line of manufacture used for sale

General SKU291Y494 LocationBarneveld MakeBecomix TypeDH 1200 No.Unknown Main Features MaterialStainless steel Motor22 KW Rotor165 mm Specified Features - Inline mixer Rotor sizesø 165 x 45 mm Inletø 100 mm Outletø 75 mm Number of stages:1 (single rotor/stator, reversible DUO) Capacity± 1,200 l./min With mechanical sealcheck Motor± 22–37 kW Rotor speed± 3,000 rpm MaterialStainless steel 1.4408 General Year of constructionUnknown (est. ~1998–2010) Mounted on framecheck Floorspace1 x 0,65 m Total height0,75 m Weight350 kg Extra SpecificationsBECOMIX DH-1200 DUO inline rotor/stator homogenizer with 2nd product supply connection.Oils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsInline high shear mixersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeverag ...

Manufacturer: Scheugenpflug Type of machine: Casting and potting plant line Year of manufacture: Individual components dated 2022 and 2023. Operating history: The system was in operation from approximately August 2022 until the end of 2023 and ran without problems until the line was shut down The line is composed of the following main components. 1. Potting cell with axle system - Type: CNCell - Built in 2022 - Air pressure: 6 bar - Power supply: 400V 3~/N/PE. - Power frequency: 50/60 Hz - Power input: 8.6 kVA - Rated current: 13.8 A - Control voltage: 24 V DC 2. PTS preheating oven - two lanes - Type: FC Curing Oven FC-5Z-57-P-2S-6050-100 - Year of construction: 2022. - Nominal temperature: 100 degrees Celsius - Throughput time can be individually adjusted. 3. Barrel stirring station - Type: Barrel Agitator Station - Built in 2023 - Weight: 800 kg - Air pressure: 6 bar - Power ...

turning diameter: max. 560 mm turning length: 600 mm control: 840D powerline Siemens greates pass round over bed: 680 mm Swing dia. over traverse guideway: 565 mm centre distance: 620 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 37 kW max. Torque: 390 Nm spindle nose: 170H5 spindle bearing diameter: 120 mm usable bar diameter: 65 mm max. chucking diameter: 250 mm C-Axis: 0,025° / 360 ° Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1 power capacity - Sub spindle: 25 / 33 kW max. Torque: 213 Nm spindle bearing diameter: 90 mm spindle bore: 57 mm spindle nose: 140H5 C-Axis: 0,025° / 360 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tools: max. 4.500 min -1 power capacity - driven tools: 12,2 kW tool taper: VDI 40 DIN 69880 Tool dimensions with sq ...

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...

x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm Control: SIEMENS 810D powerline table dimensions: 850 x 630 mm table load capacity: 600 KG tool magacine with: 30 Plätzen spindle turning speed range: 12.000 U/min total power requirement: 42 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor coolant / belt filter system Interlit SPB 3/600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mm y-travel: 650 mm z-travel: 650 mm total power requirement: kW weight of the machine ca.: 12 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: - mm grinding width: - mm workpiece height: - mm workpiece diameter: - mm material thickness: - mm centre distance: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 4104 Throughfeed grinding / deburring machine LINEAR ABRASIVE Isolde The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm control: Siemens 840 D total power requirement: 19 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 5 x 4 x 3 m No. 5312: Vertical machining center DECKEL MAHO type DMC 64 V linear year of construction 2007 Working area: 640 x 600 x 500 mm Drive power: 13/19 kW Equipment: Table 850 x 600 mm ( WITHOUT the clamping devices shown ) Preparation 4th axis Production package / IKZ 40 bar: BFA 600 cooling lubricant cleaning system Integrated spiral chip conveyor Separate scraper belt chip conveyor documentation Miscellaneous: Spindle ISO 40 Speed range 1-12,000 min-1 Space requirement see sketch Transport dimensions approx. 6.5 loading meters Weight approx. 8.8 tons The machine is ready for operation with wear and tear due to age and use. Short video: https://www.youtube.com/watch?v=sDkgx4BYXeY Special price ex works EXW - free l ...

