line for juice used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/JYUjqmzysFk - Former Linde full-service device - Next service due in 413 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Full cab without driver's door with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-50404-235

FORD 8700 – 4x4 – 6 CYLINDER DIESEL – 1978 – TO REPAIR For sale: Ford 8700 agricultural tractor, emblematic model of the Ford range, first put on the road on 12/01/1978. A robust and sought-after tractor, offered here in its current state with engine problem. This Ford 8700 is equipped with a 6-cylinder diesel engine, a mechanical transmission and 4-wheel drive. It has an enclosed cab, a 3-point rear hydraulic linkage, a rear PTO as well as hydraulic connections allowing the use of different agricultural equipment. The meter shows approximately 5,581 hours (meter reading). Key features: • Brand: Ford • Model: 8700 • Year: 1978 • Diesel – 6 cylinders • Power: approx. 81 kW / 110 hp • 4WD • Manual gearbox • Enclosed cabin • 3-point hydraulic linkage • Rear PTO • Rear hydraulic connections • Agricultural tyres • Indicated curb weight: 6,002 kg � ...

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50404-3759

new and unused for batteries with 600-900Ah possible without 16A and Rema plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50404-4821

Battery from former Linde Service 830x630x630mm Voltage at rest measured at 51.76 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-50404-1160

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-50404-3441

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/z1OkI9O7-9I - Former Linde full-service device - Next service due in 410 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Integrated scale - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Safety light on the side - Rear camera - Comfort seat with lumbar support and seat heating - LPG gas tank, convertible to gas exchange bottle on request Auction-ID: A1-50404-99

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/JivPa0CGnEU - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 02/2021 48V 5PzS 775Ah, voltage measured at rest with 50.3 V - Triplex mast with full free lift - 3rd valve, sideshift - Side fall-out protection (can be easily dismantled) - LED front work light - Warning light orange - Safety light at the rear - Comfort seat Auction-ID: A1-50404-211

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50404-3727

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/8-yLCzHU-a8 - Former Linde full-service device - Next service due in 519 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating - LPG gas exchange bottle (quick to exchange, available everywhere) Auction-ID: A1-50404-233

new and unused for batteries with 600-900Ah possible without 16A and Rema plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50404-4820

Charger 48V 130Ah with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-50404-3608

Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Line Former NAM 1.2-08 -Component: from a DMT CD 480 lathe -Dimensions: 320/105/H390 mm -Weight: 12.9 kg

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Auction-ID: A3-46164-4057

Deighton forming machine, Type: Formatic R2200 / 180, Serial number: R2200/22/10/368, Capacity: max 4400 products per hour, Hopper: 20 litres, Belt width: 120 mm, Power: 230VAC, 1Ph, 50Hz, 0.75kW, Dimensions: 1150 x 900 x 1500 mm, Weight: 95 kg, Deighton flattening conveyor, Type: FL, Serial number: FL 16/04/036, Belt width: 175 mm, Power: 230VAC, 1Ph, 50Hz, 0.18kW, Dimensions:1450 x 650 x 1200mm, Weight: 48 kg, Deighton preduster, Type: 200W Econodust M/C, Serial number: ED 22/09/068, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.51kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton battering machine, Type: 200W weir Econorobe M/C, Serial number: WER 22/09/067, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.88kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton mixer, Type: Batter mixer, Serial number: M 22/10/073, Mixer: 200 litres, Power: 230VAC, 1Ph, 50Hz, 1.5kW, Di ...

A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible.

