liquid filler used for sale

Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...

General SKU271X309 LocationBarneveld MakeNewWeight TypeE234A Mach.No.13.1202-1 Main Features MaterialStainless steel Length1900 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder width300 mm Feeder length1900 mm Closedcheck With hoppercheck 540x550x450 mm Inlet280x130 mm OutletDia. 210 mm With unbalance drivecheck (3x) With motorcheck 230 volt With frequency controllercheck Information Year of construction2014 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Total height3,0 m CEcheck Floorspace2,0 x 2,40 m Weight485 kgVibro feedersNewweighConveying systems > Vibro feedersBrand > Newweigh What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

The LiquiPrep LP804 50/20 by Material Preparation and Feeding Unit is a state-of-the-art automated system designed for the continuous, bubble-free supply of high-viscosity media, including gap fillers, thermally conductive pastes, and adhesives. It boasts a tank capacity of 53.5/24.6 L (gross) with an agitator speed of 39 rpm and a maximum feed pressure of 12 bar. This machine includes a diaphragm pump with a volume of 100 ml per stroke and a vacuum pump rate of 267 l/min. The package comes with the DOS P300-2C01 dispensing head and the flexible DOS-GP-1C01 Logic control unit. The unit is suitable for electronic control systems and offers modular, low-maintenance integration for seamless automation. Available for immediate purchase in [Location TBA].

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg

Volumetric filling of liquid and viscous foods such as sauces, oils, marinades, dressings or comparable products into suitable containers (e.g. bowls, bags, cans, jars, cups) Basic structure: stainless steel frame with integrated product hopper, filling station with 5 piston cylinders and filling valves, drive unit, control unit. Product funnel: Made of stainless steel, with removable lid. Level sensor for detecting the product level in the tank and automatic replenishment by upstream pumps/containers Parts in contact with the product in stainless steel or food-grade design, easy to disassemble for cleaning. Filling valves optionally fixed or with tracking movement to follow the packaging material movement and enable higher outputs

Cone Ice Cream Filler — Machine Description, This industrial Cone Ice Cream Filler is a purpose-built, high-efficiency production machine engineered for automatic filling of pre-formed ice cream cones. Designed for use in commercial frozen dessert facilities, the system delivers precise, hygienic portioning and consistent presentation, even with soft-serve, artisan, or premium ice cream products., Constructed with robust, food-grade stainless steel and sanitary components, the machine supports continuous high-speed operation while ensuring optimal product handling. The precision dosing mechanism gently fills each cone to the exact weight or volume specification, minimizing giveaway and reducing waste., Featuring a smooth indexing conveyor and adjustable fill heads, this filler is ideal for both medium and large-scale production lines. Its design integrates easily into existing workflow ...

Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...

PLC / Microorganism Enumeration System BIOMERIEUX TEMPO READER + 2 x FILLER Year of manufacture: 2020 TEMPO is an automated platform for the analysis of quality indicators. Composition: 1 TEMPO READER module 2 TEMPO FILLER modules With accessories: 2 Intel Core I3 computers 1 barcode scanner. Software Cables Numerous white plastic supports Untested equipment

BIOMERIEUX TEMPO READER + FILLER PLC TEMPO is an automated platform for the analysis of quality indicators. TEMPO READER TEMPO FILLER With accessories: 2 Intel Core I3 computers + screens + keyboards 3 barcode scanners (2 Xenon 1900 + 1 Voyager 1250g). Software Cables Numerous white plastic supports Untested equipment

with control unit, vacuum pump, Fabr. BECKER & Drilling Unit

Ward Bekker Auger Filler Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph

General SKU260W357 LocationBarneveld MakePiab Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4435 (316L) Powder fillercheck Vacuum fillercheck Capacity9 ton/h Information TypeVCP 1200-AF/v.v.C-PA Year of construction2000 Floorspace0,70x0,70 m Total height1,80 m Weight65 kg Extra SpecificationsPIAB vacuum conveyor SpicesPlastic & polymersPowder fillersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicBiotechnologyOther chemicalStarchFine chemicalsTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsPiabIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersPackaging machines > Powder fillersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > ...

TOFFLON VIALS FILLING LINE The line can be adapted to different production modes and can be flexibly connected to lyophilization systems. --- 1) Tofflon Washing Machine FW03024 Year of manufacturing: 2019 Washing machine for vials. PRODUCTION: Filling range: 2-100 ml (ca) • Cleaning speed: 7ml-100VPM • Operation mode: servo drive OTHER CHARACTERISTICS • Size: 2,335 mm × 2,405 mm x 1,450 mm (ca) • Power (kW): 13-15 (ca) --- 2) Tofflon Tunnel, model FT0110 Year of manufacturing: 2019 For cleaning and filling vials. --- 3) Tofflon Filling and Stoppering Machine, model FF0204 Machine for filling and closing vials. --- 4) Tofflon Capping Machine, model FC0210 Year of manufacturing: 2019 For capping closed vials. PRODUCTION • Production range: 2-100ml • Production speed: 10ml-100VPM • Number of capping heads: 6 OTHER CHARACTE ...