DMG DMC 64 V linear ist ein Vertikal Bearbeitungszenter für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 850×630 mm, Zuladung 600 kg; Verfahrwege X 640 mm, Y 600 mm, Z 500 mm; Werkzeugmagazin 30 Plätze (Ø 80 mm / max Ø 140 mm), Werkzeuglänge 300 mm, Werkzeuggewicht max 7 kg, Wechsel 5 s. Spindel BT40 1–12000 t/min, Leistung 19/13 kW, Drehmoment 100/70 Nm; Vorschub 0–40000 mm/min; Eilgänge X 60 m/min, Y/Z 40 m/min; Netz 3x400 V 50 Hz, Druckluft 6 bar, Gesamtleistung 42 kVA; Gewicht 6500 kg; Abmessungen 3400×2500×3300 mm. Zubehör: Werkstücktaster Heidenhain TS 642, elektronisches Handrad. Erreicht enge Toleranzen; Einsatz in Automotive, Luftfahrt, Medizintechnik, Werkzeugbau und Uhrenindustrie. Technische Daten ohne Gewähr

DMG DMC 75 V linear ist ein 5-Achsen-Bearbeitungszentrum, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Verfahrwege X 885 mm, Y 600 mm, Z 600 mm; Tischbelastung max. 600 kg; B-Achse +10/-110°; C-Achse 360°; Tischdrehzahl 100 t/min; Werkzeugmagazin 60 Plätze, Werkzeug-Ø max 40 mm, Länge 300 mm; Aufnahme HSK-A63. Technische Angaben: Spindel 0–28.000 min-¹ (stufenlos), Leistung 55/43,5 kW; Eilgang 90 m/min; Druckluft 6 bar; Netz 3x400 V 50 Hz; Gewicht ~11.000 kg; Abmessungen L3255×B2450×H3150 mm. Zubehör: Hochdruck-Kühlmittel 60 bar, Späneförderer, elektronisches Handrad. Erreicht enge Toleranzen; typisch für Automotive, Luftfahrt, Medizin, Uhrmacherei und Maschinenbau Technische Daten ohne Gewähr

DMG HSC 55 linear ist ein 5-Achsen Bearbeitungszenter mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. X450 mm, Y650 mm, Z460 mm; A -10/+110°; Magazin 120 Plätze; Werkzeug-Ø 80 mm; Länge 250 mm; Gewicht max 6 kg; Aufnahme HSK63. Spindel 2–28000 t/min, Leistung 38/28 kW; 50Hz 3x400 V; Gesamtbedarf 70 kVA; Maschinengewicht ~9500 kg; Maße L3210×B2930×H2900 mm. Erreicht enge Toleranzen; Einsatz in Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie und Werkzeugmaschinenbau. Technische Daten ohne Gewähr

DMG HSC 55 linear ist ein 5-Achsen Bearbeitungszenter, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Verfahrwege X 450 mm, Y 650 mm, Z 460 mm; A -10/+110°; Werkzeugmagazin 120 Plätze; Ø Werkzeug max 80 mm, Länge 250 mm, Gewicht 6 kg; Aufnahme HSK 63. Spindel stufenlos 2–28.000 t/min; Spindelleistung 38/28 kW; Anschluss 50 Hz 3x 400 V; Gesamtleistungsbedarf 70 kVA; Maschinengewicht ca. 9.500 kg; Abmessungen L3210 × B2930 × H2900 mm. Ermöglicht enge Toleranzen; typ. Anwendungen: Automotive, Uhrenindustrie, Maschinenbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

