130,792 used machines on RESALE, but how to find them? Machine Search
Batch kneader WP UC 80 AC with 2 extendable tank cars 2 watches, 2 speeds only DGUV V3 tested by us Connection 400 V, 63A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service
Control Siemens 828D - ShopTurn Rotary diameter. [mm] 405 Turning length [mm] 956 Main spindle: Lining SAMCHULLY HS-12 (12 inches) Spindle speed (max.) 3,000 rpm Spindle nose A2-8 Motor power (Cont./Max) 18.5 kW / 26 kW Max. turning Ø x turning length 405 mm x 956 mm Tool carrier (X/Z): Number of tool positions 12x BMT65 Max. milling Ø 433 mm Travel (X/Z) 245 mm / 1,040 mm Rapid traverse (X/Z) 24 m/min / 30 m/min Tailstock: Quill Ø 110 mm Quill stroke 100 mm Equipment/accessories: Control SIEMENS 828D - ShopTurn Bed construction 45° inclined bed (cast from one piece) Additional equipment Tool Probe (Tool Setter, swivel) Collision protection turret with Hirth serration Weight 5,600 kg (according to configuration nameplate) Chip Management Chip Conveyor Electrical connection 380 V / 3PH. PE / 50/60 Hz / 42 kVA
Cone wrapping machine HWM 500 4C for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Winding machine with infeed belt 1 man waitress for all doughs for wrapping Cone wrapping machine with 500 mm belt width only DGUV V3 tested by us Connection 400V, 16A-CEE plug NEW Machine & SAB Tested with warranty + spare parts service
Cone wrapping machine Universum HWM 50/70 EZ for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service
Steinel SH4 milling machine. Good condition. With lots of accessories. The machine runs and does what it is supposed to.
Batch kneader WP UC 120 AC Dough kneading machine Universal Batch Kneader WP UC 120 A Spiral Kneader with 2 extendable tank cars only DGUV V3 tested by us Connection 400 V, 63A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service
Internal cylindrical grinding machine, Tripet Swiss, 1991, Schleifdia. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...
bm TEC Dough Conveyor Belt Short Belt width 350 mm Belt speed infinitely adjustable Stainless steel version only DGUV V3 tested by us Connection 230 V Used device cleaned & SAB tested
Surface grinding machine, used, Grinding area: 450x200x250mm, with magnetic plate, puller, holders, coolant device, ...
bm TEC Folding Dough Conveyor Belt Belt width 300 mm Belt speed infinitely adjustable Stainless steel version only DGUV V3 tested by us Connection 230 V Used device cleaned & SAB tested
Milling cutters, End mills, drop cutters, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !
Key data: 3000 mm, 4 mm
Hydraulic Swivel Bending Machine -Heavy welded construction -centrally driven bending beam -Hydraulic drives -Standard stroke 400 mm -Cybelec control screen retrofitted Machine is fully functional Year of construction 2000 With honeysuckle foot splints 100 mm and various accessories Viewing possible by appointment LxWxH approx. 5000 mm 2500 mm 2700 mm Weight approx. 8500 Kg
Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002
Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...
Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...
Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!
Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!
Key data: 1600 mm, 800 mm, 650 mm
CNC bed milling machine with Heidenhain control 415, good condition, hydraulic tool clamping, coolant device, central lubrication, lighting,.. Travel X1600/y800/z650/ Spindle holder SK 50 Spin elder speed 60-1800rpm Working feed rate 10-3000mm/min Rapid traverse 10m/min Table clamping surface 1800x610mm Machine weight 9500kg Table load 3000kg
Excellent condition - Fully operational - Loading / Transport possible! 2 aggregates Working width 1350 mm Workpiece thickness 3 to 160 mm Working height 900 mm Feed rate 3 to 15 m/min Drive motor 15 kW Feeder motor 0.75 kW Height adjustment motor 0.75 kW Brush motor 1.1 kW Compressed air pressure 6 bar Pressed air consumption 6 l/min
Offer 26084 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic follow-up control for a complete workflow - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - The lower beam 100 mm - Upper bolster drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Bending beam adjustment - Backgauge adjustable with handwheel - E-foot button - Space requirement with back gauge - approx. W 3200 x H 1650 x D 2100 mm - Weight approx. 4500 kg
Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine
Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.
