126,720 used machines on RESALE, but how to find them? Machine Search
Labeler, floor labeler Herma GmbH Stuttgart Type Labelling unit PAX 230 V, 50 Hz very good condition, directly from production! 2 identical labelers available
Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
BLM DYNAM 3 CNC tube bending machine was built by BLM S.P.A. in Italy in 1999. Distinguished by its high productivity and bending accuracy, the machine is an indispensable tool in any production facility. The applied technical solutions and reliable components make it possible to perform fully automatic, serial bending of profiles and tubes with a maximum diameter of 60 mm. All process parameters are entered on an intuitive CNC controller with many functions that facilitate the programming of even the most complex shapes in just a few steps. Throughout its lifetime, the DYNAM 3 mandrel bending machine has been regularly serviced. The total weight of the machine is 5070 kg. Technical specifications of the BLM DYNAM 3 CNC tube and profile bending machine - CNC control system: BLM FNC 2000 R - maximum tube diameter: 60 mm - tool set for bending tubes Ø 25 mm - lubricant pump: FLENCO ...
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100 ...
Key data: 4000 mm, 5000 mm
Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the ...
VERGELLA SYSTEM TO 2 PLACES PHOTOS SBOZZATOR BIFILARE COPPER "SAMP" A 13 MOD PASSAGES, MT 45.20 VERGELLA 8 MM. MAX 4.5 - MIN 1.13. VMAX 30 N/1' WITH INFUSTATOR, 35 N/1' WITH BOBINATORs. RECOTTURA "SAMP" MOD. R 45.2 N 2 VERTICAL ACCUMULATORS FOR STATIC BOBINATORs N 2 BOBINATOrS STATES CI "SAMP" MOD. SSI/800 FOR BOBINE FROM 630 A800 WITH ROLLER AND MOTORIZED REFORIATOR N 2 VERTICAL ACCUMULATORS FOR INFUSTATORS. N 2 INFUSTATORS "SAMP" MOD. AS/3 FOR 2- 2.5 TON DRUMS. TRAFILERIA "POLO/COSEMA" FROM 15,000 LITRI TO FABRIC NOT FABRIC WITH FORCE RECIRCOLO AND RESTRAINING EXCHANGER1 PLUS 1 SPARE 4 SET OF TWO IN WORKING AND TWO OF SCORTA
Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm
DEFILE E 1000 MM. ELECTROLYTE ST. ST 3 A "STEULER" 2500 A, VMAX 15 N/1' VERTICAL ACCUMULATOR INFUSTATOR "FRISH" KG 1500 - 2000 A FUSTO ROLLER FOR CARICO AND SCARICO FUSTI
Machine type: ESA 15 Manufacturer: ERBA Power kW: 3.37 Bdw3H9Emd2R Mud basket volume: 15 lt. Description: The ESA 15 recirculating centrifuge from ERBA (patent no.: 201606464) is a professional stand-alone system for the treatment of process water for mass finishing systems. It has a waste water tank with agitator, as well as a pure water tank and can produce up to 600 litres of fresh water per hour. Dirt particles are separated from the process water with 1500 g force and removed as a solids cake. The programmable logic controller (PLC) with touchscreen makes the condition of the machine particularly simple. The ESA 15 is also very space-saving due to its compact design. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with addi ...
Key data: 490 mm, 1120 , 990
Machine type: EVP 250 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP 250 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may ...
No. 3 CAVALLETTI OF A BARRA BOB - 800 SACION OF CESTONI TO 3 PLACES PICK-UP TUB WITH RECIRCULATION PUMP COMPLETE STAGNATURA OF CROGIOL CANAROLA OF RAFFREDDAMENTTO TO PIOGGY 3-PLACE FOR BOBINE - 400 - 560 - 630 MM FUMI SUSATION IMPIANTO ANOD FUSION VASCA
COMPONENTS OF EACH PLANT: "TECHNOFIL/DE ANGELI" MOD. T 15/25 COMPLETE OF VASCA FOR EMULSIONE RECOTTURA FORNO "TECHNOFIL/DE ANGELI" "TECHNOFIL" FOR BOBINE - 400 SYSTEM OF TRASTIOF FUSTITORS To 8 PLACES FOR T 15/25
Key data: 3560 mm, 2466 , 1800
Machine type: EVP 3000 Manufacturer: ERBA Power kW: 15 Total volume: 3000 lt. Description: The EVP 3000 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size m ...
COMPONENTS OF EACH PLANT: TRAFILATRICE "SAMP" 8 FILI MOD. MST/8/21 CABINA COMPLETE RECOTTURA "SAMP" MOD. RC 60 SYSTEM OF SAUNSTICS TO 8 PLACES DOWN VERTICAL AND SCARICO "POLO/COSEMA" FROM 10,000 L. CONTINUE TISSUE/NON FABRIC FILTER
"SAMP" MOD, MM 2 C COMPLETE OF VASCA FOR EMULSIONE. "SAMP" RECOTTURA FORNO. DYNAMIC COLLECTION BOBINATOR FOR BOBINE - 400
Key data: 115 mm, 1540
Machine type: Turbo 14 Manufacturer: ERBA Power kW: 0.55 Total volume: 14 lt. Description: The ERBA Turbo 14 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 14 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
TREFOLATRICI MONOARCO 3000 GIRI "O.M. LESMO", MODEL DTO 630, MATR. 737878/1, 737878/2, BOB COLLECTION : 630 COMPLETE OF PEPMESS "ANDANTEX" TYPE SATORFORSFOR1/8 BOBINE CONIFLIP REREFERES AND LINK WITH BANCAL OF ACUNCUNMENT FOR 48 BOBINEs
UNWORK CENTRE TO 54 MANMOTOR POSTS BOB - 560 ROTANTE COLLECTION FOR BOBINE - 1600 MM BANCAL OF DISTRIBUTION WITH 3 TESTES TO LEGARE
Mori seiki MT 2000 multitasking lathe :::TECHNICAL SPECIFICATIONS::: CNC model: Mori Seiki - CNC version: MSC 501 - Spindle nose: ASA 6 - Spindle power: 22Kw Number of main spindle speeds: 6000 - Turning diameter: 540mm - Bar passage: 65mm - Turning length: 1020mm Number of tools: 60 Tool holder: CAPTO C6 Spindle power: 18Kw Number of spindle speeds: 8000 X-axis travel: 565mm Y-axis travel: +-80mm Z-axis travel: 1077mm Swivel B-axis travel: + - 120 ° degrees Fast feeds for linear axes X Y Z: 24m/min High refrigerant pressure: yes Pressure value: 80bar External tank system with filter: yes Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 155mm First turret Z-axis travel: 1067mm Sub-spindle: yes Spindle nose: ASA 5 Number of counter ...
No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000
CAVALLETTO SVOLGITOR TO BARRA WITH FRENO D. 1500 MM TUBOLARE CORDAR To SILURO "DE ANGELI" MOD. CS 12 to 12 CULLE - BOBINE 560 MM GIRI 500N/1' COUNTERMETERS VOLANO OF TIRO - 1500 "DE ANGELI" 2000
Key data: 400 mm, 1100 mm, 3500 1/min
Machine Details Stock-No. 1105-04040 Type of machine CNC Lathe Make NAKAMURA Type SC 300 L Year of manufacture 1998 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time by arrangement from the location Freight basis EX WORK Price Technical details turning diameter 350 mm turning length 1150 mm control FANUC 21 t turning diameter over slide 300 mm turning speeds 3500 rpm rapid traverse 20/25 (X,Z) m/min power capacity 22 kW Additional information NICE MACHINE TURNING LENG 1150 CNC FANUC 18 T WITH LIVE TOOLS ANS C AXIS CHIP CONVOYER HYDRAULICK STEADY SMW Technical details and information subject to amendments and errors. 2024 Created with ModulMWS by LogoTech oHG
SVOLGITOR TO BARRA "DE ANGELI" FOR BOBINE SILURO CORDATRICE 4 PLACES "DE ANGELI" FOR BOBINE : 1 000 GIRI 200 N/1' VOLANO OF TIRO - 1500 COUNTERMETERS "DE ANGELI"
Wet glue labeling machine Langguth E 32 for buckets and canisters incl. glue pump and vibrating magazine very good operational condition, directly from production!
Fully functional used CNC milling machine Deckel Maho DMU 60 with rotary table Built in 1999 Heidenhain Control We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in adv ...
MAXIMUM ROTATING DIAMETER: 200 MM MAXIMUM TURNING LENGTH: 300 MM MAXIMUM TURNING DIAMETER: 160 MM BAR PASS: 41 MM COURSE ASSE X1: 175 MM COURSE ASSE X2: 132 MM COURSE ASSE Z1: 305 MM COURSE ASSE Z2: 155 MM QUICK X-Z AVANZAMENTS: 12 - 20 M/MIN MANDRINO: 100-5000 RPM; 11-15 KW; ASA 2-5 CONTROMANDRINO: 100-5000 RPM; 3.7-5.5 KW TOOL-HOLDER: 12 POSITIONS CONTROL: FANUC 18i-T WEIGHT: 4900 KG INGOMBRO: 3650 x 1940 x 1830 MM
Key data: 135 mm, 1550
Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 lt. Description: The ERBA Turbo 20 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 20 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
This divider is great solution for rye bread. Weight range per piece: 200-1000 gr; Capacity: 500-1500 pcs/h ; Large hopper for 100 L; With conveyor and two flour dusters; Used for some tests, almost as new!