DMG HSC 55 linear ist ein 5-Achsen Bearbeitungszenter, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Verfahrwege X 450 mm, Y 650 mm, Z 460 mm; A-Achse -10/+110°; Magazin 60 Plätze; Werkzeug-Ø max 80 mm, Länge 250 mm, Gewicht 6 kg; Aufnahme HSK 63. Spindeldrehzahl von 2 t/min bis 28000 t/min; Spindelleistung 38/28 kW; Anschluss 3x 400 V 50 Hz; Gesamtbedarf 70 kVA; Maschinengewicht ~9500 kg; Abmessungen L 3210 × B 2930 × H 2900 mm. Ermöglicht enge Toleranzen; typische Branchen: Automobil, Uhren, Werkzeugmaschinen, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

DMG HSC 55 linear ist ein 5-Achsen-Bearbeitungszentrum, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Verfahrwege X 450 mm, Y 650 mm, Z 460 mm; A-Achse -10/+110°; Werkzeugmagazin 120 Plätze; Werkzeug-Ø max. 80 mm, Länge 250 mm, Gewicht 6 kg; Aufnahme HSK 63. Spindeldrehzahl 2–28.000 min-¹; Spindelleistung 38/28 kW; Anschluss 3x400 V 50 Hz; Gesamtleistung 70 kVA; Gewicht ~9500 kg; Abmessungen L3210×B2930×H2900 mm. Eignet sich für engste Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhren- und Werkzeugbau. Technische Daten ohne Gewähr

FOREST-LINE SERAMILL V3 270 2T ist ein Portal Fräswerk für hochpräzise Bearbeitungen, hohe Genauigkeit und Prozesszuverlässigkeit. Technische Kapazitäten: 2 Tische (Längen 3000 mm und 4000 mm, Breite 2000 mm), X-Achse 5000 mm (bei 1 Tisch), Y 3400 mm, Z 1250 mm, Achsen A ±135°/2.5° und C 360°/2.5°; Durchgang zwischen Ständern 2700 mm, max. Werkstückgewicht auf Tisch 10.000 kg. Hauptdaten: Spindelaufnahme SK50, Drehzahlen 10–6000 t/min, Spindelmotor 31 kW, Drehmoment 430 Nm, Gesamtleistungsbedarf 90 kVA; Vorschübe Achsen 1–30.000 mm/min; Eilgang X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; Anschluss 3x 400 V 50 Hz. Ausstattung: Werkzeugmagazin 120 Plätze, Werkzeughalter 700 pce, automatische Werkzeugvermessung BLUM, Werkstücktaster M&H. Erreicht enge Toleranzen; geeignet für Automotive, Luft- und Raumfahrt, Werkzeugmaschinenbau, Medizintechnik und Uhrenindust ...

ROSA LINEA IRON 11.6 ist eine CNC Flachschleifmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 1100×500 mm; Führungswege X 1350 mm, Z 650 mm; max. Werkstückgewicht 1100 kg; Schleiflänge 1200 mm; Schleifbreite 650 mm; Schleifscheibe Ø400×100 mm, Bohrung 127 mm. Technische Daten: Drehzahl Scheibe fix 1500 t/min; Tischgeschwindigkeit 1–40 m/min; Quervorschub stufenlos 1–3 m/min; Anschluss 3x400 V 50 Hz; Maschinengewicht ~6400 kg; Abmessungen 5500×2490×2600 mm. Zubehör: Kühlmitteleinrichtung, Papierfilteranlage, Magnetplatte 1100×500 mm, Schleifscheibe mit Flansch. Ermöglicht enge Toleranzen; Anwendungen: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

For sale is a Kurtz automatic molding machine of the type A-Line, built in 2010, The machine is equipped with a tool for EPS plates and a manipulator. The condition is very good and can be visited under power by prior appointment.

X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation.

x-travel: 400 mm y-travel: 400 mm z-travel: 375 mm control: Siemens 840D sl Linear total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel Maho 4-axis CNC milling machine DMC 64 V linear Working Range: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - With 520 Heidenhain control - With coolant system + paper filter - Probe preparation, but probe is missing - Few operating hours - Machine is first owned - from the production of individual parts of precision parts - All 4 axes can be moved, only the transmitter of the main spindle is defective Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or ...

