loader wheel used for sale

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

BOTTARINI'S COMPRESSOR - ROTARY 8 BAR OUTPUT 2000L/MIN. 827 HOURS OF USE Auction-ID: A1-45663-39

rims + tires 385/65R22.5 2 Wheels, 1 New, 1 Worn Auction-ID: A1-44895-5

external diameter: 420 mm internal diameter: 100 mm width: 5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fully functional - 3 wheels- horse tow - diesel- strong 3cylinder Kubota engine - pulls on 3 wheels so you don't get stuck - hydrostat - tilts hydraulically - tow bar - drag bar can be removed - seat damaged - drag bar of 200cm Auction-ID: A3-43507-10709

Data on the last photos Auction-ID: A7-45427-266

weight of the machine ca.:15 t

max. grinding diameter:160 mm stations:2 sanding width:30 mm total power requirement:0,37 kW weight of the machine ca.:100 kg dimensions of the machine ca.:520 x 520 x 1160 mm

4 cylinder, engine runs but not with starter motor Auction-ID: A3-43507-17014

GNB battery with automatic filling, blue spot, flash light, width lighting, roof with panzer glass Auction-ID: A3-43506-211

-Deutz agrotron 90 -6890 hours -2 DW valves -heating needs to be checked Auction-ID: A3-43507-17248

no. of working stations:1 Stück tool adaptor:1650 W revolutions per minute:2990 U/min total power requirement:380V, 2,7 A weight of the machine ca.:33 kg

no. of working stations:1 Stück tool adaptor:1650 W revolutions per minute:2990 U/min total power requirement:380V, 2,7 A weight of the machine ca.:33 kg

grinding wheel diameter:300 mm voltage:380 V total power requirement:1,5 kW weight of the machine ca.:310 kg dimensions of the machine ca.:1100x900x1250 mm

3-cylinder diesel - PTO PTO - fast and low gear - hydraulic tipper - up to 50km/h - work light - towbar - starts, drives and brakes very smoothly ideel for horse pasture or agriculture Auction-ID: A3-43507-10703

Party casters; number unknown; sitting in a large wooden crate which includes

Hydraulic brake valve Direct return Pto 540/1000 No documents Auction-ID: A3-43507-315

PerformTec 4 rim washer Max wheel diameter : 690mm Max weight per wheel : 25kg Feed watter temp: 60 degrees Forklift available Auction-ID: A3-43506-19093

Equipped with milling heads, attachment/mounting parts, gears and other milling material

Equipped with 3-Cil. \"Deutz\" diesel engine; 40 km/h; 60 hp; dualsplit; super creep gear; PTO: 540/1000 rpm; 2 double-acting hydraulic valves; depressurized return; adjustable tow bar; front weights 8 pieces; Auction-ID: A1-40133-64

Equipped with: 1x hydraulic double-acting valve front, pressureless return front, hydraulically suspended front axle, 5x double-acting hydraulic valve front, air system, air brake connection, ISO bus, hydraulic brake valve, load-sensing, air suspension cab, ad-blue, skylight, air conditioning, Auction-ID: A1-40133-6

Equipped with: PTO speed 540/750/1000/1400, 2 double valves rear, 2 double valves side right, estimated hours around 10000 hours Auction-ID: A1-40133-81

Equipped with 6-Cil. \"MWM\" Diesel engine; PTO: 540/1000 rpm; 2 double-acting hydraulic valves; hydraulic relevance; depressurized return; Tipper Knob Auction-ID: A1-40133-157

All 4 tires are virtually unused, TLS front axle suspension, fender control, pick-up tow bar, adjustable automatic tow bar, flow control on hydraulic valves, hydraulic car brake valve, isobus, track width 1800mm, air conditioning, 540/540e/1000 pto rpm, touchscreen, gps preparation Auction-ID: A1-40133-5

Equipped with 4-Cil. \"FIAT\" diesel engine; PTO shaft 540 rpm; 1 double-acting hydraulic valve; adjustable tow bar; new clutch fitted in 2025; Auction-ID: A1-40133-83

Case 745 xl ; adjustable tow bar! ; gearbox good no scratching; 540/1000 PTO; Auction-ID: A1-40133-96

Equipped with: Front weight, front linkage, front PTO, 1x double-acting hydraulic valve front, power connection front, thru-axles, adjustable K80 tow bar, hydraulic top link, suspended cabin, 4x double-acting hydraulic valve rear, load sensing, air system, air brake connection, Car comfort suspension seat, electrically adjustable mirrors, climate control, iso-bus connection, GPS receiver GPS sphere, radio, president, display, Engine: FPT NEF, 6-cylinder, Cylinder capacity: 6.7 L, Speeds: 540 / 540E / 1000 / 1000E, Hydraulics: Closed Centre Load Sensing (CCLS), Pump capacity: 121 l/min standard, 465L tank, Rear linkage: up to approximately 6,100 kg, Front linkage: ±3,700 kg Auction-ID: A1-40133-2

Tipper knob, hydraulic car brake valve, thru axles, flow control on hydraulic valves, 540/1000 pto rpm, Auction-ID: A1-40133-78

International 845XL; power steering; top pull bar; lower drawbar; kipperknobel; top link; Hydro brake valve! Auction-ID: A1-40133-231

International 743xl start running drive brakes lift/PTO working Auction-ID: A1-40133-229

Equipped with 3x double-acting rear hydraulic valve (1x electronic and 2x mechanically operable PTO speed 540/540E/1000/1000E 4 cylinder diesel engine with 105HP Dealer maintained user manual present equipped with air conditioning electronic rear linkage Auction-ID: A1-40133-17

