128,847 used machines on RESALE, but how to find them? Machine Search
Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Graco, air-operated double diaphragm pump -Type: Husky 515 D51211 -Flow rate: 15 - 60 l/min -Discharge pressure: 7 bar -Total dimensions: 260/200/H270 mm -Weight: 3.8 kg
Knapp roller conveyor accumulation 12720-510-450 RA2379 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 12720 mm in 7 Elements. Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller conveyors Drive: 30mm Belt Height frame: 90 mm Conveyor speed: 0,5m/s Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 Conveyor speed m / s: 0,5 Roll division in mm: 60 Jam detection: Lichtschranke Construction year: 2022 Engine type: SEW Getriebemotor Conveying length in mm: 12720 Stowage spaces: 23 For individual, expert ...
Knapp roller conveyor 540-510-450 RA2384 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 540 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 540 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
Knapp roller conveyor 570-510-450 RA2383 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 570 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides ...
Knapp roller conveyor 600-510-450 RA2385 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 600 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
Knapp roller conveyor 510-510-450 RA2386 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 510 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 510 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
Knapp angled roller conveyor 600-510-450 RA2387 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V condition: Ausstellungsstück Construction year: 2022 angle: 7,7° Conveying length in mm: 600 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For ...
rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg
DIVISIO 5100 (2023) Machine Type: Automatic Depaneling System Model: DIVISIO 5100 Transport height: 920 mm ± 50 mm Max. transport width: 460 mm Interface: SMEMA, Hermes, Siemens Transfer direction: Left to right or right to left Operating side: Front of the machine Fixed rail: Front of the machine Panel length: 70 to 460 mm Panel width: 50 to 460 mm Panel thickness: 0.5 to 5.0 mm Max. panel weight: 1.5 kg Max. PCB weight: 1.5 kg Component height, spindle-side: 8 mm; partial 18 mm (other height on request) Component height, gripper-side: 40 mm Trays on lane 2: 600 x 400 mm Power supply: 400V, 208V 50/60Hz, ±10% Power supply system: 3L + N + PE Fuse protection: 3x C16 A without ELCB Power consumption (without suction): 0.8 kW Air supply: 6 bar Air consumption: 120 Nl/min Machine dimensions (L x W x H): 1200 x 2360 x 2152 mm Weight: 1800 kg (standard equipped) ...
Manufacturer: Homag, Type: CPU Umlade-RAM 512 I/O, Serial number: 2-083-01-5004, Systemconfiguration: PC Steuerung CPU , Year: 1992, Year :1992
pressure: 28 t distance between columns: 510 mm dayligth: 380 mm stroke: 260 mm weight of the machine ca.: ca. 750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device
Description RACK CARDS Keba EC100 A03/MONO/4MB/51563
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 009 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 150/125/H120 mm -Weight: 3.7 kg
Manufacturer: Beyeler Model: CC 5150X25 E Year of Manufacture: 1980 Type of Machine: Hydraulic Guillotine Shear Material Thickness Capacity: 25 mm Weight: ~48,000 kg Dimensions (LxWxH): 6.5 m x 4 m x 3.5 m Find more here - / Contact us at -
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 1 517 222 492 -Shaft: Ø 16 / 17 x 8 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 116/90/H120 mm -Weight: 2.7 kg
socket, switch socket, wall socket -Manufacturer: Mennekes, CEE socket switchable unused Ovp -Type: 5103 AE -Quantity: 15 x wall socket available -Price: per piece -Price/Delivery: complete -Dimensions box: 300/170/H140 mm -Weight: 1.2 kg/piece
Here is the German translation of your text: This LPG tank with a capacity of 6400 litres is designed for the safe storage of LPG and meets the strictest European standards. It is manufactured in accordance with the Pressure Equipment Directive (PED) – 2014/68/EU and the EN 13110 standard, which applies to above-ground or underground stationary liquid gas tanks. ✅ Capacity: 6400 liters ✅ Compliance: PED 2014/68/EU ✅ Standard: EN 13110 – Stationary LPG tanks ✅ Installation: Above ground or underground possible Optionally, we offer: Compatible valves and accessories A metal frame for the installation of the tank
FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 21000, 11000, 13000, 2000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 12000, 14000, 15000, 16000, 17000, 18000, 19000 Nominal / outsid ...
Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Controling and pneumatic included Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2880 Nominal / outside width in mm: 510 Belt width in mm: 400 Driven: YES Engine type: Trommelmotor KW: 0,55/S1 Conveyor speed m / s: freely adj ...
12 position upper turret (6 are driven) -10 positionlower turret (5 are driven) - sub spindle - 2 x C axis - equipped with Lns Sprint S2 bar loader with front magazine, fixed and driven tool holders, manuals - Fanuc 18T Control
cutting diameter: 330 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: square: 320 x 320 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc.
Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.
Limit switches, push buttons, safety switches, position switches -AC-12 10 A 230 V -AC-15 6 A 230 V -DC-13 6 A 24 V Price: per piece Quantity: 5 available -Weight: 1 kg
Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available.
