line for juice used for sale

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

Injection molding machine, clamping force control unit, control unit -Manufacturer: Demag Kunststofftechnik, clamping force control unit -Type: DMS-SKR 79/5 ID no. 064 929 65 RMS -Dimensions: 165/95/H95 mm -Weight: 0.7 kg

Electrode tongs, electrode device, electrode welding device -Electrode clamp: cable without plug -Length: 5m -Weight: 4.5 kg

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, Timetronic ECO JH charger -Type: D400 G 24/70 B-ETIS -Input voltage: 400V 50-60Hz -Power: 24V/70A -Dimensions: 500/500/H730 mm -Weight: 55 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type GFWEA/W 24/70 -Input voltage: 220V 50Hz -Power: 25.2V/70A -Dimensions: 555/360/H690 mm -Weight: 55 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Transnorm Rising falling Incline with arch and forerun belt conveyor GF 7600-700-600 RA2101 Technical data: Conveyor length (NL): 7600 mm (800 mm forerun + 6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7600 Nominal / outside width ...

Transnorm Rising falling Incline with forerun belt conveyor GF 4780+800-700-600 RA2103 Technical data: Conveyor length (NL): 5580 mm (800 mm forerun + 4780 mm incline ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5580 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

crane fork, loading fork, load fork, pallet fork, pallet crane fork -Crane fork: with manual balancing -Load capacity: kg -Tine length: 730 mm -manual weight compensation -Fork: adjustable up to 1040 mm -Useful height: adjustable 1170 to 1960 mm -Dimensions: 1060/865/H1130 mm -Own weight: 108 kg

Transport carriage IVG, built in 2020, craneable, load capacity 3to, unused. Transport carriage IVG, YOC 2020, unused, load capacity 3to, for the transport of turbine shafts or other objects, craneable, with reinforced attachment points for slipping or for safe transport with a forklift. Multiple presents. Dimensions approx. 2,400x750x500mm Dimensions approx. 2,400x750x500mm Dimensions approx. 2,000x750x500mm

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: DETA, charger type WE 24/64 S -Input voltage: 220 V 50 Hz -Power: 24 V/64 A -Dimensions: 455/380/H810 mm -Weight: 51 kg

Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger type E 24/50 SL -Input voltage: 220 V 50 Hz -Power: 24 V/50 A -Dimensions: 555/430/H750 mm -Weight: 50 kg

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type DLW 12/20 SN -Input voltage: 220 V 50 Hz -Power: 12 V/20 A -Dimensions: 410/200/H340 mm -Weight: 12 kg

Specifications: - Total width approx. 800 mm - Work surface length / web length approx. 120 mm - Working surface depth / web depth approx. 120 mm - Total depth approx. 100 mm - Round horn approx. 340 mm - Square horn approx. 340 mm - Anvil height with substructure approx. 820 mm - Anvil weight approx. 65 kg - Substructure approx. W 420 x D 420 x H 300 mm - Substructure mounting hole 85 mm - Weight of substructure approx. 35 kg

lifting mast, stacker mast, forklift mast, lifting frame, rear loader -Manufacturer: Clark, forklift mast from forklift type C500-Y80 -Load capacity: approx. 4000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Dimensions: 1245/420/H2350 mm -Weight: 1120 kg

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor -Fork carriage: without forks -Load capacity: 1500 kg -Beam width: 2500 mm -Forks: available in a wide selection -Total dimensions: 2500/130/H400 mm -Weight: 370 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1140 mm -Cross-section: 130 x 55 mm -Recording: see photos -Transport dimensions: 1330/690/H135 mm -Total weight: 167 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader type AS 60/18/15 -Load capacity: approx. 6000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3200/1620/H750 mm -Weight: 2100 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

Force gauge, force measuring device, calibration, force measurement technology, scale, crane scale, hanging scale -Manufacturer: dynafor , tensile force measuring device crane scale -Measuring range: up to 20 t -Dimensions box: 490/160/H160 mm -Total weight: 12 kg

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

Weight: 0,08 tons Length mm: 1900 Width mm: 550 Height mm: 700 Condition machine : Moderate Photos/film available: Photos available

-Continuous forms Collator Bama -Year 1990 -Six stations -Continuous delivery with speed controls -Crimp lock, Multiflex on both sides -Gears size 8”-11”-12”

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Slot width: 25 mm -Dimensions: 320/65/H40 mm -Weight: 3.8 kg

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.

ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well

Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...

Forklift battery charger, industrial charger -Output: 36 volts -Power: 50 A -Connection: 220 volts -Dimensions: 560/350/H355 mm -Weight: 40 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 63 A -Connection: 220 volts -Weight: 110 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 64 A -Connection: 220 volts -Weight: 50 kg

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling machine -Bevel length: max. 10 mm -Strength: 40 kg/mm² -220 V 1800 W -470 strokes/min -Weight: 15 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested

Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800

Drive gear for hot forging press K8548 6300T Weight, kg 15 700