lip used for sale

Lippert belt conveyor GF 15980-750-600 RA2134 Technical data: Conveyor length (NL): 15980 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 15980 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Lippert belt conveyor GF 29400-750-600 RA2131 Technical data: Conveyor length (NL): 29400 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0,66/1,3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 29400 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Lippert belt conveyor GF 19370-750-600 RA2275 Technical data: Conveyor length (NL): 19370 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 19730 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Lippert belt conveyor GF 20520-750-600 RA2276 Technical data: Conveyor length (NL): 20520 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 20520 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW:  ...

Lippert belt conveyor GF 20430-750-600 RA2277 Technical data: Conveyor length (NL): 20430 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 20430 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW:  ...

Lippert belt conveyor GF 28100-750-600 RA2142 Technical data: Conveyor length (NL): 28100 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0,66/1,3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 28100 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Lippert belt conveyor GF 3200-550-400 RA2282 Technical data: Conveying length (NL): 3200 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side gu ...

Lippelt Rustica Mini Square Bread Roll Line - with 3 cutting rollers - with moistening and seed sprinkling - Poppy Rumo - Both machines are mobile on castors - Completely clad in stainless steel - 1.0 kW - Built in 1999

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50H ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Bread roll press Lippelt RotamatManufacturer : LippeltType : Rotamat GS/M30380 Volt, weight range from 30 - to 80 grams30 graduation including 3 knitting platesDetails see picture

 Bread roll line Lippelt Mini RusticaManufacturer : LippeltType : Mini RusticaYear of construction : 99with 2 rollers400 Volt 1.1kBakery conditionWe have 2 pieces in stock for details see picture         

Conveyor belt inclined conveyorManufacturer : LippeltType : inclined conveyorYear of construction : 2010380 V 50Hz 0.12kWAn roll dimensions: W:77cm D: 157cm H: 126cmBelts width 60cmFor details see picture                             

Seeding Station Lippelt Moli 580 Working width: 580 mm One-sided seed application 1x seeding container with brush 1x seeding container with fine and coarse spreading roller Humidification via water bath Pressure roller for attaching the seeds to the dough pieces Wire belts, removable Movable underframe for seed collection container Control with start/stop button, 2x potentiometer for belt speed and the seeding rate and emergency stop button

Panning Unit Lippelt ABLI 580/980 Suitable for trays or boards Working width 580 cm Panning length max. 980 cm Adjustable panning length With separate control Belt speed adjustable Fast or slow panning possible Machine mobile with brakes Optionally with head machine or seeding unit

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, ...

Wide slot nozzle, used, according to signage. 1420 mm width, adjustable lip. Adjustable top lip.7-15mm approx Removable Bottom Lip Vertical Choker bar 20mm infeed port. Decals. Used, purchased as seen, without warranty or other warranty. Delivery ex works CH, immediately upon arrival payment.

Make: Future Tech Model: Twin Screw PET / PP / PS Extrusion Line Condition: Excellent – new after testing. Availability: Immediately Materials: PET / PP / PS (Virgin and Recycled Flake) Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 1100mm Output: 1000kg/hour Main Extruder: 95mm Future Tech UV95 twin screw extruder water cooled Co-Extruder: 65mm Future tech single screw with 30kW ac motor & invertor Running from 0.18mm to 1.2mm thick PET up to 1000kg/hr. Mix of virgin, post consumer bottle flake and skeletal flake. 2 Component volumetric blending system for primary and secondary extruders. 95mm Future Tech UW95/44 twin screw extruder water cooled. 250kW ac motor with inverter drive. Triple vented with liquid ring vacuum pump system. Hydraulic screen changer, dual piston, filter dia Φ180mm, manual control. JCTimes model 275 gear pump with ac motor and  ...

Manufacturer: Future Tech Model: Single Screw PS/PP Extrusion Line Year: 2016 Condition: Excellent Availability: Immediately Materials: PS-PP grnulate Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 750mm Output: 450kg/hour Main Extruder: 120mm single screw extruder air cooled 90kW ac motor & inverter Co-Extruder-1: 65mm single screw with 30kW ac motor & inverter Running from 0.18mm to 1.2mm thick PS/PP up to 450kg/hr. Mix of virgin an regranulate Vented 120 mm extruder with liquid ring vacuum pump system. Screen changers with GOODI systems. Feed block with selector plugs. 750mm wide flex lip single manifold sheet die. Max net width of the sheet is 750mm. Manual T- die. Flex bottom lip. Fixed uper lip. 1100mm wide 3 roll polishing stack with horizontal configuration ( 300mm x 450mm x 450mm diameter). Individual inverter speed drives. Max roll weight 200kG. ...

