20 Crankshaft, Within Std Limits, no Crack, no Ovality , Hardness Within Limits:1 11.Cam Shaft 6M20-Good Condition:2 12.Woodward UG-8 - Good Condition:2 13.6M20 Engine Block-Good Condition:1 14.Cam Shaft Gear & Crankshaft Gear-Good Condition:2 15.FLY Wheel-Good Condition 6M20:1 16.After Cooler-Good Condition 6M20:1

Pelessierpresse Hanau, for pressing wagon wheels on axle, gemaess pictures

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Swivel part ingenous from Walter type HU 150E Peak height is 150mm. Direct divisions via perforated disc possible. Division 1 -24 Haohtcz Indirect sharing is no longer possible, a worm wheel is missing. Use on fraes and drilling machines For more information on request, please note the photos. Special price

Capping machine incl. brushless motor with friction wheels, container diameter 10-100 mm, capacity maximum 25 cycles / min.

Wartsila VASA V32 spare parts and complete engine also. 1.Reusable Liners wear below 0.30mm – free from crack, welding or any damages:8-10 2.Reusable Cyl heads bare – pressure tested free from crack:8-10 3.Piston with groove with in limit:8-10 4.Con rod – free from crack, wear within limit:8-10 5.Fuel pump - good condition:8-10 6.Centrifugal filter-good condition:1 7.Water pump – good condition:1 8.Lube oil pump - good condition:1 9.Turbo charger 354-11- good condition:2 10.Cam shaft – 12v32 A BANK & B BANK-good condition:2 11.WOODWARD 723 card - good condition:2 12.12v32 engine block - good condition:1 13.CAM SHAFT gear & CRANKSHAFT GEAR- good condition:2 14.FLY WHEEL- good condition 12V32:1 15.AFTER COOLER - good condition 12V32:1 If you are interested in complete engine part, please inform accordingly. For your information in past, we have supplied Engine  ...

Automatic bagging line for open bags up to 50 kg, consisting of: Bag magazine with loader, filling station with scale Vollenda, bag belt, sewing machine Union Special and switchgear cabinet with SIEMENS S5 PLC. Prior use: Bagging animal food.

Type MTY 8-70 Grinding wheel motor 250 W. Sawblade diameter 80 – 700 mm. Diamant grinding wheel diameter 125 mm. Total weight 29 kg. Video: abc://abc.youtube.com/watch?v=kYPLaZZwVtA&feature=youtu.be

Feed chain wheels suitable for dimter DKV 5

CO2 laser Bystar 3015 4.4 Kw, Table size 1500 x 3000 mm, incl. changetable, without loader, without suction, Y.O.M. 2006 glass revision in November 2015 under power laser: 28,000 h power on demand

Wing Mixer Wing Wheel Low Speed Mixer Propeller Agitator Propeller Mixer Xylems Flygt Banana SR Agitator used Low speed, highest efficiency Slow-running Flygt agitators are used when large amounts of liquid need to be stirred effectively and optimally during the treatment process. The result is outstanding efficiency. Manufacturer: FLYGT Type: M18-11-4AL / Banana SR agitator Propeller diameter approx. 1800 mm Wing/propeller length approx. 850 mm Wing/propeller width approx. 420 mm Diving motor Flygt 4430.010 690/400 V; 4.8/8.3 A; 50 Hz; IP68 4.0 kW; 1405 rpm Slow running submersible motor agitators Application: - Activated sludge treatment, conventional treatment, oxidation trench - Water reservoirs - Ice-free keeping - Oxygenation in lakes and ports - Biogas production tanks - Wastewater agitator Total approx. 1800 x 1300 x 600 mm Weight approx. 290  ...

-Internal grinding spindle -Digital display HEIDENHAIN Centre height 100 mm Top width 450 mm Wheels ø 300 mm Table size 950 x 200 mm Longitudinal stroke 450 mm Spindle cone MK 5 Spindle speed continuously variable 40-650 RPM Table inclination +/-10° degrees Weight 1700 kg Dimensions 1570 x 1100 x 1400 mm

CO co² Bystar 3015 4.4 kW, 1500 x 3000 mm, table size incl. removable table, without loader, without extraction, BJ. 2006,. Glass revision in November 2015 Laser: 28.000 h Power: 50,000 hours

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

From exposition Quick handling with with efficient electro - hydraulic pump. Places the load in the comfortable and ergonomically correct working position. Automatical activation of adjustable stabilizers when lifting higher more than 400 mm. Provided with bartery power level indicator. Polyurethane wheels. Supplied weith single piston rod. Can also be operated manually. Lifting speed with / without load: 19 /15 sec. Capacity: 1000 kg. Lifting height: 800 mm. Steering wheel diameter: 180 mm. Fork wheels diameter: 75 mm. Truck weight: 169 kg.

Telescopic forklift/ off-road forklift with four-wheel drive and rotatable top car Manufacturer Manitou Type MRI 1640 Built in 2011 Top condition! Only about 4,500 hrs Expert opinion on obtaining a business run for road traffic! Type of drive : Diesel Capacity: 4,000 kg Load center of gravity: 500 mm Safety device/lasthebe limitation Weight: 13,000 kg Tyres: 4 x air 400/70 - 20 14 PR Lifting scaffold type : Telescope Lifting height: 15,800 mm Height: 2,970 mm Fork tin length: 1,200 mm Engine : PERKINS Steering: all-wheel steering, 3 steering types Hydraulic lines for attachments on the telescopic head with quick-release couplings Closed cabin with heating Two-part door Reversing warning signal Street lighting front+rear