CNC Lathe Manufacturer: Gildemeister Type: CTX 420 Linear V4 Machine No.: 02260005181 Year of Make: 2005 Control: Siemens 840D ShopTurn Circumferential diameter: 680 Chuck diameter: 250 Drive power: 40/ 100% ED: 37/25 KW Speed range from – to: 20-5000 rpm Weight approx.: 6500 Kg - 12-speed revolver - VDI 40 - C-axis - Y-axis - Powered tools 12 stations - Chip conveyors - Tailstock - SMW Autoblok 250 BH Errors excepted

Key data: 1040 mm, 600 mm, 500 mm

Manufacturer: DMG Model: DMC 104V linear Year: 2006 Condition: Used Stock number: 9445 Control system: HEIDENHAIN iTNC 530 Switch-on hours: 60797 h Hours: 23735 h Work table length: 1250 mm Work table width: 600 mm Maximum table load (uniform): 800 kg Maximum spindle speed: 12000 1/min X-axis travel: 1040 mm Y-axis travel: 600 mm Travel Z axis: 500 mm Cone: SK 40 Tool magazine capacity: 30 Machine height: 2800 mm Machine length: 4060 mm Machine width: 2450 mm Machine weight: 8800 kg Equipment: Air conditioning in the electric cabinet Spindle temperature Oil mist extraction Workpiece Probe

This DECKEL MAHO DMF 250 linear machining center from 2006 features a HEIDENHAIN iTNC530 controller and 4-axis capability with a B-axis tilting ±105°. The machine offers generous travels of 2,500 mm (X), 920 mm (Y), and 820 mm (Z), combined with a robust 3,100x900 mm table supporting up to 3,000 kg workpiece load. Equipped with an HSK-A63 spindle delivering 35 kW power and speeds from 20 to 18,000 rpm, it handles demanding milling and drilling operations efficiently. A 120-position tool magazine ensures flexible production. Rapid traverse rates reach 100 m/min on the X-axis. Available now through MBR Machinery—contact us for detailed specifications and viewing.

x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...

Linear scale to fill free-flowing, dry products such as coffee beans, tea, granules, grain or animal feed into bags. Also suitable for powders and difficult products! Closed system. Conversion to cans, cups or buckets possible. German make. Very good condition. Tested and functional. Pneumatic Retaining Cylinders With hopper, about 100 liters, made of flexible material and with punchers to avoid bridging in the hopper. For safe separation organic - conventional, a second, different coloured hopper can be made (additional option). Video link shows a similar machine Subject to prior sale.

3D -Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U -shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash -off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal450 mmCross580 mmVertical460 mmTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Special equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

x-travel: 2500 mm y-travel: 920 mm z-travel: 820 mm Control: Heidenhain iTNC 530 table surface area: 3100 x 900 mm table load: 3,0 t tool taper: HSK-A63 spindle turning speed range: 20 - 18000 U/min rapid traverse: (X,Y,Z) 100 / 60 / 60 m/min main drive: (S1/S6) 35 / 25 kW total power requirement: 92 kVA weight of the machine ca.: 25,6 t dimensions of the machine ca.: 10,3 x 6,2 x 3,3 m Operating hours: 113520 h Total spindle hours: 58190 h (date: 3rd September 2026) In April 2026, a new milling spindle from DMG-MORI was installed. Since then only 25 running hours ! 4-axes controlled CNC control HEIDENHAIN iTNC 530 Autom. swivel-type milling head (B-axis) +/- 105 deg. 120-station ATC Chip conveyor Tool measuring device (laser) Electronic handwheel Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools. The data for this ad was creat ...

TBA 19 20 V 125 Slim complete line in excellent condition. PLC upgraded to RX3i TSA 21 2003 Multi Shrink Carton Sealer Manual Conveyor Hours: 68632

TBA 19 200 slim line with HI kit was producing 180 ML Hours 65238 PLC upgraded to RX3i TSA 21 2004 Multishrink Conveyors

CNC bar-fed lathe, year 2008, CNC 840D powerline. Used machine in good condition. More info & price on IndustrialBuyer.

Main tent approx. 2,145 m². Modular aluminium system, longitudinal grid approx. 5.00 m. In addition, according to the test book, free-standing porch/canopy construction with open gable, 10 m or 15 m deep; their additional area is deliberately not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

Main tent approx. 1,815 m². Separately usable LOSBERGER system with modular aluminium system and approx. 5.00 m longitudinal grid. Also with 10 m or 15 m deep porch/canopy construction with open gable according to documents; additional area not included in the reference area. Own test book; approval extended until 2028 according to the current state of documents.

Used machine DMU 40eVo linear Machine Type: CNC 5-Axis Milling Center Model: DMU 40eVo linear Manufacturer: DMGMORI Control:CELOS Siemens 840D sl Operate Year of Make: 2022 #001431 Location: Germany Technical data Travel range X-axis approx. 400 mm Y-axis approx. 400 mm Z-axis approx. 375 mm C-axis 360° B-axis -5/+110 ° Workpiece diameter approx. 450 mm Workpiece weight max. approx. 250 kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 KW Number of tool positions approx. 120 Rapid traverse approx. 80 m/min Pick-up taper approx. HSK63 Additional axles approx. 2 4th/5th Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 32 kVA Footprint L x W x H approx. 2.05x2.85x2.53 m (without pallet pool) Machine weight approx. 7,500 kg Facilities Dynamic Package for DMU 40 eVo linear - Motor Spindle speedMASTER® HSK-A63 RPM 20-20,0 ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:160 mm turning length:300 mm control:Siemens 840D Spindle 1 Power:22 kW Spindle 1 RPM:5000 1/min Spindle 1 max. bar diameter:65 Spindle 1 Torque:150 Nm Spindle 2 power:16,8 kW Spindle 2 RPM:5000 1/min Spindle 2 torque:100 Nm Travel for pick up of 2nd Spindle:W2=690 mm dimensions of the machine ca.:´4,5x2,0x2,3 m weight of the machine ca.:9 t CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps

turning diameter:325 mm turning length:600 mm total power requirement:35 kW spindle drive:25 kW spindle turning speed range:5000 U/min speeds of tool:4500 U/min rapid traverse X-axis:60 m/min diverse toolholders:VDI 40 rapid traverse Z-axis:45 m/min weight of the machine ca.:6,5 t dimensions of the machine ca.:3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...

Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, A conversion and automation was carried out by Esau & Huber in 2007., 2 tanks for yeast propagation each: 80 hl total volume, 2 tanks for yeast storage each: 80 hl total volume, Material: stainless steel, Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Auction-ID: A7-49599-3

Professional office set suitable for administrative departments, industrial workshops, technical offices, quality control, logistics or maintenance. This workstation allows the rapid development of a complete administrative space with dual computer displays, document printing and filing solutions. Ideal for companies, design offices, mechanical workshops, quality departments or professional furniture dealers. Auction-ID: A1-48554-1066

Professional computer workstation for technical offices, mechanical workshops, quality departments, industrial maintenance, production or administration. The set includes a functional desk with dual Samsung SyncMaster SA850 display allowing comfortable work on technical software, ERP, CAD, quality control or administrative management. Suitable for industrial companies, mechanical workshops, design offices or professional furniture dealers. Auction-ID: A1-48554-1067

Auction-ID: A7-49599-14

Auction-ID: A7-49599-75

Auction-ID: A1-49846-423

For sale twist-off production line with knurling/lining machine CEPEDA MF 8 E. Perfect working condition. Speed 200-250 cpm.