line for electric used for sale

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Battery 80V/8PzQ/1376Ah from former Linde Service Voltage in idle mode uncharged 82.92V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1015

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk A mast that is too high can be dismantled and loaded for transport on request. Youtube function and state video: https://youtu.be/QCyDKzEt9RM - Former Linde full-service device - Next service due in 882 operating hours - UVV valid until 04/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Multiple fork adjuster + sideshift (easy fork adjuster possible on request) - Full cabin with radio, heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45451-5

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/JORAWCzdmyA - Former Linde full-service device - Service only in 314 operating hours - UVV valid until 04/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; 170cm wide fork adjuster with sideshift - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat with lumbar support and seat heating - Trailer hitch Auction-ID: A1-45451-144

Led work lights front and rear, blue spot, flash light, illuminated document holder, no marking bands Auction-ID: A3-43525-286

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video: https://youtu.be/82h7gdMgtRM - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 05/11/2018 48V 4PzS 620Ah, very good performance measured with 49.9V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Roof pane - Comfort seat Auction-ID: A1-45451-252

- Fork length 750mm - Side shift - Hydraulic lines - Suitable for mini skid steer loader - New Auction-ID: A3-43524-126

Led work lights front and rear, blue spot, flash light, illuminated document holder, no marking bands Auction-ID: A3-43525-285

Very neat and powerful 4x4 all-terrain forklift of the brand MYCHEKI, type Y25-42. This machine is practically unused and combines compactness with strong performance. Thanks to its low weight, it is easy to transport, while the lifting capacity remains impressive - Key features: 4x4 drive – ideal for rough terrain ✔ Side shift ✔ Automatic fork positioner ✔ Closed cab ✔ Cab with heating and ventilation ✔ Compact and highly manoeuvrable ✔ Low operating hours - Capacity: Lifting capacity: ± 2000 kg, Up to ± 3500 kg with counterweight (approved) - rear part can be filled with concrete Transport advantage: With a weight of only 2400 kg, this forklift is easy to transport with a trailer or truck. Applications: Agriculture, Construction / yard, Yard / stable, Outdoor warehouse - Condition: Very good condition, virtually unused and ready for immediate use. Auction-ID: A3-435 ...

Youtube function and status video: https://youtu.be/8MElVOGQ2uk Former Linde full-service machine next service due in 453 hours - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork Adjuster + Sideshift Auction-ID: A1-45451-87

Youtube function and status video: https://youtu.be/UYUo-YKPjXY Former Linde full-service machine next service due in 658 hours next UVV not due until 01/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heater and windshield wipers - 3rd + 4th valve; 4-fold tine adjuster + sideshift (simple tine adjuster possible on request) - Pneumatic tyres Auction-ID: A1-45451-197

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/k7v9nwCFAqA - Former Linde full-service device - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Front camera - Comfort seat with lumbar support and seat heating - LPG gas exchange bottle (quick to exchange, available everywhere) - Attention: Engine steering noise Auction-ID: A1-45451-162

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-45451-4850

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3676

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3665

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/NfqjOrhMY80 - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 22/2017 48 V 775 Ah, very good performance measured with 50.0V - 3rd + 4th valve; Fork Adjuster 15-84cm with Sideshift Auction-ID: A1-45451-262

FEM3: Fits any forklift with a load capacity of 3,000-5,000kg Fork length: 120cm Function video: https://youtube.com/shorts/qkhtKA84O10?feature=share Auction-ID: A1-45451-1152

Bolzoni Auramo side shift fork positioner, front work lights, flash light, gold edition Auction-ID: A3-43525-280

Professional industrial dowel drilling machine from Vitap, type FORMA / TURIN 2, built in 1999. Machine is functional, solidly built and ideal for precise drilling of dowel connections in solid wood and sheet material. The machine is equipped with a multi-spindle drilling unit and pneumatic clamping for fast and efficient series work in furniture and interior construction. Technical data Brand: Vitap Type: FORMA / TURIN 2 Year of construction: 1999 Power supply: 380V – 50Hz Weight: approx. 440 kg Pneumatic control Industrial heavy duty CE version - Equipped with: Multi-spindle dowel drilling unit, Left/right rotating drill spindles, Pneumatic workpiece clamping, Adjustable guides and stops, Foot operation, Precise mechanical adjustments, Robust linear guides - possibility of 38 drillings - including box of drills Auction-ID: A3-43525-10916

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3540

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3510

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3565

Battery set complete with interchangeable frame from former Still Service Battery fits many Still FM-X and Linde R reach trucks (simply compare dimensions LxWxH). Very good performance measured at 50.99 V. Loading onto trucks with forklift trucks. Auction-ID: A1-45451-1080

Battery set complete with interchangeable frame from former Still Service Battery fits many Still FM-X and Linde R reach trucks (simply compare dimensions LxWxH). Very good performance measured at 52.04 V. Loading onto trucks with forklift trucks. Auction-ID: A1-45451-1083

New hydraulic motor New shock absorbers New air cushions Brake pot Recent tires Gable and full floor revised The front axle ring (ball ring) less than 1 year old Ready to ride Auction-ID: A3-43524-35508

FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 mm Auction-ID: A1-45451-1103

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jlj3v4fdPWA Former Linde full-service machine next service only due at 2,200 hours next UVV not due until 02/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heater and windshield wipers - 3rd + 4th valve; Fork Adjuster + Sideshift - Comfort seat with lumbar support and seat heating - LED front work light - LED work light at the rear - Warning light orange - Blue safety light at the rear - LPG gas cylinders quick-change comfort system. - Base plate for towbar Auction-ID: A1-45451-65

diesel power generator Brand: Ford power: 8,125 kVA Engine: 498 cc diesel engine Starting: Electric starter motor Sockets: 1 x 400 volts (CEE 3P+N+E) 1 x 230 volt (CEE 2P+E) 1 x 230 volts (CEE 7/3 – Schuko) Protection: circuit breaker and emergency stop Housing: Soundproofing housing Display: LED Display Keys: 2 keys Weight: 165 kg Degree of protection: IP44 Condition: unused, in the original packaging Auction-ID: A3-43525-541

REMA 160A Battery Plug 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3378

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-2450

Youtube function and status video: https://youtu.be/KAoDSuEIAvc - Former Linde service device - Next service only in 457 hours - UVV valid until 01/2026 - 3rd + 4th valve; Fork adjuster 22-148 cm with sideshift Auction-ID: A1-45451-165

Protection for driving on public roads. Fits any fork with width 8-20cm. Loading onto trucks no problem Auction-ID: A1-45451-1064

Battery in order, charger included, immediate operation. Auction-ID: A3-43525-39028

Dutch registration transfer costs buyer Export by name 100 euros Auction-ID: A3-44483-5416

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 300-800Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45451-4851

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3462

CNC Milling Machine - Heidenhain TNC 310 with handwheel - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure x-travel 600 mm y-travel 400 mm z-travel 400 mm Table size 800 x 400 mm Spindle holder ISO Sk 40 Spindle speeds: 10 - 3150 rpm Quill stroke mm Total power requirement 12.0 kVA Machine weight approx. 2.2 t Dimensions L x W x H 2.0 x 1.85 x 1.95 m Auction-ID: A7-46460-587

Meyer 4 fork system, front and rear work lights, blue spot, flash light, battery with automatic filling, new tires Auction-ID: A3-43525-282

Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-45451-1174

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3675

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3623

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Cb1yBDERkBE Former Linde full-service machine next service not due until 8,250 hours next UVV not due until 02/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heating, AC air conditioning and windshield wipers - 3rd valve; with sideshift - 4. Valve for tine adjuster - RedSpot, camera front, double pedal - High-quality pneumatic tires Auction-ID: A1-45451-23

Heavy duty and robust Clark diesel forklift with a lift capacity of 6 tonnes at 600 mm load centre. This machine is built for industrial use and is known for its reliability and simple engineering. The forklift is working and recently equipped with a new battery, making it immediately deployable. Ideal for heavy-duty applications in industry, agriculture, warehousing or logistics. Main features: Lifting capacity: 6000 kg, Lifting height: approx. 3.45 meters, Diesel version, Strong and reliable Clark technology, Solid forks, Easy to maintain - Condition: Used, with normal signs of wear. Works properly. 1 work light defective. Auction-ID: A3-43525-10906

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Tjd0oqbzxks - Former Linde full-service device - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat - Attention: drives slowly, error in the display Auction-ID: A1-45451-73

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/RE-BQQs6DaQ - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 27/10/2017 48V 5PzS 700Ah, very good performance measured with 50.0V - Triplex mast with full free lift - 3rd valve, sideshift - 4th valve, push forks 115-240cm - Roof pane - Rear camera - Integrated scale Auction-ID: A1-45451-240

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3681

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3556

Jungheinrich charging station for industrial trucks Industrial Charging Station, Battery Maintenance Stand If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has a charging station with Tecna spring balancer that keeps the charging cable in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancer for ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufacture: 2023 Without charger "Everything fro ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/cf28_BwtBUo - Former Linde full-service device - Service due in 813 operating hours - UVV valid until 05/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with radio, heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-45451-46

Frequency: 50 Hz; Rated power: 6.0 kVA/7.5 kVA; Max. power 6.3 kVA/8.125 kVA; Voltage V 230/400 V; Current A 25.2/11.4 A; Connections 16A & 32A; LED display; Fuel tank capacity L 15 ; Operating time at 75% load H 7; Noise level at 7 m dBA 72; DC output V/A 12/8.3 V; Battery V/Ah 12/30 V; ENGINE 192FE; Engine type Diesel; Power hp 12; Start electric; Cubic capacity CC 498; Oil capacity L 1.65; AL6-T ALTERNATOR; Power kW 6; Power factor 1 / 0.8; Tension regulation Brush/AVR; DIMENSIONS & WEIGHT Net weight kg 151 Gross weight 163 kg; Machine dimensions: 850x525x665 mm; Package dimensions: 870x550x820 mm; FC L20'/40'HQ 72/156; Unused in box Auction-ID: A1-41995-97

exhaust manifold leaks runs a bit erratically Auction-ID: A1-42016-141