Specifications: Temperature Range (°C): Ambient +5 to 220 Capacity (L): 53 Auction-ID: A1-50093-233

Specifications: Temperature Range:50°C... 300°C Capacity: 112 L Convection Type: Forced Convection Auction-ID: A1-50093-45

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: THK, 4 pieces guide rails with 8 pieces guide carriages/slides -Guide carriage: Type SR -Rail length: 410/340 mm -Rail width: 23 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 410/100/50 mm -Weight: 6.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 20mm long version -Bolt circle: Ø 43x6 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 54 x 80 mm -Weight: 0.2 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 16mm long version -Bolt circle: Ø 35x5 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 46 x 68 mm -Weight: 0.1 kg/piece

Pastry Line Refurbishment Line Rondo Jumbolino SPF 610 C Year of Make: 2002 Condition: functional Incl. cutting rollers, folding shoes, accessories, etc. Double cutting station Residual dough/waste marker with collection container Sprayer Pneumatic Filling Device Spreading device Roll-up Guillotine Belt travel direction left Belt width approx. 640 mm Total length approx. 8250 mm 

5 feeding lines, 5 drinking lines ___ opliermotoren____ end motors ___ control box and accessories Auction-ID: A3-46162-2749

Used bread roll line KÖNIG, type: Combiline Classic Rex Futura -in bakery condition- - Head machine / dough divider Classic Rex Futura - Weight range: approx. 30 - 140g - 5, 4 or 3 rows can be used - KÖNIG touch control panel - Settlement on sheet metal Visits and test runs are possible by arrangement.

Used bread roll line KÖNIG, type: Classic Rex 6-row with ECO Twin 800 -In bakery condition- For sliced rolls, emperor rolls and double rolls - Classic Rex head machine with up to 6 rows - 6, 5 or 4 rows can be used - Pre-proofer Eco Twin 800 - With SIEMENS SIMATIC control system - Integrated long scooter - Settlement on sheet metal - Cooking cabinet capacity: 4,200 - 5,040 pcs. / h - Capacity Classic Rex: max. 9,000 pcs. / h - Weight range: 30 - 100g - in bakery condition, immediately ready for use Viewing and test run are possible by arrangement. Further information on request. Subject to prior sale.

Used bread roll line KÖNIG, type: Classic Rex 6-row with ECO Twin 900/800 -In bakery condition- For sliced rolls, emperor rolls and double rolls - Classic Rex head machine with up to 6 rows - 6, 5 or 4 rows can be used - Pre-proofer Eco Twin 9000/800 K6 - With SIEMENS SIMATIC control system - Integrated long scooter - Placement on sheets AB800/1000 for sheets max. 80x100cm - in bakery condition, immediately ready for use - Cooking cabinet capacity: 4,200 - 5,040 pcs. / h - Capacity Classic Rex: max. 9,000 pcs. / h - Weight range: 30 - 100g Viewing and test run are possible by arrangement. Further information on request. Subject to prior sale.

Audi A5 S Line Quattro Coupe Mileage: 188,932 km Automatic transmission Engine not running Hobbyist vehicle / accident vehicle / spare parts dispenser Sold expressly as a non-roadworthy hobbyist vehicle or spare parts warehouse Vehicle is in severely damaged condition Heavy front damage Hood massively damaged and deformed Front bumper badly damaged / partially torn off Radiator area / front area badly damaged Right front area massively damaged Right headlight is missing/damaged Right front fender badly damaged Damage visible in the area of the right front wheel arch Windshield massively cracked Multiple airbags deployed Driver airbag triggered Passenger airbag deployed Side/head airbags deployed S Line equipment Quattro Black interior Sports seats MMI / multimedia system available Multifunction steering wheel Alloy wheels Loose vehicl ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Mass of falling parts: 1000 kg Ram stroke: 800 mm Energy of full blow: 3600kgm Quantity of stroke: 110 Mass of hammer: 35t Year of production: 1974r.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Ram stroke: 750 mm Energy of full blow: 1840 kgm Quantity of stroke: 120 u/min Mass of anvil block: 12,5 t Mass of hammer with anvil block: 21,9 t

Format sliding table: 3200mm Engine power: 400V 5.5 KW (7.5hp) Cutting height: 125mm Saw blade: 300-400mm swivel: 90-45 electrically pivotable and height-adjustable Industrial scoring unit for 120mm scoring saw blade Parallel cutting width: 1500mm

Max. capacity 1000 tons Slide stroke 240 mm Shut-height (max.) 650 mm Wedge adjustment 10 mm Number of slide strokes 100 rp

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...