126,702 used machines on RESALE, but how to find them? Machine Search
weight max. in kg: 8 t Number of working hours: 2633 h height of stroke: 3750 mm weight of the machine ca.: 11600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used
Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery
Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140
Electronic crane scale MWT type 142Fabr. No.: 142571 year of construction 1993Tensile force meter, crane scaleMeasuring range: 2,500 to 80,000 kgSmallest measured value: 20 kgPower supply via 12 volts Cordless suspension shackle for double hooks, anchor hook operation, storage of the measured values and tare via remote control- Memory for measured values (weights)- Printer for measured valuesVery solid and high-quality body made of steelWeight: approx. 200 kg; used
Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge
Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,
Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.
From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...
weight max. in kg: 3000 kg Number of working hours: 5980 h weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stroke: 5 m Number of working hours: 18800 h : 55 % weight of the machine ca.: 4,84 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.9 m, Overall length= 1.3 m, Overall width= 3.5 m, Net weight= 1110 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,
Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,
Height=1.26 m, Overall length= 0.5 m, Overall width= 1.7 m, Net weight= 120 kg,
Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.
A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.
Height=1.8 m, Overall length= 1.9 m, Overall width= 0.85 m, Net weight= 640 kg,
Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm
Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software
Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons
Inv. Num. : 8726 Type: VL 1750 Producer: Koplast Created: 2009 Parameters: Total power: 39.6 kW Length: 3200 mm Width: 2300 mm Height: 2950 mm Weight: 1500 kg Equipment: Technical documentation The machine is equipped with: Digitally controlled top and bottom heating BECKER vacuum system Infinitely adjustable table stroke Manual and automatic control Suitable for plastic molds (PVC/PMMA/PET/PC/ABS...)
Rheon Cornucopia Type: KN200 Pieces of dough: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on castors Height: 160cm Width: 80cm Depth: 150cm
Used machine in top condition Edge milling machine for simultaneous upper and lower flush milling of protruding edges such as PVC, ABS, melamine and real wood veneer. Milling of the edge can be carried out on square, round, curved, workpieces with outer and inner radius. The machine is the ideal complement to the edge banding machine B 56, B 560. The two vertically operating HF flush milling motors, 18000 rpm, are equipped with indexable insert knives (R=2 mm). With driving equipment. Pull-out support at the front. Pneumatic excavation. Control panel position : top Total connection: 2 kW Working height or feed table height : 850 mm Workpiece thickness (radius milling): approx. 16-55 mm Workpiece width min. approx. 30 mm Edge thickness: 0.4-3.0mm Inner wheels min. approx. 50 mm Weight approx. : 155 kg Dimensions : approx. 1000 x 750 mm
A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
NEW, 219 kg weight, 2 cylinders, with Euro mount
Pallet fork 2 t with Bobcat 90 cm holder, FEM2, tine carrier 102 cm
2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount
NEW, FEM3A, 4.5 t load capacity, with 120 cm long tines, with Manitou attachment, 246 kg dead weight
NEW, - 150cm width, - 219 kg dead weight, - 2 cylinders, with Merlo mount, photos are only an example !
NEW Pallet fork 1200 x 120 x 50 mm FEM 2A 2.5 t load capacity Carrier width 1.20 m with Liebherr 506 attachment
BIG pallet fork with Bobcat 114cm attachment, NEW, - Pallet fork 1200x80x40 mm, - FEM 2A, - Capacity: 2000 kg, - Carrier width: 1.20 m, - mass: 159 kg, with Bobcat 114cm attachment
BIG pallet fork with Bobcat 114cm attachment, NEW, - Pallet fork 1200x80x40 mm, - FEM 2A, - Capacity: 2000 kg, - Carrier width: 1.20 m, - mass: 159 kg, with Bobcat 114cm attachment
NEW, pallet fork 200 cm wide, 4.5 t tines, 120 cm long tines, with Volvo BM mount
NEW: FEM3 holder, 3.5t pallet tines, beam width 120cm
suitable for forklift Telelader and wheel loader with standard Pallet rack attachment
180cm extension length, Suitable for tines up to max 130x50mm, ⬠230,- excl. VAT (per pair)
maximum number of results exceeded
please refine your search