OPTIMA SYRINGE, CARTRIDGE AND VIAL FILLING LINE, MODEL SV125 Year of construction: 2018 Machine for filling of various products (syringes, cartridges and vials). MACHINE CHARACTERISTICS Working Height: 1960 mm Control Cabinet: 900 mm ± 15 mm Switch Cabinet Weight: 1020 Kg PRODUCTION CHARACTERISTICS Max Output: 8000 Syringes/hour, 5000 Cartridge/hour Compatible products: Ez-fill Syringe 1 ml long; Ez-fill Cartridge 3 ml Stoppers: Plunger Stopper 1 ml long; 3 ml Plunger Cartridge Nest: Nest 100 Syringe and Cartridge Tub: Tub 3, Tub PP DIMENSIONS Size (W x L x H): 1645 x 5175 x 2450 mm Weight: 2040 Kg

Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 100,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved . Rated capacity 100 cbm Piece 1 new The tank is made of steel built Novembe ...

approx. 70 m³ / 70,000 litres polyester tank, upright standing flat bottomed tank, above ground, with multiple connections and spouts. volume: approx. 70 m³ / 70,000 litres material: polyester / GRP diameter: approx. 3.00 m tank height: approx. 10.00 m overall height: approx. 10.50 m The tank has been newly painted and is in a good condition. The container can be used as a storage tank for liquid feed, whey, molasses, water, slurry, or as rain drip tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offer ...

Cat. No. 12-2665 in a very good condition New price: 10.500€ Measurements and weight: LxHxT: 710 x 430 x 260 mm Weight: 31 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 60,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 25,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilize ...

Electric driven scraped filter tubular sieve insert and 6 internal stainless steel scraperblades. Sieveinserts of 0.4 and 2 mm available, more models on request. Sieve dimensions: diameter 300 mm, length 650 mm, ±0. 61 m² sieve surface, Siveinsert can be changed easily. Pipe connection DN80, DIN 11851 Joints. CIP cleanable. Fully overhauled,as new condition.

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer  ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 40,000 litres Diameter: approx. 2,500 mm Length: approx. 8,720 mm Weight: approx. 7,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet.

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

GRONINGER LIQUID FILLING LINE FILLING AND CLOSING MACHINE DFVK 6000 - STOPPERING MACHINE KVK 108B Anno di costruzione: 2002 Output: 12,000 per hour (200 per min), based on 3ml vial, 1ml fill Filling range: 0,2 ml- 135 ml (equipped with according pumps) Diameter range: 14-35 mm Height: 30-100 mm PLC: Siemens PLC type S7 300 Guarding: Stainless steel frame with safety glass The vial filling and closing line is capable of running in the following ways: - Fill and half-stopper a batch for freeze-drying - Overseal a stoppered batch from after freeze drying process - Fill, stopper and overseal a liquid batch Line under ORABS - Open Restricted Access Barrier System​. Full set of operation manuals and technical documentation. Various spare parts.

Cabinet to store chemical /flammable liquids Justrite Model 25302 Year 2000 Dimensions Width=109cm Depth=45cm Height=114cm Capacity 113 liter Details With self closing doors Available direct

Used SB Machines LZ1-CIP liquid filling line. New 2020. The line includes: 1. LZ1-CIP filling line – This machine is designed for the automatic filling of milk and other liquid products. For filling products with capacities of: 250 ml, 500 ml, 1 L 2. ECA-08 label applicator – for applying single labels to cylindrical containers such as bottles and plastic containers. The label applicator uses paper labels. Manufacturer: Świdnik Trade Year of manufacture: 2016 Power supply: 220/380V, 10A Capacity: 0 ± 6000 units/hour Container diameter: min. Ø 50mm; max. Ø 100mm 3. Automatic wrapping machine – The machine is designed to arrange bottles delivered by a conveyor into packs of 6 or 8 pieces (in two rows), then wrap them in heat-shrink film and move them to a shrink tunnel. Manufacturer: Drewmet s.c. Power supply: 400V, 50Hz Capacity: 0 ± 3000 pcs/h Package dia ...

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, liquid receiver -Manufacturer: Klimal, liquid collector -Type: FM 0.88 (M16/M06) -Pressure: up to 28 bar -Contents: 0.88 liters -Dimensions: Ø 80 x 257 mm -Weight: 0.7 kg

Pressure gauge, flow meter, measurement and control technology, flow meter liquid -Manufacturer: SKT, flow meter for liquid / water -Measuring range: 100 to 1000 l/h -Accuracy class: 4 -Connection: DN 25 -Pmax: 10 bars -Dimensions: 60/60/H390 mm -Weight: 0.8 kg

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Vials filler for inyectables with weight dosing filler and stoppering Output 3.000 vials/h Size range diameter 16 mm / max. 80 mm – height min. 55 mm / max. 200 mm The fill range is 1 up to 1.000 ml with 4 needles Electrical supply 220/380 V 50 Hz Weight 1350 Kg. The machine include a turning table and rabs

P187 - 3x used approx. 43 m³ / 43,000 litres polyester tank, GRP-tank, aboveground, vertically standing, flat floor, in good condition. technical details: capacity: approx. 43 m³ / 43,000 litres material: polyester tank / GRP tank manufacturer: Skoda dimensions: Ø approx. 3.00 m x height approx. 6.50 m Used tanks in good condition, by manufacturer Skoda. Upright standing storage tank with flat bottom, lid on the tank body, multiple connections, inlets and outlets. One tank is equipped with a propeller agitator on the side, functionality not yet tested by us. The container can be used as a storage tank for many different media such as water, liquid feed, fodder, whey, molasses, manure, seeping juice, rapeseed oil or as a rainwater collection tank etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisem ...

Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

Since we have focused our -fischer organics- laboratory service more on peptides / HRMS, we would like to hand over our SFC. The system has the complete equipment, The original price in 2012 was over 250,000 euros net! - Mass detector QDa - Backing pump RE6 - Acquity PDA detector - Acquity Pillar Manager - Acquity Binary Pump 1000bar - Acquity Autosampler - Isocratic UPLC pump - Convergence Manager

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Used Semi-Automatic Pneumatically Actuated Piston Filler for Liquid Media Filling volume max. approx. 1 L