Mosca RO-M-P4 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically Optional equipment: version with ultrasonic welding Odometer reading: less than 2,500,000 straps Documentation: Operating instructions, spare parts catalogue and electrical diagram available
Bottle blowing machine from Sidel type SB 012 ROUE. Capacity up to 15,000 bottles/h. Year of manufacture 2001.
Excellent condition - Fully operational - Loading / Transport possible! maximum workpiece thickness 45 mm minimum workpiece length 220 to 350 mm maximum edge material height 50 mm minimum edge material length for fixed dimensions 330 to 400 mm maximum edge material protrusion top and bottom 2.5 mm Edge material protrusion front approx 10 to 20 mm Edge material rear protrusion ca 10 to 30 mm . minimum workpiece width 90 mm minimum workpiece thickness 10 mm maximum length with extension arm 4269 mm Working length with boom 4269 mm Depth with roller plates 1425 mm Working table height 888 mm Working width with support pushed in 210 mm Working table width with support rail extended 680 mm With milling unit
Mosca RO-M-P4 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding Odometer reading: less than 2,950,000 strapping Documentation: Operating instructions, spare parts catalogue and electrical diagram available
Heavy Duty Column Drill Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable - Stage 1. 130 - 480 rpm - Stage 2. 480 - 1750 rpm - 3 feeds 0.1; 0,2; 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Height adjustable via rack with hand crank - Separate coolant device - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg
Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-45834-205
Case kit with riveter for threaded inserts complete with all accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-45834-343
Mosca RO-M-P5 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding Odometer reading: less than 930,000 strapping Documentation: Operating instructions, spare parts catalogue and electrical diagram available
Used line for packing beer bottles in cartons from Meypack. Specifications Performance: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packaging Type: Wrapped Carton Box Carton Dimensions: Length: 120 - 300 mm Width: 210 - 400 mm Height: 100 - 350 mm Packaging Formation: 2x5 & 4x5
Control Heidenhain TNC 640 Speed [rpm] 5000 Travel X/Y/Z [mm] 4500/1800/1300 General: Control Heidenhain TNC 640 Travel X/Y/Z 4,500/1,800/1,300 mm Speed 5,000 rpm Tool holder SK 50 Milling head (spindle): Technology Diagonal head with gear spindle Pitch 0.001° Speed 5,000 rpm Tool holder SK 50 Power max. 43 kW Torque max. 1,045 Nm Media Feedthrough KSS + Blown Air Work table: Clamping area 6,000 x 1,100 mm T-slots 6x 22H12, spacing 140 mm Tool magazine: Technology Chain Magazine Number of stations 40 Tool changer double gripper (horizontal/vertical) Tool diameter max. 125 (250) mm Tool length max. 400 mm Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system with filter, 20 bar Workpiece Measurement Radio Probe M&H Setup operation Electronic handwheel HR 510 Adaptive Cont ...
Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication
Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !
Auto strapping machine. In great condition with extra roll of pvc strap material.
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90% Other tools : See photo
Description DÖRRIES SDE 200 Vertical Lathe Details Type SDE 200 Machine number K240/50662 Year of manufacture 1977 Face Plate 2,000 mm Circulation 2,200 mm Turning height 2,150 mm Max. table load at reduced speed 20 to incl. documentation
Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition
Ref. №: 4222 Portion cutting machine for meat with/without bone, bacon, ham, diary products, fish, vegetables Cutting chamber size (LxWxH): 700 x 220 x 240 mm Cut-off length: 0-70 mm Machine width: 90,0 cm Machine length: 200,0 cm Machine height: 145,0 cm Motor power: 3,4 kW Operating voltage: 380 V, 50 Hz
CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works
Horizon Stitchliner 5500 year 2009 2 x collator VAC-100 saddle stitcher SPF-30 stitching heads Hohner accumulator folder ACF-30 trimmer HTS-30 stacker ST-40 counter 6 million good condition
SK40 milling head, with flange, with quill and tool clamp, swivelling. good condition. Is from a CNC tool milling machine MAHO 700C, We would also have a smaller one from a DECKEL FP3A. Also with quill and clamping. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...
Travel distance: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 1/min Dimensions LxWxH: 2500 x 2200 x 2200 mm Weight: approx. 3,000 kg
Machine : Vert. Milling head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40
Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please enquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.
Key data: 14000 kN
The machine was fitted with new seals for the spars in 2025. Delivery by pick-up only
Key data: 16000 kN
The machine is still energized and functional. Delivery by pick-up only. The offer is only valid for a short time
maximum number of results exceeded
please refine your search
87 € 
