line for juice used for sale

Hours can still change. Auction-ID: A1-46030-13

Forestry blade 3-point attachment home-made on the basis of a mini excavator blade Auction-ID: A3-43520-36008

Auction-ID: A3-43520-5076

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Front and rear work lights, flash light, suspension seat Auction-ID: A3-43519-259

4 cylinder, engine runs but not with starter motor Auction-ID: A3-43520-17015

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 4000 kg stroke: 3200 mm fork length: . mm power fuel: Diesel weight of the machine ca.: 6,43 t dimensions of the machine ca.: 4,8x1,5x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New stacker Bluetooth Auction-ID: A3-43519-21343

Auction-ID: A1-45979-128

Auction-ID: A1-43429-203

FT-1600 Serial Number : FS417148 Trailer 1600kg 2000mmx1250mmx300mm https://foresteel.eu/product/ft-1600-tipping-trailer/ Auction-ID: A3-43520-5009

Auction-ID: A1-43429-204

Runs erratically Auction-ID: A1-43429-202

Front and rear work lights, new battery with automatic filling, flash light Auction-ID: A3-43519-266

New, compact mini forklift Auction-ID: A3-43519-21344

Broken down - the reason for the failure is unknown Auction-ID: A3-43519-35599

Auction-ID: A3-43519-21345

working condition; tread tires well; can be loaded by seller Auction-ID: A3-43519-10059

Auction-ID: A1-43429-205

Without charger Auction-ID: A1-43429-209

LED work lights, flash light Auction-ID: A3-43519-267

Auction-ID: A1-40136-37

Auction-ID: A1-41964-3

Gas bottle not included Auction-ID: A1-41964-30

Alternator does not recharge, weak battery. Auction-ID: A1-40136-39

Auction-ID: A1-42015-132

Engine does not run, meter time reading defective Auction-ID: A1-40136-286

Gas bottle not included Auction-ID: A1-41964-22

mechanical force transducer, force measuring bracket FORCE GAUGES HALLE 0 - 10 kN 1 t in wooden box Dimensions: 250 x 150 x 85 mm

mechanical force transducer, force measuring bracket FORCE MEASURING INSTRUMENTS HALLE 0 - 2000 N 200 kg in wooden box Dimensions: 250 x 150 x 85 mm

Auction-ID: A1-41964-243

Auction-ID: A1-41964-26

Caution without gas tank Auction-ID: A1-40136-64

Viewing by appointment Auction-ID: A1-43890-65

Equipped with separate 400V battery charger. Auction-ID: A1-40136-276

In working order, battery drains quickly. Auction-ID: A1-40136-211

Shaft forks 1 pair PAGUS 1300 x 800 x 100 mm Fork width: 120 mm Fork height: 40 mm Shafts Ø: 50 mm used,, tested ! Dimensions: 1300 x 800 x 300 mm

starts and drives but cervo defective - bodywork and interior signs of wear (see photos) Auction-ID: A3-43369-10625

good driving car Auction-ID: A1-42015-196

Auction-ID: A1-41964-313

Punching PAGUS punching punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Biscuit forming machine Biscuit machine Janssen FM126M8 - Pastry forming machine - Manufacturer: Janssen - Model: FM 126 M8 - 380 volts

Includes extendable forks, 2350mm Auction-ID: A1-41964-43

Auction-ID: A1-41964-104

Auction-ID: A1-41964-25

Fork positioner Auction-ID: A1-41964-45

Please note, engine needs maintenance! Auction-ID: A1-42015-187

Auction-ID: A1-41964-217

2-roll flow-forming line NAM600S General condition: practically new / already out of service Scraper device (around the tailstock) Working stroke max. 500 mm Scraper force, infinitely variable from 50 - 200 kN Hydrau I i k / lubrication / cooling system Drive power Hydraulics approx. 75 kW Olin content Hydraulic tank approx. 1,500 I Equipment/Com ponents Hyd raulics Make Parker Hannifin Drive power oil lubrication approx. 4.4 kW Olin content Lubricant tank approx. 600 I Equipment/Com ponents Lubricant system Make Parker Hannifin Connected load Cooling system approx. 2.2kW lnhalt Coolant tank approx. 650 I Powerful coolant supply, adjustable 0 - 200 l/min. Cooling water requirement hydraulics + lubrication approx. 2.500 /h Cooling water flow temperature max. 25´C min. Cooling water differential pressure 2bar Cooling water system jerk max. 5 bar Compressed air system pr ...