134,374 used machines on RESALE, but how to find them? Machine Search
Auction-ID: A3-46152-22019
Koppens/CFS Crumb Auger Feeder Model: BRF200 Built 2003 Screw auger feeder designed to feed a breading machine
An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.
Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.
Equipped with: central lubrication, control Storage capacity: 8 tons Dimensions: 8600x2200x3000 Auction-ID: A3-46157-16341
bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.
Stock number: D1145, Litre: 1.9, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hopper vacuum loader, Motor: 0.8 kW - 240 Volt, Power consumption: 1 kW, Dimensions: H 451 x D 290 mm, Capacity: 15 kg/h, Working temperature: Max 35 °C, Noise level:
Upper deck, lower deck and goggles. Auction-ID: A3-46155-21785
Stock number: D938, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Loader, Tipping height: Variable, Max tipping height: Estimated H 3250 mm, Dimensions: H 4100 mm, Type: Chain-driven, Other: Lifting fork with slit grip for lifting/emptying of VEMAG wagons
Stock number: D1115, Loader, stainless steel,, GEA/Scanio type K16., For lift and unloading of max 1.000 kg. vats,, height of unloading 2500 mm., Outer dimensions D 1800 x W 2500 x H 3950 mm., Without safety cabinet., Material: Stainless steel AISI 304
Type: SWE140 Maximum lifting height: 3655 mm Maximum lifting capacity: 1400 kg
Auction-ID: A1-40311-47
Country of origin: Germany, L max mm: 3.2, Operating hours: 0
TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...
Equipped with: two axles, towing eye, PTO, Auction-ID: A1-47389-150
TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...
Material clamp, material gripper, load clampCarrying clamp, lifting clamp, block pliersManufacturer: NORDGREIF Type 7548Year of construction: 1997Load capacity: 500 kgGripping width: 280 to 420 mm- Width adjustment via trapezoidal thread with hand crank- Protective rubber coating on the gripping surfaces- For crane operation- with CE markingWeight: 50 kgGood condition; used
4 pieces New Auction-ID: A1-49820-38
HSG Store Pro Smart automation for modern production Fits 3015 and 4020 available. The HSG STORE Pro is an intelligent and flexible automatic loading and unloading system designed to effectively address common production challenges such as staff shortages, limited space and low machine utilization. With a tower height of only 4.4 meters and up to 10 storage positions, you can use your space up to 70% more efficiently. Synchronized processes minimize waiting time and maximize machine capacity – ideal for higher outputs even in the second or third shift. The STORE Pro supports a variety of sorting strategies and grows modularly with your production needs. Affordable, secure and easy to use – the perfect automation solution for every step of your process. Automation reduces waiting times because logistics employees have less manual material. At the same time, our system ensu ...
HÄNER HCM500 Concrete Mixing Bucket for Wheel Loaders and Excavators New device Working width: 1970 mm Height: 900 mm Depth: 930 mm Nominal capacity: 500 l Maximum capacity: 550 l Curb weight: 800 kg Concrete weight: 1200 kg Total weight: 2000 kg Required oil volume: 60-150 l/min Maximum pressure range: 240 bar Open/Close Hose Connectors: 1/2 inch Hose Fittings Turn: 1/2 inch Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Our HCM500 concrete mixing bucket has the following data and specifications: – Side panels made of 12 mm S355 - Base body made of 10 mm S355 – Mixer screw rings made of wear-resistant HB500; thickness 15 mm – Mixer shaft made of C45 solid steel; diameter 65 mm - Cutting edge made of 20mm HB400 – Roller bearings with free-mo ...
-Outrigger legs are included Auction-ID: A3-46160-22004
Besander Wiedenmann with PTO drive 540 rpm., 4-speed lawn tires 16.5x65-8" 6 PR for low ground pressure. Self-loading function by means of hydraulically tilting container when reversing. Spreading function by PTO drive. Tank volume approx. 0.75 m³, working width approx. 1.00 m. 2 hydraulic connections with control unit dw required! Simple technology - robustly built, functional. Machine in the process, details, photos and price on request! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
Key data: 3500 KG, 30900 mm, 4900 mm
SSI Schaefer PR600 – 30.90 m | Height 4.90 m | Floor + 2 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage req ...
weight max. in kg:3000 kg weight:330 kg Dimensions (L/W/H):800x320x430 mm
CONTROLS electronic controls DIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 600 mm total height: 1200 mm total weight approx.: 500 kg ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz Clamping range: 3-25mm Rod length: 3000mm
ID3590 Kaelble SL26 year/Year of construction 1990 28,000 hours/hours Bucket with cutting edge, Scania engine, tires approx. 30% good Shovel with cutting edge, Scania engine, tyres approx. 30% good
A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible.
TECHNICAL SPECIFICATIONS Number of silos: 4 pcs. Number of lanyards: 2 pcs. COMPOSED OF - 3 loading silos of approx. 90 cbm each - Diameter: 5,800 mmm - Hot-dip galvanized steel substructure - 1 loading silo with approx. 115 cbm - Diameter 7,000 mmm - 1 pc. take-off tape, AA 21,500 / BB 800 mm - 1 piece loading conveyor, AA 18,000 / BB 800 mm - Discharge height: approx. 4.0 m - Incl. weighing system
used
maximum number of results exceeded
please refine your search
10 € 
