liquid filler used for sale

Filler SEN Combi RE with124 filling station blocked with 20head Zalkin screw capper Capacity: 19.900 bph by 1,5 ltr. PET bottles Year of manufacturing: 1991 Isobaric filling system Bottle formats: 1,5 ltr. PET and 0,5 ltr. PET Work direction: left-right The machine is suitable to fill carbonated soft drinks. incl. cap feeding system: Gassner The machine is out of production but still connected.

Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  Filling valves: 10 Filling principle: Atmospheric Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Closure: 26mm crown cap Output: 1,500 bottles/hour

Edhard Funnel 17 Ltr. single outlet, 1-hole system NewManufacturer: EdhardVolume: Â Â 17 LtrDetails see pictures

This single head Alfa Laval Astepo Aseptic Pilot Filling System for bag-in-box (PTAF) system is a filling system for filling of a wide range of food and beverage products info appropriate bag-in-box bags under aseptic conditions. The PTAF filling system has been designed for use in laboratory and pilot applications as well as for taking sterile samples in aseptic industrial plants. A fail safe system continuously controls the sterile conditions. In case of an unexpected risk of sterility loss the equipment aborts production and notifies the operator. The PLC only allows for return to production mode after all the necessary parameters for sterility have been reset succesfull., This PTAF aseptic pilot filling system is designed for 1-20 litre (1/2 - 6 gallons) sterile bags of the bag-in-box type. It is available with a 1 inch filling valve for liquid products, dense and viscous. It is also ...

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.

Pastry Filler / Berlin Filler with 2 Pistons NEW! Pastry filler / doughnut filler with 2 plungers for filling doughnuts or pastries5 liter bowl with lid made of stainless steel Details see picture

Side Pastry Filler / Berlin Filler with 1 Piston NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries2 liter bowl with table attachmentDetails see picture

Edhard Funnel 17 Ltr. double OutletFunnel 17 Ltr. double OutputVolume: 17 LtrDetails see pictures

Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surfa ...

Overview    The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little.  Technical Details  Capacity: Up to 2.160 bottles per hour   Number of filling heads: 6   Last used formats: 0,33l Longneck   Possible bottle diameter: 5.3 cm - 7.6 cm  Dimensions (Floor): 1680 mm x 1070mm 

Overview  This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data  Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery  Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system  

Masterfill Filling Machine S 500, The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products., Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards., The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill ...

strap length approx. 4500 mm; extendable to approx. 10 metres; belt width approx. 600 mm; equipped with control box; mobile; Hydraulic Auction-ID: A1-43573-5

equipped with supply belt and (2x) conveyor belt; Belt width approx. 1450 mm Auction-ID: A1-43573-148

Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) Capacity: Up to 3,000 bottles/hour (330 ml) Filling system: 12 counterpressure long-tube valves Capping system: 4-head crown capper (26 mm) Bottle format: 0.33 L (prepared) Working pressure: 2.0 – 2.2 bar Working temperature: 0 – 4 °C (optimal) Oxygen pickup: 10–12 ppb dissolved oxygen Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump Product pump: Included CIP syst ...

Overview This filling monoblock was manufactured by MBF in 2001 and is designed for the filling of hot fruit juice (up to 95°C). The Synchrofil LV operates with an atmospheric (gravity) filling system and includes an integrated capping unit for aluminum screw caps (MCA standard). The machine is equipped with 35 filling valves and 4 rolling capping heads. It is adjusted for 1.0 L and 0.5 L VdF glass bottles with a diameter of 89.5 mm. The machine runs clockwise l-r and reaches a capacity of up to 7,000 bottles per hour. It is equipped with automatic speed control, CIP tank for automatic cleaning, and closure control systems. Technical Data manufacturer: MBF model: Synchrofil LV 1200-35 / 240-4V year of manufacture: 2001 condition: used filling system: atmospheric (gravity) filling temperature: up to 95°C number of filling valves: 35 number of capping heads: 4 (rolling heads) closure typ ...

Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V  

Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details  Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

For an injection moulding machine, hole diameter 125 mm Auction-ID: A1-43992-210

Self-propelled, with working bitumen pump, indirect heating, manual support leg, trailer coupling, work lights, beacon. Auction-ID: A1-40133-321

Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data  Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) ...

General SKU300U604 LocationBarneveld CEcheck MakeBohle TypeBFS15 Main Features MaterialStainless steel Volume30 Ltr. Motor15 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck With pan mounted on wheelscheck CapacityNetto 30Ltr. (bruto 45Ltr.) Pan sizesDia. 350x400 mm Capacityca. 62 kg/h With fancheck Capacity750m³/h Motor15kW, 400/690Volt, 2940rpm (EX) With dust filtercheck Filter surface2,2m² Cleaning with air pulsecheck MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 (316L), Stainless steel 1.4435(316L), Stainless steel 1.4462 (Duplex2205), Stainless steel 1.4571 (316Ti) Information No.08110 Year of construction2008 With switchgearcheck Total height+/- 3,5m Weight+/- 3500kg ATEX compatiblecheckCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsOther feedSolid pharmaceuticsDyes & pigmentsBiopharmaceutic ...

General SKU300U889 MakeGlatt GmbH TypeTFN30 No.4428 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Volume100 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck (3x) With pan mounted on wheelscheck Capacity100 Ltr. (30-60kg) Pan sizesDia. 500x300 mm Capacity100 Ltr. Can be heated by steamcheck 3bar, 50.000 Kcal/h With fancheck Capacity1500m³/h Motor7,5kW, 380Volt, 2920rpm With dust filtercheckinlet filter and outlet filter Filter surfaceinlet filter: unknown, outlet filter:4m² Mechanical cleaningcheck With timercheck MaterialStainless steel 1.4301 (304) Information With switchgearcheck( as is) Floorspace3,2x2,3 m Total height3,1 m Weight1600 kgCatalysts & fillersFeed additivesOther pharmaceuticsOther feedSolid pharmaceuticsMinerals & inorganicOther chemicalStarchFine chemicalsGene ...

General SKU253N183 MakeJohann Kreuziger Maschinenfabrik TypeRDH 500 RERE No.21159 Year of construction1986 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume450 Ltr. Motor80 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftmixer arm and dissolver disc With scrapercheck Motor57 kW (mixer): 20 kW (dissolver) With variable speed drivecheck With gear boxcheck With panø 950 x 650 mm (on wheels) Capacity450 l Outlet75 mm With hydraulic liftingcheck (3,6 kW) MaterialStainless steel Information With switchgearcheck (as is) Floorspace3,6 x 1,8 m Total height3,4 m Weight6000 kgCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPlanet ...

Capacity: 360 Bo/h, Filling points: 6 pieces, Voltage: 230 V, Compressed air: min. 6 bar, Length: 1590 mm, Width: 700 mm, Height: 1875 mm, Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L, Base construction: steel rack, Features: including add-on parts, filling programm modifiable

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

Additional title: 50,000 bo/h, crown caps, Capacity: 50000 bph, Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps, Running direction: rigth -> left, Operation / Control: Siemens S5, Base construction: filling level filler with return air tube, Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Output: 4,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0.33L Filling stations: 18 Electrical specifications: Max. Voltage: 208-240 V Total current draw: 38.5 A Maximum motor current: 10.6 A Phase: 3-phase Frequency: 60 Hz

Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Length: 3,10 m, Width: 2,25 m, Height: 3,30 m, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: left -> right, Operation / Control: Siemens S5

Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Overview This rotary pressure filling machine was manufactured in 1997 by NATE. The Veral 60-12 is designed for the filling and closing of beer and carbonated beverages in glass bottles. The machine operates as a pressure filler with vacuum pre-evacuation, ensuring stable filling conditions for carbonated products. It has been fully overhauled in 2023, including reconstruction of filler, capper and vacuum pump. The machine is not yet in production after rebuild and is prepared for PLC and control system integration (not included).  Technical data Capacity: approx. 20,000 bph (500 ml) Formats: 0.5 L long neck / 0.66 L / 1.0 L Application: Filling of beer and carbonated beverages Configuration: 60 filling valves / 12 capping heads Filling system: Pressure filling with vacuum pre-evacuation Filling pressure: approx. 0.05 – 0.06 MPa Product temperature: approx. 1 – 7 °C Ma ...

Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C

Used Filler KHS and Angelus PRO 120L Seamer for cans up to 40000 cph Introduction to the Filler KHS and Angelus 120L Seamer: In the dynamic landscape of beverage packaging, the demand for efficient and reliable canning solutions is paramount. Consequently, enter the Rebuilt KHS Can Filler paired with the Angelus 120L Seamer, a formidable duo tailored for high-speed operations. Originally manufactured in 1990 (filler) and 1993 (seamer), this system underwent a comprehensive rebuild in 2019, ensuring peak performance and longevity. Exceptional Capabilities Designed to cater to the stringent requirements of the industry, this powerhouse combination of the Filler KHS and Angelus 120L Seamer boasts exceptional capabilities. With 94 filling valves and 12 seaming heads, it delivers unparalleled efficiency, accommodating cans up to 40000 pieces per hour. Notably, ideal for 202/204 x 602 (0.35L)  ...

Used Acma rotary filler capper monoblock for liquid soap - year 2003Technical Specifications & Performance DataThis ACMA rotary filling monoblock integrates a precision filler and capping unit with an automatic cap sorter, delivering reliable throughput for liquid detergent production and industrial packaging applications. As a second hand solution ideal for a used bottling line, it combines compact footprint with robust engineering.Manufacturer: ACMA (Corniani division) Model: RCCA-1562 Manufacturing year: 2003 Production speed: up to 105 bpm depending on format Format performance: 0.45L: 95–100 bpm; 0.5L: 100–105 bpm Compatible formats: 0.45L, 0.5L Container handling: Designed for PET and Glass bottle handling (with appropriate change parts) Electrical supply: 380 V, 50 Hz, 10 kW Auxiliary circuits: 24 V Pneumatic pressure: 6 barAdvanced Automation & Control SystemsThe monobl ...

Technical Specifications & Performance Data The Used Can Filler Krones 50V and Seamer Angelus 62H up to 30000 cph is a robust filling monoblock designed for high-speed beverage production in aluminum cans. As a second hand solution from a leading OEM, it suits operators upgrading a used bottling line in industrial packaging environments. Monoblock configuration: Krones VCC-50-136 can filler with Angelus 62H can seamer Manufacturer and year: Krones, 1996 Production speed: up to 30,000 cans per hour Filler: 50-valve isobaric filling carousel for carbonated beverages Seamer: Angelus 62H, 6 heads, for 202 ends with 211 body compatibility Container type: aluminum can Formats handled: 0.35 L and 0.55 L Product types: soft drinks and other carbonated beverages Electrical: 575 V, 60 Hz, industrial panel with operator interface Condition: in production, ready for integration into a used bottling  ...

Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materi ...

Technical Specifications & Performance Data The GAI 21116 is a second hand volumetric filler engineered for precise edible oil dosing in glass bottles. Built in 2009, this unit delivers consistent performance for small to medium-scale industrial packaging operations or as a dedicated module within a used bottling line. Manufacturer: GAI Model: 21116 Year of manufacture: 2009 Filling principle: Volumetric with self-levelling control Number of filling valves: 16 Machine configuration: Linear (non-rotary) Rated speed: up to 3000 bottles per hour (bph) Container types: Glass bottles Product application: Edible oil and similar viscosities Condition: READY FOR OPERATION Safety features: Integrated guards and interlocks Documentation: Manuals available Designed for accuracy and repeatability, the 16-head array ensures steady throughput with minimal giveaway. The linear frame simplifies access a ...

Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C ...

Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours

Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16

Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  Capacity: 2,500 bph Formats: Prepared for 0.33 L Longneck Filling temperature: 6°C Overhaul & refurbishment details General overhaul in 2016: Pre-evacuation New rotary ball connection New stainless-steel table New electrics New valve control cabinet in stainless-steel design 0.33 L guiding set Sihi vacuum pump Renewed in 2023: Seals on lifting cylinders and filling valves Vacuum and overpressure valves equipped with new seals and springs

Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational

Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: Automatic valve opening/closing Centralized fill-level adjustment (±50 mm) Maintenance-free lifting cylinders Au ...

General SKU248S161 MakeLMG Lübecker Maschinenbau Geselschaft mbH LocationBarneveld CEcheck TypeAK-6.1002 Pressure Working pressure6 Bar Working pressure jacket4 Bar Main Features MaterialMild steel Volume2750 Ltr. Motor22 KW Specified Features - Mild Steel Reactor Reactorcheck Capacity2750 ltr Vessel sizesdia. 1400x3000mm Conical bottomcheck Dished top sidecheck Manholedia. 400mm Top connectionsDN150 (1x), DN 80 (2x), DN25 (2x), DN15 (2x) OutletDN80 With jacket(254 / 187 ltr) Max. temperature300 degr. C With propellor stirrercheck Motor22 kW 380-420/660-725 Volt Speed mixing shaft1460 rpm Mild Steel Reactors MaterialMild steel Information No.4240077 Year of construction2004 Floorspace1,7x1,7 M Total height4,0 M Weight4500 KgCatalysts & fillersMild Steel ReactorsSolventsDetergent & surf.OrganicsE-waste & metalLubricants & oleoDyes & pigmentsPlastic & ru ...

General SKU234M148 Makeunknown, typeplate is missing Typefloveyor LocationBarneveld Main Features Motor3 KW Length5000 mm Inlet diameter400 mm Specified Features - Vertical screw conveyor MaterialStainless steel Vertical conveyor screwcheck Tube-modelcheck Diameterscrew 400mm Lengthscrew 3,4 M Motorscrew 4 KW 380 Volt, floveyor 3 KW 380 Volt Screw speed28 rpm Conveying height5,0 M Information With switchcheck Floorspace+/- 3,5x1,5x1,0 M Total height+/- 6,0 M Weight1400 KGCatalysts & fillersFeed additivesPaper & otherSolventsVertical screw conveyorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine  ...

General SKU302U610 MakeDe Dietrich LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6000 Ltr. Motor5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6937 / 39,5 Ltr. Vessel sizesDia:2200x2500 mm Dished bottomcheck Dished top sidecheck ManholeDia: 770mm Top connectionsDN 350, DN250(2x),DN100(4x) OutletDN100 With jacketcheck 712Ltr. Max. temperature-10/150° With propellor stirrercheckimpeller Motor5kW, 400Volt, 1500rpm (EX) (no type plate!) Speed mixing shaft96rpm Glass Reactors MaterialGlass - Enamel (3009) Information No.65104 Year of construction2003 Floorspace2,2x2,2 m Total height4,6 m Weight6200 kg Technical specs Extra informationVolume 712 Ltr.Catalysts & fillersSolventsGlass-lined ReactorsDetergent & surf.Ot ...

General SKU204U047 MakeAZO TypeTFS 140 S No.P23110A0/0562 Year of construction2003 LocationBarneveld Main Features Motor1.1 KW Length3400 mm Inlet diameter150 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4404 Vertical conveyor screwcheck Trough-modelcheck Diameter150 mm Length3400 mm Between inlet and outlet2200 mm Shaft diameter100 mm Pitch50 mm Inletdia. 150 mm Outletdia. 150 mm Motor1,1 kW Screw speed82 rpm Outlet height1800 mm Conveying height1750 mm With coverscheck Information Mounted inclined in framecheck Mounted on wheelscheck Floorspace3,4 x 0,64 m Total height1,60 m Weight300 kg CEcheck Extra SpecificationsCapacity = 3070 Ltr./h Catalysts & fillersFeed additivesPaper & otherSolventsVertical screw conveyorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyA ...