131,077 used machines on RESALE, but how to find them? Machine Search
SPECIFICATIONS: 06 columns height: 2500 mm - base 800 mm 012 Truss length: 1000 mm
Key data: 500 KG, 2800 mm, 2500 mm
3 ladders 3 shelves 6 steel panels 1100 mm deep
Key data: 500 KG, 2800 mm, 2500 mm
2 ladders 3 shelves 6 steel panels 1100mm deep
Not tested; Auction-ID: A7-46458-214
Offer 25080 Sliding - panel shelf with 10 movable material stands Specifications: - Stand - compartment dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / installation area 180 mm - Max. load capacity per compartment 2000 Kg - Slide-in bracket bracket - Track rail L 4750 mm - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg
Key data: 500 KG, 2800 mm, 2500 mm
2 ladders 4 shelves 6 steel panels per shelf 1100 mm deep
Key data: 1350 KG, 2800 mm, 2250 mm
2 ladders 3 shelves 6 steel panels per floor 1100mm deep
Payload: 1,300 kg Max. vacuum lifter: 4,000 x 2,000 mm Number of suction cups: 19 pcs. Dimensions LxWxH: 480 x 200 x 250 cm Weight: 1,400 kg
2 almost identical, mobile loading bridges from 1.45 m to 0 Manufacturer Fa Butt, Factory No, 80110001281 A Year of construction 2010 Load capacity 7,000 kg
Koppens/CFS Crumb Auger Feeder Model: BRF200 Built 2003 Screw auger feeder designed to feed a breading machine
Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible.
An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.
Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.
Manufacturer: Genie Model: GTH-5021R Year of Manufacture: 2016 Mass: 16,653 kg (36,712 lbs) Rated Capacity: 5,000 kg Nominal Power: 83 kW Max Drawbar Pull at Coupling Hook: 30,000 N Max Vertical Load at Coupling Hook: 10,000 N Lifting height: 20.86 m Engine: Perkins 854E-E34TA All-wheel drive Remote joystick Full serviced at 4550 h Extra accessories: - Pallet forks - Bucket - Hook Find more here - / Contact us at -
Type: TRC1500/600 Serial number: 11490-2 Year of construction: 2019 Belt width: 655 mm Transport length: 1500 mm Power: 3 x 400V, 50Hz, 0.37kW Dimensions: 1500 x 1250 x 1450 mm
Stock number: D1115, Loader, stainless steel,, GEA/Scanio type K16., For lift and unloading of max 1.000 kg. vats,, height of unloading 2500 mm., Outer dimensions D 1800 x W 2500 x H 3950 mm., Without safety cabinet., Material: Stainless steel AISI 304
Stock number: D938, Loader, stainless steel,, Beritech type berilift., Chain type., Lifting fork with slit grip., For lifting/emtying of Vemag wagons., Total height 4100 mm., Variable tipping height., Estimated max tipping height 3250 mm., Material: Stainless steel AISI 304
HÄNER HCM450 Concrete mixing bucket for wheel loaders and excavators New device Working width: 1650 mm Height: 900 mm Depth: 930 mm Nominal capacity: 450 l Maximum capacity: 500 l Curb weight: 750 kg Concrete weight: 1,140 kg Total weight: 1890 kg Required oil volume: 60-150 l/min Maximum pressure range: 240 bar Open/Close Hose Connectors: 1/2 inch Hose Fittings Turn: 1/2 inch Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Our HCM450 concrete mixing bucket has the following data and specifications: – Side panels made of 12 mm S355 - Base body made of 10 mm S355 – Mixer screw rings made of wear-resistant HB500; Thickness 15 mm – Mixer shaft made of C45 solid steel; Diameter 65 mm - Cutting edge made of 20mm HB400 – Roller bearings with free ...
TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...
HÄNER HCM200 Concrete Mixing Shovel for Wheel Loaders and Excavators New device Working width: 1280 mm Height: 780 mm Depth: 780 mm Nominal capacity: 200 l Maximum capacity: 240 l Curb weight: 400 kg Concrete weight: 552 kg Total weight: 952 kg Required oil volume: 40-80 l/min Maximum pressure range: 200 bar Open/Close Hose Connectors: 1/2 inch Hose Fittings Turn: 1/2 inch Drive Type: Mixing Shaft, Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Our HCM200 concrete mixing bucket has the following data and specifications: – Side panels and base body made of 10mm S355 – Mixer screw rings made of wear-resistant HB500; Thickness 12 mm – Mixer shaft made of C45 solid steel; Diameter 65 mm - Cutting edge made of 20mm HB400 – Roller bearings with free-moving rollers – ce ...
TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...
HSG Store Pro Smart automation for modern production Fits 3015 and 4020 available. The HSG STORE Pro is an intelligent and flexible automatic loading and unloading system designed to effectively address common production challenges such as staff shortages, limited space and low machine utilization. With a tower height of only 4.4 meters and up to 10 storage positions, you can use your space up to 70% more efficiently. Synchronized processes minimize waiting time and maximize machine capacity – ideal for higher outputs even in the second or third shift. The STORE Pro supports a variety of sorting strategies and grows modularly with your production needs. Affordable, secure and easy to use – the perfect automation solution for every step of your process. Automation reduces waiting times because logistics employees have less manual material. At the same time, our system ensu ...
Notes: - Year of construction of the machine results from the production and delivery date of the parts before completion. According to 2021/08/26, this means that the machine is actually built in May 2020 - Regular market value of the machine: 35,660.00 EUR - with mixed profile - Adapter for car towbar - 2 additional control circuits at the front for complex attachments, sweeper, tiller, etc. - in stock in open space - Less than 10 operating hours from relocation - Load capacity: 3300 / 2200 / 1700 kg - Incl. loading bucket, quick coupler and pallet fork - 24 volt technology for excellent starting behavior even at low temperatures (winter service) and long unused downtimes - All-wheel drive - robust naturally aspirated diesel technology 3.2l displacement with road approval and without Ad-Blue, no CAT and no susceptible exhaust gas purification as well as no susceptible tur ...
Documents are complete Auction-ID: A3-44485-5072
maximum number of results exceeded
please refine your search
250 € 