Model: Single Screw PS/PP Extrusion Line Year: 2012 Condition: Excellent Availability: Immediately Materials: PS-PP grnulate Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 750mm Output: 350kg/hour Main Extruder: 105mm single screw extruder air cooled 120kW ac motor & inverter Co-Extruder-1: 65mm single screw with 30kW ac motor & inverter Co-Extruder-1: 45mm single screw with 20kW ac motor & inverter Running from 0.18mm to 1.2mm thick PS/PP up to 450kg/hr. Mix of virgin an regranulate Vented 105 mm extruder with liquid ring vacuum pump system. Screen changers with GOODI systems. Feed block with selector plugs. 750mm wide flex lip single manifold sheet die. Max net width of the sheet is 750mm. Manual T- die. Flex bottom lip. Fixed uper lip. 1100mm wide 3 roll polishing stack with horizontal configuration ( 300mm x 450mm x 450mm diameter). Individual inverter ...

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

drill diameter: 32 mm drill diameter: 32 mm drilling length: 0 mm drilling length: 0 mm lip angle: ° lip angle: ° total power requirement: kW total power requirement: kW weight of the machine ca.: t weight of the machine ca.: t dimensions of the machine ca.: m dimensions of the machine ca.: m Universal Drill Bit Grinder lots of accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deep hole drilling machine make TBT Tiefbohrtechnik type T 10-250Machine no. 418.311.215, year of construction 1989 with control SIMATIC S5Technical specifications:Max. Drilling depth: 250 mmTable size 420 x 780 mmDrilling area steel ST 60 full drilling: max 16 mm Boring: max 20 mm:Drilling process: ELB (single-lip drilling)Number of drilling spindles: 1Main spindle drive: 2.6 / 3.2 kWSpeeds: 1020 - 4400 rpm: 1960 - 2950 rpm: 2950 - 4400 rpm: 4400 - 8950 rpmFilters: plate filter 60 l / minCooling lubrication system: 670 l deep drilling oilelectrical connection: 380 V, 15 kWExternal dimensions of the system including SS L x W x H: 3850 x 1800 x 2000 mmWeight approx .: 2200 kgWith- SIMATIC S5 115 U ELGO 85 P controller- separate control cabinet- internal cooling- various single-lip drills (see photos)- workpiece counter- coolant system- filter- Central lubrication unit- Instruction manual  ...

Mobile center axle ramp, Butt, 11,80m long, 9 To., – Used - : Price from location: only 9.500.- € (net), incl. loading! Manafacture: Butt Type: BK912 Year of construction: 2009 Load capacity: 9.000kg Total length: 11,800 mm Total width: 2,300 mm Ride width: 1,960 mm Lip width: 2,140 mm Lip length: 400 mm Straight part platform (top): 2,500 mm Drive-over height: 1,100 - 1,750 mm Optimal movement of the ramp due to centrally arranged floating axle with low manoeuvring requirements Easy adjustment of the operating height via manual hydraulic pump Condition: good – very good Available: now Location: Friedrichshafen

NEXTROM FCL21/HS Multi-layer Cast Film Line Materials to be processed: Barrier film / Stretch film / PP film / LDPE Extruders: Number of extruders: Extruder 1: diam. 140 mm; 244 kW motor Extruder 2: diam. 140 mm; 244 kW motor Extruder 3: diam. 75 mm; 120 kW motor Extruder 4: diam. 75 mm; 120 kW motor ABB drives for the extruders 2x90mm screws for trim feeding Die: Flat die type, Cloeren, year 2016 Lip width: 2600 mm Lip gap adjustable: from xx to xxx microns Film thickness 12-35 microns Heating: 64kW + 100 pc heating elements for profile regulation Output: Up to 1000 kg/hour depending on material formulation Chill-Roller: 2700 mm wide diam. 1000mm Winder: NEXTROM Winder, fully automatic roll change  Maximum line speed 900 m/min  Reels diameter up to 500 mm  Winding width 2000 mm Accessories:  Longitudinal film cutting unit   Edge trim cutting syst ...

Line for the assembly of lip gloss / mascaras We offer a practically new (production year: 2018) line for the assembly of lip gloss or mascaras, the manufacturer of which is the Italian company SYCMA. The line consists of the following machines: 1. Machine for mounting the cap (capacity: 2 500 pcs / h) 2. Machine for sealing a bottle with a collar (2 devices; capacity of one: 1,350 pcs / h) 3. Machine for assembling the scraper (capacity 2 160 pcs / h) The line has so far produced only approx. 380,000 pcs.

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

Cheap LAGERCONTAINER 10 feet (3m) ideal as a material/storage container from location DE-83395 Freilassing Delivery at extra cost ! DESCRIPTION / SPECIFICATION Factory-new storage containers in robust and stable design. Welded steel frame made of wood and rolled profiles with corner fittings, stackable. The floor construction consists of steel beams with welded cross beams and a covering made of 28 mm thick, water-resistant glued plywood. The walls were made of a profile plate with a thickness of 1.5 mm and are welded to the frame construction. The roof skin consists of a 2.0 mm thick profile plate. Container doors are equipped with a double lip seal and rotary rod closures. Each container has anti-theft protection and forklift bags. TECHNICAL DATA / TECHNICAL DATA Dimensions outside: length x width x height: approx. 2,991 x 2,438 x 2,591mm Dimensions inside: length x wid ...