SHRINK WRAPPER, CRYOVAC, TYPE: CJ 51T LH Technical description: Power supply: 380-440 V / 50-60Hz Power: 15 Kw Bandwidht: 250 mm Clearance: 270 x 130 mm Dimensions: 2100 x 900 x 1600 mm
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 510 mm -Length: 350 mm -Height: 60 mm -Dimensions: 510/500/H190 mm -Weight: 120 kg
Yamato ADW 514 multihead weigher, MHW : Yamato Sigma 514SV, Ingress Protection: :IP65, Weighing capacity : 20 - 2000 grams per dump, Weighing volume : max. 5 liter per dump, Configuration Details:, Machine completely built in 304 Stainless steel., TC : 15 degrees, vibratory type, LFP’s : Sigma Type, Feed Buckets : Double door opening, Bucket volume : > 2,5 liter, Weigh Buckets : Double door opening, Bucket volume : > 2.5 liter, Collating chutes : 60 degrees, HMI : RCU810 color touch screen, The model comes with a newer upgraded RCU (control panel)., MHW: Yamato Sigma 514SV, HMI: RCU810 color touch screen, Bucket volume: > 2.5 liter
workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...
Inductive sensor Manufacturer: Balluff -Type: BES 516-324-S4-C -Condition: unused stock -Quantity: 4 pieces available Price: per piece -Weight: 0.1 kg
Row limit switch, push button, limit switch -Type: BNS 519-D03 R16-100-10-FD Price: per piece Quantity: 2 available -Weight: 1 kg
Inductive sensor Manufacturer: Balluff -Type: BES 515-356-E4-Y -Quantity: 30x Available Price: per piece -Weight: 0.2 kg
A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.
Terminal boxes, aluminum housings, housing systems, Klippon -Type: 07-5107 -EX: protected Price: per piece -Quantity: 7x Available -Weight: 0.4 kg
Control: Manufacture: FANUC 18i-MB x-travel: 510 mm y-travel: 360 mm z-travel: 300 mm table surface area: 600 x 360 mm spindle turning speed - stepless: 12000 U/min dimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmm weight of the machine ca.: 2.6 t tool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
center hole: 2-50 mm workpiece diameter: 8-125 mm workpiece length - min.: 50 mm workpiece length - max.: 1000 mm column - center height: 145 mm grinding wheel speeds:: number: 3 from/to: 13000-45000 U/min spindle turning speed range: 400 U/min dimensions of the machine ca.: 750x850x1800 mm weight of the machine ca.: 475 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-510-450 RA2417 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: nominal voltage: 24V, 380-500V Construction year: 2015 condition: Ausstellungsstück Conveyin ...
Mazak VTC-41 L X: 1660 - Y: 410 - Z: 510 mm CNC X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Table dimensions: 2000 x 410 mm Max weight on the table: 800 kg Depth of throat (uprights-spindlecenter): 460 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 11/7,5/5,5 kW Drilling-capacity: max dia 25 mm Tapping-capacity: max M24 Control : Mazatrol Number of axes: 3 axes Toolchanger: yes Number of rotations: 7000 rpm Length: 3900 mm Depth: 3050 mm Height: 2700 mm Weight: 6 ton
Chevalier X: 850 - Y: 510 - Z: 510 mm CNC X-axis: 850 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 1000 x 450 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 7,5 kW Control : Siemens 810 Number of axes: 3 axes Toolchanger: yes Number of toolholders: 20 positions Number of rotations: 8000 rpm
Mazatrol 640 M Nexus Travel X-axis: 1,050 mm Y-axis: 510 mm Z-axis: 510 mm Distance spindle nose to table surface 150-660 mm Rapid traverse – feed Rapid traverse (X/Y/Z) 50 m/min Cutting feed speed: (X/Y/Z): 50,000 mm/min SK-40 DIN69781 Milling spindle Drive power: 30/22 kW Max. spindle speed: 15,000 rpm SK-40 DIN69781 Table size 1,300 x 550 mm max. table load 1,200 kg Tool magazine / ATC Number of tool positions: 30 Max. tool diameter: 80 mm Max. tool diameter with free adjacent space: 125 mm Max. tool length: 350 mm Max. tool weight: 8kg More options Cooling by the spindle Tool length measurement Mazak Monitoring System B, incl. Renishaw OMP60 probe Chip conveyor, – ejection left Cover rinse High pressure pump, 15 bar Made in Japan
Inv. Num. : 8503 Type: Topper TMV-510T Producer: Tongtai Created: 2008 Parameters: Control system: Fanuc 0i-MF Plus Operating hours: 2532 h Work table length: 600 mm Work table width: 360 mm X-axis travel: 510 mm Y-axis travel: 360 mm Travel Z axis: 300 mm Speed: 8000 1/min Spindle power: 5.5 kW Cone: BT-30 Number of all tools: 20 pieces Number of axles: 5 pieces Rapid traverse X/Y/Z: 48 m/min Machine height: 2310 mm Machine length: 2700 mm Machine width: 1600 mm Machine weight: 2000 kg Equipment: Renishaw tool probe Grips CNC-controlled 5th axis TSUDAKOMA TN-101
Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used
used
x-travel: . mm y-travel: . mm z-travel: . mm control: Mazatrol M-32 spindle turning speed range: 6000 U/min workpiece length - max.: 1300 mm workpiece width - max.: 550 mm workpiece height max.: 600 mm Workpiece mass max.: 1500 tool length - max.: 400 mm diameter of tools max.: D= 125 mm diameter of tools max.: freie Nachbarplätze D=260 mm Tol measurements: 20 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...
4 x Ceramic jacketed radiant tubes 514736 4 x Ceramic Jacketed Radiant Tubes 514736 L= 1520 mm OD= 128 mm More items - new and used - can be found in our shop! International shipping costs on request!
maximum number of results exceeded
please refine your search