Berstorff Rotocure AUMA 20-S Drum dia: 2000mm Drum width: 2600mm Sandvic Steelbelt Description attached!
Key data: 220 mm, 1550
Machine type: Turbo 35 Manufacturer: ERBA Power kW: 1.5 Total volume: 35 lt. Description: The ERBA Turbo 35 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 35 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy ...
Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t
Key data: 270 mm
Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 lt. Description: The ERBA YE 200 separation line is used to separate workpieces and grinding medium. Two motors provide the necessary movement of the screen. The YE 200 can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to ...
Controlled turret punching machine, used controlled turettpunching machine, used Fabr.: EDEL Model: MICROMAT 207 HS Control/ control: LOGO 2000 (with workpiece graphics / with workpiece graphics) Built / year: 1997 Force/punching force: 20 t Maximum sheet thickness/ max. thickness: 0.5 ... 5 mm Travel in X-axis/ travel in X : 1250 mm (expandable to / enlargeable to 2000 mm) Travel in Y-axis / travel in Y axis: 750 mm (expandable to / enlargeable to1000 mm) Punching speed / number of strokes: 20 per min Stroke stroke infinitely adjustable up to / stroke: 40 mm Punching example for steel punching 100 mm 1.5 mm ( punch diam. and thickn.) 50 mm 3.5 mm 16 mm 12.0 mm Machine weight/ weight 5 t Connection value / load: 14 kW
Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours
TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...
LVD Siena strippit 1212 punching machine was built in 2005 in Belgium by LVD Group NV. Designed for machining steel and aluminium sheets, the machine is an excellent choice for both unit and batch production. Reliable components with excellent performance, combined with a compact design based on a one-piece frame, ensure that the SIENA 20 1212 punching machine delivers excellent precision and machining quality for many years of use. The capacious, 27-station turret with 3 auto-index stations and MultiTool support offers a wide variety of machining options and a high level of flexibility. Precision tools punch metal sheets with a force of 20 tonnes on a large brush table, which protects the surface of the workpiece from scratches and scrapes, while increasing the quality of machining. All of this is completed by the GE FANUC CNC control with its unique Smart Stroke function for automat ...
Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant
Machine Details Stock number 1105-04042 Machine Type: Surface Grinding Machine Make JACOBSEN Type 1432 Year of construction 1992 Condition Conventional control type Storage location HAGUENAU FRANCE Country of origin Delivery time at short notice - by arrangement. Freight base delivery from site. Price Technical details Grinding length 900 mm Grinding width 410 mm Travel - x 900 mm Travel - y 410 mm Travel - z 300 mm Machine weight approx. 2700 kg Information Distance table - spindle center: 135-575 mm Table speed X: 30-30000 mm/min. Table speed Y: 4-3750 mm/min. Table speed Z: 4-4000 mm/min. Max. grinding wheel dimension: 300x50x76.2 mm Drive power grinding spindle: 4.7 kW MAGNETIC PLATE BRAILLON 800 X 400 MM 5 GRINDING FLANGES
Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20
Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm
Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...
used
Grinding length 500 mm Grinding width 250 mm Workpiece height 375 mm max. table load 350 kg Table longitudinal movement 525 mm Table feed 2-28 m/min Total power requirement 4.5 kW Machine weight approx.1900 kg Control NC Height: approx.2.60 m Width: approx. 2.10 m Depth: approx. 2.00 m Total weight with cooling lubricant container: approx. 2.3 t.
Bread cutter Wabäma Model: R 400 EX The all-rounder among bread slicers EX model for installation in the sales counter! Max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular cutting machine with bread halving Round blade made of high-quality Teflon special coating Circular knife machine mobile Cutting thickness adjustable from 4 to 25 mm DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 750 x 860 mm, WxDxH Used machine cleaned 6 months warranty Option: Maintenance contract Spare blade Service Package Delivery & Installation Instruction & Commissioning We have a wide range of bread slicers!
Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...
Steel window folding bag for TH 78 Built: 2007
Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...
maximum number of results exceeded
please refine your search