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Intestinal holding device Vemag DHV Type 836 for full machine Vemag Without extra accessories: holding rollers, filling tube, brakes and without brake lip. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Description Universal CNC deep hole drilling machine from Degen suitable for tooling, fixture construction, training as well as mold making Travel 750x700x600mm Control SIMATIC OP17 Technical data Universal deep hole drilling machine DEGEN UTB 600 E X,Y manual Z, NC control Axes with digital display Drilling depth max. 900 mm max. drilling diameter 25 mm Spindle holder MK2 Spindle drive 2.6 kW Spindle speed max. 3000 rpm Table adjustment lengthways 750 mm Table adjustment Cross 700 mm Drilling unit vertical 300 mm Drilling swivel +/-20° Table area 650 x 1100 mm Table swivelling by 360° Table load max. 2000 kg 2 separate cooling systems - Spray mist (single-lip deep drills) - Drilling emulsion (spiral drilling) With accessory package and glass protection

Description CLOEREN EPOCH EXTRUSION DIE Type: EPOCH 3301 AUTOGAUGE, IDS Feedblock 5 Layer Dual Plane Die Lip Length 2400 mm Produced Material PP e PE

Fillingmachine,stainless steel,Gasti type 930B,for lip balm etc.

drill diameter: 40 mm drilling length: 500 mm lip angle: 160 ° clearance angle: 1 - 10 ° toolpiece turning speed range: 42 / 28 / 21 U/min feed range: 0,6-1,2-1,5-3,0 mm/min grinding wheel dia. x width: 210 x 127 x 50 mm grinding spindle speed: 3150 U/min total power requirement: 3,3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,0 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: . mm drilling length: . mm lip angle: . ° total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,5x1x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 40 mm drilling length: 500 mm lip angle: 160 ° clearance angle: 1 - 10 ° toolpiece turning speed range: 42/28/21 U/min feed range: 0,6-1,2-1,5-3,0 mm/min grinding wheel size: 210 x 127 x 50 mm grinding spindle speed: 3150 U/min power capacity: 3,3 kW weight of the machine ca.: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2-40 mm drilling length: x mm lip angle: 40-180 ° weight of the machine ca.: 0.4 t Dressing device Point thinning attachment More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3-40 mm drilling length: 500 mm lip angle: 15 - 75 ° total power requirement: 4,1 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,80x1,60x1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3 - 50 mm drilling length: 500 mm lip angle: 90 - 140 ° voltage: 380 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 0,80 x 0,60 x 1,30 m Serial-No.: 76658 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length

Electric scrubber drier, floor cleaning machine DEAWOO type DAFL50A Fabr. No. 22DW01702ALE01-00028 Year of construction 2022 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume Pure water: 50 litres Tank volume Waste water: 50 litres Noise pollution 66 dBa Climbing capacity 2% Battery voltage 24 Volt, 100 AH - Battery charger 24 Volt- Battery 24 Volt , 100 AH - one cleaning brush - two separate tanks - without drive, the device is pushed by hand Dimensions L x W x H 1275 x 850 x 1350 mm Empty weight 160 kg very good condition, as good as new; used

drill diameter: 40 mm turning speeds: 2800 U/min lip angle: 60 - 180 ° relief angle: 3,0 - 25 ° tool length - max.: 344 mm total power requirement: 0,85 kW weight of the machine ca.: 238 kg. range L-W-H: 0,86 x 0,66 x 1,19 m Electric 380 Volt: Base with extraction system: Grinding wheel: 200 mm Twist drill grinding machine for right-hand twist drills, bores with 3 or 4 cutting edges. Tool holder - cylinder or taper shank. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Parts Kit HEIDENHAIN LB 301C 5440 RN N ( LB301C5440RNN ) 2955812-12 Measuring length: 320mm tape measure 329 298-62 end piece 285 620-01 end piece 285 622-01 treadmills 285 630-62 sealing lip Kleinteile New, with documents ! Dimensions ( packaging ): 620 x 520 x 230 mm

Clamping table, milling table, T-slot plate MAHO Clamping area: 900 x 460 mm 7 grooves Groove width: 14 / 24 mm groove depth: 25 mm < br />Mounting side: 6x bore Ø 14 mm Groove width: 14 mm Groove depth: 5 mm lip width 50mm groove center to groove center i.e. 74mm spare part for milling machine MAHO MH600E !, among others used, tested ! Dimensions: 900 x 470 x 270 mm