Steel grinding machine steels; oscillating grinding machine Producers: REMA Type: SNS 07 Rpm: 1450 / 2900 RPM. 2-speed motor Left and right rotation Connection: 380V / 16A Power: 0.6 / 0.73 KW Wheel size: 175 / 20 mm Fully functional without coolant pump

Doppelschleifbock Manufacturer: FAMO Type: G-200 A Diameter of grinding wheel: 200 mm 0,75 kW 2800 RPM All information without guarantee

Inv. Num: 5234 Type: SPRINT 20 linear Producer: DMG GILDEMEISTER Generated: 2006 Parameters: Engine hours: 79172 h Switch-on hours: 50648 h Max turning diameter: 20 mm Maximum length travel in the X-axis: 35 mm Maximum travel Z-axis: 80 mm Maximum feed speed Axis X: 40 m/min Maximum feed speed Axis Z: 40 m/min Number of spindles: 2 pieces Maximum main spindle power: 5.5 kW Minimum main spindle speed: 1 1/min Maximum spindle speed: 10000 rpm Axle X2: 230 mm Axis Z2: 180 mm Maximum length travel in the Y-axis: 240 mm Counterspindle power: 3.7 kW Maximum counter spindle speed: 1 1/min Maximum speed of the driven tools: 1000 rpm Lathe length: 2275 mm Lathe width: 1300 mm Height: 1760 mm Weight: 2.6 t Facilities: Rod loader with magazine Conveyor Liquid cooling Technical documentation Full coverage of the work area

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...

Used shopping cart of the brand Wanzl type ELA 130 with original Wanzl wheels, child seat, foldable box storage and deposit system (Euro). Our used shopping carts are all checked for functionality, cleaned, exempted from advertising and refurbished. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Wanzl • Type: ELA130 • Basket volume: 132 litres • Condition: used/good • Dimensions (H x W x D): 102.9 x 59.5 x 102.2 cm • Weight: 25 kg • Wheels: 12.5 cm • Child seat • rear box storage • Coin deposit system • Original Wanzl Wheels • Space requirement per car: 18.7 cm • Space requirement per 10 carriages: 272 cm • Space requirement per 50 carriage: 1020 cm • Capacity parking boxes 3-row, length 5 m: 66 On request, you will receive the shopping carts with handles in your desired colo ...

BTS-1100L Bin Compactor With the BTS-1100L Bin Compactor for 1100, 770 und 660 Lt. garbage wheelie bins large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the container volume up to 75%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 75% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - No climb into the garbage container more - Base lifting plate ensures bin wheels are not damaged during compaction - Maximum safety standards with two hand operation - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine  ...

78 used shopping trolleys (155l) of the brand Siegel (now Wanzl) type SieWa Merkur Weekend 160 E2 with child seat and deposit system (Euro). Our used shopping carts are all checked for functionality, cleaned, exempted from advertising and refurbished. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Seal (today: Wanzl) • Type: SieWa Merkur Weekend 160 E2 • Color: red • Basket volume: 155 litres • Condition: used • Child seat • Coin deposit system • Crate storage • 4 steering wheels (12.5 cm) • Load capacity: 205 kg • Dimensions (H x W x D): 105 x 60 x 109 cm Please take a good look at our other advertisements. In addition, you will find on our homepage a huge selection of used and new (B-goods) shopping carts in all versions and always at an absolute discount price! Whether with child s ...

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark

4x NUMMERATORS STRAIGHT, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

1x NUMMERATORS STRAIGHT, FORWARD, BIG No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

PTC JTR-C Cold Water Trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... Bhdwvn8yff - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW JTR-C 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW JTR-C 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Empty weight: approx. 600 kg - High pressure pump: HPP - HD reel: fixed and manual or hydraulic with max. 1/ ...

No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

Tube filling- and closing machine for pre capped ALU tubes. Machines is fitted with a tube loader TZ101, Laetus coding device and various accessories. PLC: Siemens type Simatic S5. Output: 80 tubes/min.

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...

Precision surface grinding machine, grinding wheel size 50 x 400 mm, magnetic size 250 x 700 mm, grinding area 320 x 750 mm, electric-hydraulic controlled, very easy to the use, highly-accurate, coolant system + accessories. Flat Dresser across the plate with compensation.

PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only with version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW JTR-H 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions: 3,370 x 1,640 x 1,540 Cxombmv - Empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manually with max. 1/2" or 100 m. 3/8" hose (included) - Water supply ree ...

Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 280 K Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 40% ED at 280 amperes 60% ED at 230 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 105 kg Special accessories Display and wire automatic Age 6 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 12 kw pneumatic lid inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.210 x 1.130 x 1.770 mm (open lid : ± 2.630 mm) infeed height : ± 1.600 mm outfeed height : ± 720 + 20 mm + Loader for eurobins

Surface grinding machine. Magnetic chuck of 605x310mm. Longitudinal travel: 630mm. Cross travel: 350mm. Wheel diameter: 350mm.

High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...

Diosna spiral mixer SPV 160 AD with 2 telescopic boiler For up to 160kg dough per Pan Kneading tool made of stainless steel Includes two stainless steel bowls Timer with two watches Two speeds Friction wheel drive Condition: reconditioned; checked and cleaned

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane meters in maxi ...

High pressure cleaner PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Foerder quantity: 13-42 l/min. - Engine: Kohler Stage V Diesel 35hp/26kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/m ...

M. No. : 6064/11 6708 Equipment / Additional information: Working width: max. 550 mm Product transport: 5 pieces flat belts - transport elements Departmental equipment: 5 pieces breakout elements with blown air Speed: 1 - 165 m / min, infinitely adjustable Mobility: mobile with wheels and feet

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...