Equipped with 6-Cil. \"John Deere\" Diesel engine; PTO: 540/540E/1000 rpm; 3 double-acting hydraulic valves; hydraulic brake valve; depressurized return; adjustable tow bar; lower drawbar; lifting device; fender control; front linkage; front PTO; 1 double-acting hydraulic valve at the front; \"Trima\" front loader with hydraulic quick coupler; additional hydraulic valve on front loader; 2 front-loading cameras with monitor; front axle sprung; Auction-ID: A1-40133-13

Suspended front axle, pick-up tow bar, top link, air brakes, hydraulic car brake valve, fender control, 4-point cab suspension, 50km/h, air conditioning, GPS, track width 2050mm, load sensing, 540e/1000/1000e pto rpm Auction-ID: A1-40133-4

Deutz Dx 3.60 starcab ; farmer; Auction-ID: A1-40133-230

Equipped with: CLAAS Arion 610 C, 4.590 h, air conditioning, cab suspension, series: A20, 4WD, front weight, double-acting hydraulic valves, 3-point rear linkage, tow bar, front tires: 380/85 R28, rear: 460/85, length 5.16 m, height 2.99 m, CLAAS TCE 15 T, Twin Command Electronic, 15 forward gears, 15 reverse gears, 3 groups, 5 powershift stages switchable under load, electro-hydraulic reverse on steering column, 40 km/h version, pick-up hook. (no license plate registration / no documents) Auction-ID: A1-40133-32

Features: Cab 4wd Deutz diesel engine Excavator bucket Quick change system CW30 connection Auction-ID: A1-40133-189

6-cylinder Perkins common rail engine with 6.6 L displacement (plus PTO and transport boat Air conditioning Air brake system (1 and 2 lines, pneumatic cab suspension ) 3 mechanical control units 4- Spigot speeds (switchable from the cab) Rear Tire Maximo 70% Front tyres Maximo 40% Göppel front hydraulics with 2 additional hydraulic couplings Retrofitted ISOBUS wiring harness Automatic pull jaw with 38 bolts Auction-ID: 04D-FJ1-2

Equipped with: 4WD, front linkage Cat 1, front PTO, hydr.valve front, cabin, heater, PTO 540-1000, Cat 1 rear linkage, 1300kg lifting capacity, 1 hydr.valve rear, free return, PTO, front tires 28x9.00-15, rear tires 14.5-20, beacon, 7 pin plug rear, air suspension seat, 16x16 gearbox, shuttle-shift. Auction-ID: A1-40133-186

Equipped with: leveling boom, hydraulic quick coupler (Eurosteel HCWG2), 4x4 drive, extra hydraulic function on boom, air suspension seat, sliding blade, 6 cylinder Deutz diesel engine, excavator bucket, work lights, side storage compartment Auction-ID: A1-40133-22

cab suspension, 540/1000 pto rpm, hydraulic car brake valve, pick-up hitch, thru-axles, with English registration documents available Auction-ID: A1-40133-35

Equipped with 6-Cil. \"Ford\" diesel engine; Range Command ABC + creep; transmission; PTO: 540/540E/1000; 4 double-acting hydraulic valves; hydraulic brake valve; depressurized return; adjustable tow bar; lower drawbar; fender control; 1 double-acting front hydraulic valve; Auction-ID: A1-40133-43

Unused, fitting Ifor Williams 5 hole pitch 155mm Auction-ID: A1-45424-103

Unused, fitting Ifor Williams 5 hole pitch 155mm Auction-ID: A1-45424-102

Atlas AB 1302 D wheeled excavator from 1977 in classic, robust design with twin tyres. Equipment: • Front dozer blade • Rear outriggers • Two backhoe buckets Simple and proven technology, suitable for earthworks, demolition and agricultural applications. Machine is functional, but last stood still for about 2 years; batteries and fuel are required for commissioning. Auction-ID: 04F-RBC-2

Serial: 318248 Dimensions: 950 × 700 × 1800 mm Auction-ID: A7-45181-7

Technical data & dimensions: • Manufacturer: Alois Praschberger Rolltechnik & Sport • Model: Monoski (serial no. 960135) • Seat width (inside): 32 cm (ideal for narrow hips / teenagers / petite adults) • Seat depth: 45 cm • Accessories: Includes original Superlite outrigger (crutch skis) for optimal balance and control. • Condition: Used, technically sound impression with high-quality suspension system. Auction-ID: A7-45427-7

• Fendt Favorit 512C all-wheel drive tractor • Built in 1998 • approx. 14,675 operating hours • 4 double-acting control units • Load-sensing hydraulics • Front loader consoles available • Cab with air-suspended seat • Technically in very good condition • Many parts renewed in the last 500 hours: • Engine wiring harness new • Turbo clutch new • New pre-feed pump • Injection pump + nozzles overhauled • Cylinder heads overhauled • Piston, bearings, tappets renewed • Water pump + hoses new • Oil cooler new • New straps • All oils and filters changed • Visually with signs of wear, but solid condition • Ready for immediate use Auction-ID: 04J-NLR-1

ATTENTION! Vehicle is in Poland but can be brought to BE by seller for a fee! Auction-ID: A3-43510-13054

Including: N° 2 mobile metal tool racks Estimated weight: 80 kg Approximate dimensions: 800x800xh1500 800x800xh1500 mm Auction-ID: A7-44996-125

Three-phase asynchronous motor, 2800 rpm, 220 V.Serial: 143 Estimated weight: 75 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-44996-146